Editorial

This special issue covers the significant activities and outputs of the European Commission funded Bioenergy Network of Excellence that has recently completed its six year programme of work. Networks of Excellence (NoE) were intended to address fragmentation of R&D in the European Research Area by integrating resources and expertise needed to enhance Europe’s global competitiveness in key areas. The Bioenergy NoE consortium consists of eight key bioenergy R&D institutes in Europe and covered the entire field of bioenergy. Within the project, the overall strategy to achieve integration followed a well defined process of firstly identifying barriers, then evaluating RTD goals for their removal, followed by a detailed examination of how integration could be realistically achieved and implemented in the longer term. This is described in the first paper by Sipilä and Wilén. The rest of the contents of this special issue are devoted to collaborative outputs of the various joint research activities undertaken during the project that cover biomass, conversion technology, and finally policy and education. Progress was influenced by a number of additional EU instruments launched during the project including the European Industrial Technology Platforms and ERA-NET Bioenergy. These led to the EIBI (European Industrial Bioenergy Initiative) and particularly EERA Bioenergy (European Energy Research Alliance – Bioenergy), which is very effectively continuing the work of Bioenergy NoE by establishing a framework for continued cooperation and collaboration. The project resulted in a high level of interaction and collaboration in European R&D which is being further developed and expanded within EERA Bioenergy. The value of Bioenergy NoE can thus be clearly seen in the exciting programme of research activities being developed in EERA Bioenergy. During the past six years Bioenergy NoE partners have produced over 1000 publications including reports, papers and poster communications. This special issue of Biomass and Bioenergy includes results from a selection of outputs from Bioenergy NoE.

Creation of relational assets through the 'library of equipment' model:an industrial modernization approach of Japan's local technology centres

SMEs with a weak internal R&D capacity show the tendency to shy away from using external sources of technical expertise. The tendency deters providers of industrial modernization services from supporting such structurally weak SMEs. This paper examines how Japan's local technology centres - kosetsushi - remove the bottleneck and reach out to a significant proportion of SMEs with a weak R&D capacity in their localities. Kosetsushi centres sustain habitual interactions with client firms through 'low information gap' services solving immediate needs and lead the clients to a riskier and longer path toward innovation capacity building. This gives kosetsushi centres a position distinct from universities and consultancies in the regional innovation system. While long-term relationships between kosetsushi centres and their client firms can increase switching costs and produce lock-in effects, a case study of two kosetsushi centres illustrates the importance of 'low-information gap' services and relational assets created thereby to the modernization of SMEs with a weak internal R&D capacity. The paper calls for long-term commitment by the public sector if it addresses the issue through modernization services.

Technology transfer to China:a study of strategy in 20 EU industrial companies

Foreign direct investment has been important in China's economic development since the early 1980s. In recent years, the volume of inward FDI into China, according to some estimates, has been second only to that into the USA. The Chinese government has emphasised the need for FDI to be coupled with the transfer of more advanced technologies to China. For foreign companies, technology transfer raises the risk of losing their technology based competitive advantage to potential competitor firms. This risk may be exacerbated by insufficient legal protection of intellectual property rights in China. After briefly reviewing the development of Chinese official policy on technology transfer, this paper considers the strategy adopted by EU companies regarding the transfer of technology; in particular in advanced technology sectors. The research on which the paper is based included an analysis of information gathered from 20 leading EU companies with investments in China and operating in high-technology sectors. Information was gathered from senior company managers based in both China and Europe during the second half of 1998. The main findings include a measure of reluctance on the part of EU companies to transfer their core technologies to China and to base R&D capability there. At the same time, the companies appear aware that this policy may be unsustainable in the longer-term in the face of Chinese official policy and a desire to expand their operations in China. While they attempt to protect their existing technological knowledge, most of them accept that there will be technology "leakage" and therefore the most effective strategy is to maintain their technological lead through R&D.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Shopfloor attitudes towards advanced manufacturing technology:the changing focus of industrial conflict?

The implementation of advanced manufacturing technology (AMT) in manufacturing organisations is increasing. In many cases the introduction of AMT has been associated with conflict between management and workers. This appears to be due to the potential for AMT to have a de-skilling effect upon job content and, in some instances, leading to job losses. In reality, fears concerning both these issues have reduced and consequently there has been a change away from conflict between management and workers to divisions amongst shopfloor operators. The paper explores some of the processes involved in this change within the context of an engineering case study. More specifically, it is shown that when AMT was introduced into a machining workshop, traditional conflict between management and operators was soon replaced by negative feelings between users and non-users of AMT. The implications of industrial relations suggest the need for more care and attention to the human side of work organisation when implementing new manufacturing technology.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Industrial networks of the future:review of research and practice

Academic researchers have followed closely the interest of companies in establishing industrial networks by studying aspects such as social interaction and contractual relationships. But what patterns underlie the emergence of industrial networks and what support should research provide for practitioners? Firstly, it appears that manufacturing is becoming a commodity rather than a unique capability, which accounts especially for low-technology approaches in downstream parts of the network, for example in assembly operations. Secondly, the increased tendency towards specialization has forced other, upstream, parts of industrial networks to introduce advanced manufacturing technologies to supply niche markets. Thirdly, the capital market for investments in capacity, and the trade in manufacturing as a commodity, dominates resource allocation to a larger extent than previously was the case. Fourthly, there is a continuous move towards more loosely connected entities that comprise manufacturing networks. More traditional concepts, such as the “keiretsu” and “chaibol” networks of some Asian economies, do not sufficiently support the demands now being placed on networks. Research should address these four fundamental challenges to prepare for the industrial networks of 2020 and beyond.

Industrial policy, FDI and employment:still a 'missing a strategy'

This paper contrasts the effects of trade, inward FDI and technological development upon the demand for skilled and unskilled workers in the UK. By focussing on industry level data panel data on smaller firms, the paper also contrasts these effects with those generated by large scale domestic investment. The analysis is placed within the broader context of shifts in British industrial policy, which has seen significant shifts from sectoral to horizontal measures and towards stressing the importance of SMEs, clusters and new technology, all delivered at the regional scale. This, however, is contrasted with continued elements of British and EU regional policy which have emphasised the attraction of inward investment in order to alleviate regional unemployment. The results suggest that such policies are not naturally compatible; that while both trade and FDI benefit skilled workers, they have adverse effects on the demand for unskilled labour in the UK. At the very least this suggests the need for a range of policies to tackle various targets (including in this case unemployment and social inclusion) and the need to integrate these into a coherent industrial strategy at various levels of governance, whether regional and/or national. This has important implications for the form of any 'new' industrial policy.

Meeting technology needs of enterprises for national competitiveness

This paper addresses the question of how enterprises can improve their competitiveness through the acquisition and development of technology, and hence how countries are able to raise the level of industrial development and grow their GDP. It takes the example of East Asia to demonstrate how fast economic growth can be achieved through the 'stages' approach to technology acquisition and development. It also provides some case studies of technology transfer to China as a means of illustrating how successful transfer can be achieved and the problems that can be encountered. Finally, some comparisons are made with, and among, the Arab countries and an attempt is made to draw some lessons for the development of the Arab world from experiences gained elsewhere. Copyright © 2005 Inderscience Enterprises Ltd.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Advanced manufacturing technology adoption in developing countries:the role of buyer-supplier relationships

Purpose – Developing countries are heavily dependent on the resources and commitment of foreign providers to ensure successful adoption of advanced manufacturing technology (AMT). The purpose of this paper is to describe the important role of buyer-supplier relationships (BSRs) in the process of technology selection, acquisition and implementation. Design/methodology/approach – A survey of 147 Malaysian manufacturing firms is the main instrument used in the research investigations and data analysis is carried out by the structured equation modelling (SEM) technique. In particular, the authors examine the impact on performance of different patterns of relationship between technology buyers and suppliers. Findings – Although the majority of the firms reported improvements in their performance since the acquisition of AMT, closer investigation reveals that those demonstrating a closer relationship with their suppliers are more likely to achieve higher levels of technology and implementation performance (IP) than those that do not. Research limitations/implications – The paper only assesses the strength of BSR from the buyers' perspective and they may have limited experience of acquisition, whereas suppliers may have more experience of selling AMT. Also, the research is undertaken in Malaysia and the findings may be different in other countries, especially where the technology being acquired is not imported but sourced locally. Practical implications – The findings relating to BSR, technology acquisition and IP have important implications both for customers and supplier firms as well as for industrial policy makers in developing countries. Originality/value – The result of the research provides useful insights that are especially pertinent to an improved understanding of BSRs in the procurement of capital equipment, about which the current research literature is limited.

Technology transfer under China’s economic reforms:business environment and success factors

The opening up of the Chinese economy and the associated transfer of technology from abroad have been taking place at an accelerating pace. Technology is crucial to China's industrial development. It is a productive resource and has a vital role in the process of economic and social development. This article provides an overview of technology transfer into China, focusing on recent developments, and examines the macroenvironmental and microenvironmental influences which foreign enterprises must consider when making investments or technology transfer decisions. Cases of companies engaged in international technology transfer are used to illustrate the discussion on the microenvironment. To be successful, foreign investors and suppliers of technology must respond to China's industrial priorities and pursue projects that are compatible with the country's broad policy goals as well as the corporate objectives of Chinese partners. The article concludes by listing a number of points to which attention should be paid before a decision is made to transfer technology to China.

Industrial relations in the road passenger transport industry-a political-economic analysis.

This thesis examines the British Bus and Tram Industry from 1889 to 1988. The first determinant of the pattern of industrial relations is the development of the labour-process. The labour process changes with the introduction of new technology (electrified trams and mechanised buses), the concentration and centralisation of ownership, the decline of competition, changing market position, municipal and state regulation, ownership and control. The tram industry, as a consequence of electrification, is almost wholly municipally owned and the history of the labour process from horse-trams to the decline of the industry is examined. The bus industry has a less unified structure and is examined by sector; London, Municipal, and Territorial/Provincial. The small independent sector is largely ignored. The labour process is examined from the horse-bus to the present day. The development of resistance in the labour process is discussed both as a theoretical problematic (the `Braverman Debate') and through the process of unionisation, the centralisation and bureaucratisation of the unions, the development of national bargaining structures (National Joint Industrial Council and the National Council for the Omnibus Industry), and the development of resistance to those processes. This resistance takes either a syndicalist form, or under Communist Party leadership the form of rank and file movements, or simply unofficial organisations of branch officials. The process of centralisation of the unions, bureaucratisation and the institutionalisation of bargaining and the relationship between this process and the role of the Unions in the Labour Party is examined. Neo-corporatism, that is the increasing integration of the leadership of the main Union, the T.G.W.U.with the Labour Party and with the State is discussed. In theoretical terms, this thesis considers the debate around the notion of `labour process', the relationship between labour process and labour politics and between labour process and labour history. These relationships are placed within a discussion of class consciousness.

State intervention in technology in the post war years: case studies in technology policy

This thesis is concerned with the means by which the state in Britain has attempted to influence the technological development of private industry in the period 1945-1979. Particular emphasis is laid on assessing the abilities of technology policy measures to promote innovation. With that objective, the innovation literature is selectively reviewed to draw up an analytical framework to evaluate the innovation content of policy (Chapter 2). Technology policy is taken to consist of the specific measures utilised by government and its agents that affect the technological behaviour of firms. The broad sweep of policy during the period under consideration is described in Chapter 3 which concentrates on elucidating its institutional structure and the activities of the bodies involved. The empirical core of the thesis consists of three parallel case studies of policy toward the computer, machine tool and textile machinery industries (Chapters 4-6). The studies provide detailed historical accounts of the development and composition of policy, relating it to its specific institutional and industrial contexts. Each reveals a different pattern and level of state intervention. The thesis concludes with a comparative review of the findings of the case studies within a discussion centred on the arguments presented in Chapter 2. Topics arising include the state's differential support for the range of activities involved in innovation, the location of state-funded R&D, the encouragement of supplier-user contact, and the difficulties raised in adoption and diffusion.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.