Factors affecting human reliability in the chemical process industry

This research was concerned with identifying factors which may influence human reliability within chemical process plants - these factors are referred to as Performance Shaping Factors (PSFs). Following a period of familiarization within the industry, a number of case studies were undertaken covering a range of basic influencing factors. Plant records and site `lost time incident reports' were also used as supporting evidence for identifying and classifying PSFs. In parallel to the investigative research, the available literature appertaining to human reliability assessment and PSFs was considered in relation to the chemical process plan environment. As a direct result of this work, a PSF classification structure has been produced with an accompanying detailed listing. Phase two of the research considered the identification of important individual PSFs for specific situations. Based on the experience and data gained during phase one, it emerged that certain generic features of a task influenced PSF relevance. This led to the establishment of a finite set of generic task groups and response types. Similarly, certain PSFs influence some human errors more than others. The result was a set of error type key words, plus the identification and classification of error causes with their underlying error mechanisms. By linking all these aspects together, a comprehensive methodology has been forwarded as the basis of a computerized aid for system designers. To recapitulate, the major results of this research have been: One, the development of a comprehensive PSF listing specifically for the chemical process industries with a classification structure that facilitates future updates; and two, a model of identifying relevant SPFs and their order of priority. Future requirements are the evaluation of the PSF listing and the identification method. The latter must be considered both in terms of `useability' and its success as a design enhancer, in terms of an observable reduction in important human errors.

Determinants of sales performance in insurance industry:a cross-cultural comparison between the UK and Malaysia

This thesis is concerned with an empirical investigation of the factors that predict a successful salesperson, using a cross-cultural comparison of two countries: the UK and Malaysia. Besides collecting quantitative data, qualitative data on organisational, environmental and cultural factors were also collected through interviews, personal and case observations. The quantitative data consist of sixteen independent factors and three dependent factors. The independent variables include self-efficacy, self-esteem, locus of control, self-monitoring, extrinsic motivation, intrinsic motivation, experience, training perception, role ambiguity, role conflict, role inaccuracy, gender, age, education, race and religion. The dependent variables are performance target achieved, performance earnings and performance ratings. Questionnaires were distributed to about 500 salespersons in each country, from three insurance companies in the UK and two insurance companies in Malaysia. Response rates were 75 and 50 percent from the UK and Malaysia respectively. The survey results indicated that a salesperson's performance in the UK is predicted by self-efficacy, internal locus of control, self-esteem, extrinsic motivation, experience, training perceptions, role conflict and gender. In Malaysia, a salesperson's performance is predicted by self-efficacy, self-monitoring, experience, role conflict, role ambiguity, education, gender, race and religion. Self-efficacy, experience, role conflict and gender are common predictors of salespersons' performance in both cultures. The likely explanation for these results is culture differences, i.e. UK has a homogeneous culture, while Malaysia has a heterogeneous one. Results from the case observations, such as organisational and environmental factors, give supporting evidence in explaining the empirical results. Implications from the findings are discussed from two aspects: (1) theoretical implications for divergence/convergence theory, Hofstede's model, Churchill's model, and (2) managerial implications for selection, training, motivation and appraisal.

Minority enterprise in the clothing industry: an analysis of Asian jeans manufacturers in Birmingham

This thesis discusses and assesses the resources available to Asian entrepreneurs in the West Midlands' clothing industry and how they are used by these small businessmen in order to address opportunities in the market economy within the constraints imposed. The fashion industry is volatile and is dependent upon flexible firms which can respond quickly to shortrun production schedules. Small firms are best able to respond to this market environment. Production of jeans presents an interesting departure from the mainstream fashion industry. It is traditionally gared towards longrun production schedules where multinational enterprises have artificially diversified the market, promoting the 'right' brand name and have established control of the upper end of the market, whilst imports from Newly Developing Countries have catered for cheap copies at the lower end of the market. In recent years, a fashion element to jeans has emerged, thus opening a market gap for U.K. manufacturers to respond in the same way as for other fashion articles. A large immigrant population, previously serving the now declining factories and foundries of the West Midlands but, through redundancy, no longer a part of this employment sector, has ~5ponded to economic constraints and market opportunities by drawing on ethnic network resources for competitive access to labour, finance and contacts, to attack the emergent market gap. Two models of these Asian entrepreneurs are developed. One being somecne who has professionally and actively tackled the market gap and become established. These entrepreneurs are usually educated and have personal experience in business and were amongst the first to perceive opportunities to enter the industry, actively utilising their ethnicity as a resource upon which to draw for favorable access to cheap, flexible labour and capital. The second model is composed of later entrants to jeans manufacturing. They have less formal education and experience and have been pushed into self-employment by constraints of unemployment. Their ethnicity is passively used as a resource. They are more likely confined to the marginal activity of 'cut make and trim' and have little opportunity to increase profit margins, become estalished or expand.

Formative experience [postgraduate industrial experience]

Producing the graduates that industry wants is more complicated than simply cramming them full of the right knowledge; they must also develop the confidence and understanding to serve the needs of their future employers. This can only be gained from experience in a real manufacturing environment. The authors describe the pioneering approach to industrial experience given to postgraduates at Cranfield University.

Which factors drive firm survival within an industry boundary over time?:the UK onshore oil and gas production industry 1984-1999

This thesis looks at the UK onshore oil and gas production industry and follows the history of a population of firms over a fifteen-year period following the industry's renaissance. It examines the linkage between firm survival, selection pressures and adaptation responses at the firm level, especially the role of discretionary adaptation, specifically exploration and exploitation strategies.Taking a Realist approach and using quantitative and qualitative methods for triangulation on a new data base derived from archival data, as well as informant interviews, it tests seven hypotheses' about post-entry survival of firms. The quantitative findings suggest that firm survival within this industry is linked to discretionary adaptation, when measured at the firm level, and to a mixture of selection and adaptation forces when measured for each firm for each individual year. The qualitative research suggests that selection factors dominate. This difference in views is unresolved. However the small, sparse population and the nature of the oil and gas industry compared with other common research contexts such as manufacturing or service firms suggests the results be treated with caution as befits a preliminary investigation. The major findings include limited support for the theory that the external environment is the major determinant of firm survival, though environment components affect firms differentially; resolution of apparent literature differences relating to the sequencing of exploration and exploitation and potential tangible evidence of coevolution. The research also finds that, though selection may be considered important by industry players, discretionary adaptation appears to play the key role, and that the key survival drivers for thispopulation are intra-industry ties, exploitation experience and a learning/experience component. Selection has a place, however, in determining the life-cycle of the firm returning to be a key survival driver at certain ages of the firm inside the industry boundary.

Lessons for African economies from Irish and East Asian industry policy

When comparisons in terms of industrial policy lessons to be learned have taken place, it has tended to be solely vis-a-vis the ‘development state’ East Asian experience. This paper broadens the analysis and considers lessons which African countries can learn from other so-called ‘tiger’ economies including Ireland and the East and South Asian countries. We recognise that the latter are indeed clearly significant as many African countries at the time of independence had economic structures and levels of income quite similar to East Asian countries, yet have grown at vastly different rates since then. Exploring why this has been the case can thus offer important insights into possibilities for industrial policy. Yet this comes with some health warnings over East Asian experience. We suggest that another important contribution can come by looking at the Irish example, given its emphasis on corporatism rather than simply relying on state direction in the operation of industrial policy. The Irish model is also more democratic in some senses and has protected workers’ rights during the development process in contrast to the often highly dirigisite East Asian model. Overall we suggest that some immediate actions are needed, notably with regard to the financial system in small African economies. Without such changes, a poorly functioning financial system will continue to keep investment at low levels. In relation to the small size of the African economies, the paper recommends regional integration and sufficient overseas development assistance (ODA) for infrastructural development. It is also critical to note that the various small African economies each face their own industrial and economic development challenges, and that a ‘one size fits all’ approach is not appropriate; rather the key is to tailor policies and systems to the unique opportunities and development challenges in each African country.

Work-based HE pathways for the electrical power engineering industry

Aston University has been working closely with key companies from within the electricity industry for several years, initially in the development and delivery of an employer-led foundation degree programme in electrical power engineering, and more recently, in the development of a progression pathway for foundation degree graduates to achieve a Bachelors-level qualification. The Electrical Power Engineering foundation degree was developed in close consultation with the industry such that the programme is essentially owned by the sector. Programme delivery has required significant shifts away from traditional HE teaching patterns whilst maintaining the quality requirement and without compromise of the academic degree standard. Block teaching (2-week slots), partnership delivery, off-site student support and work-based learning have all presented challenges as we have sought to maximise the student learning experience and to ensure that the graduates are fit-for purpose and "hit the ground running" within a defined career structure for sponsoring companies. This paper will outline the skills challenges facing the sector; describe programme developments and delivery challenges; before articulating some observations and conclusions around programme effectiveness, impact of foundation degree graduates in the workplace and the significance of the close working relationship with key sponsoring companies. Copyright © 2012, September.

Exploring value-added applications of RFID systems in industry and service sectors

Radio-frequency identification technology (RFID) is a popular modern technology proven to deliver a range of value-added benefits to achieve system and operational efficiency, as well as cost-effectiveness. The operational characteristics of RFID outperform barcodes in many aspects. One of the main challenges for RFID adoption is proving its ability to improve competitiveness. In this paper, we examine multiple real-world examples where RFID technology has been demonstrated to provide significant benefits to industry competitiveness, and also to enhance human experience in the service sector. This paper will explore and survey existing value-added applications of RFID systems in industry and the service sector, with particular focus on applications in retail, logistics, manufacturing, healthcare, leisure and the public sector. © 2012 AICIT.

The role of academic/industry partnerships in the development of supply chain managers

The need for improvement in the logistics and supply chain management capability of companies in Ireland is becoming increasingly recognised. One of the main bottlenecks currently is the shortage of supply chain management professionals. Education and training has a fundamental role to play if the supply of suitably qualified human resource is to be addressed in a meaningful way. Recent research indicates that demand for people with the right knowledge and skills greatly exceed supply. There are numerous techniques and technologies which can facilitate improvement in a company’s supply chain capability. However, experience has shown that these tools alone can not address the weaknesses – any improvement tool is only as good as a company’s ability to utilise it and effective utilisation depends above all on the knowledge and skill of employees. Education and training is essential in developing the requisite knowledge and skills. Consultants can play a role in terms of providing an objective view of a company’s requirements. But the only way to generate a sustainable competitive advantage is to ensure that the necessary knowledge and skills are available in-house. Indeed, the “consultancy culture” which has developed in many companies is a direct result of this lack of in-house expertise. Given the shortage of suitably qualified and experienced people in the job market, the only way that this problem can be addressed is through effective development of existing staff. This paper describes the partnership model adopted by the NITL to achieve its objective of combining academic excellence with real relevance to commercial needs in its supply chain management development programmes. The Executive Development Programme (EDP) is used to illustrate how the model is implemented.

Making the construction industry resilient to extreme weather:lessons from construction in hot weather conditions

The construction industry is susceptible to extreme weather events (EWEs) due to most of its activities being conducted by manual workers outdoors. Although research has been conducted on the effects of EWEs, such as flooding and snowfall, limited research has been conducted on the effects of heatwaves and hot weather conditions. Heatwaves present a somewhat different risk profile to construction, unlike EWEs such as flooding and heavy snowfall that present physical obstacles to work onsite. However, heatwaves have affected the construction industry in the UK, and construction claims have been made due to adverse weather conditions. With heatwaves being expected to occur more frequently in the coming years, the construction industry may suffer unlike any other industry during the summer months. This creates the need to investigate methods that would allow construction activities to progress during hot summer months with minimal effect on construction projects. Hence, the purpose of this paper. Regions such as the Middle East and the UAE in particular flourish with mega projects, although temperatures soar to above 40̊C in the summer months. Lessons could be learnt from such countries and adapted in the UK. Interviews have been conducted with a lead representative of a client, a consultant and a contractor, all of which currently operate on UAE projects. The key findings include one of the preliminary steps taken by international construction companies operating in the UAE. This involves restructuring their entire regional team by employing management staff from countries such as Lebanon, Palestine, Iraq, and their labour force from the sub-continent such as India and Pakistan. This is not only due to the cheap wage rate but also to the ability to cope and work in such extreme hot weather conditions. The experience of individuals working in the region allows for future planning, where the difference in labour productivity during the extreme hot weather conditions is known, allowing precautionary measures to be put in place.