The growth and awareness of health and safety at work, 1780-1900

This thesis examines the growth and awareness of health and safety at work between 1780 and 1900. In this period the hazards at work were increased by the intensification of production brought about by the Industrial Revolution, and new risks to health arose from the wider range of toxic substances in use by manufacturing industry. There is discussion in the thesis of the extent to which the problems were identified in an age of short life expectancy and limited medical knowledge. The sources studied have been largely medical, governmental, trade and press reports. The emphasis is on the first effects seen and recommendations made, and where possible, the extent of the problem and the effectiveness of any preventative measures adopted and examined. There is discussion of the growing involvement of the Government in industrial health and safety. The subject is viewed in the light of modern thinking on industrial health but uses a classification appropriate to historical resources. Psychological and minor afflictions, neglected in the 19th century, are not considered. The available literature is reviewed in each section. Three detailed case studies conclude the thesis, two on the notoriously dangerous occupations of metal grinding and pottery, and one on occupational eye injuries. Each study is based on a different type of source material. The thesis overall shows that there was extensive concern for health and safety at work, but no systematic approach and only ad hoc implementation of preventative measures; and that the rate at which conditions improved varied between different industries and different categories of workers . However, some modern principles of health and safety at work can be seen emerging, and the period laid the necessary medical, technical and legal foundations for developments in the present century.

A study of the relationship between employee participation and safety performance within an industrial organisation

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Self-regulation of health and safety in a Local Authority with particular reference to safety representatives, supervisors and safety committees

The Report of the Robens Committee (1972), the Health and Safety at Work Act (1974) and the Safety Representatives and Safety Committees Regulations (1977) provide the framework within which this study of certain aspects of health and safety is carried out. The philosophy of self-regulation is considered and its development is set within an historical and an industrial relations perspective. The research uses a case study approach to examine the effectiveness of self-regulation in health and safety in a public sector organisation. Within this approach, methodological triangulation employs the techniques of interviews, questionnaires, observation and documentary analysis. The work is based in four departments of a Scottish Local Authority and particular attention is given to three of the main 'agents' of self-regulation - safety representatives, supervisors and safety committees and their interactions, strategies and effectiveness. A behavioural approach is taken in considering the attitudes, values, motives and interactions of safety representatives and management. Major internal and external factors, which interact and which influence the effectiveness of joint self-regulation of health and safety, are identified. It is emphasised that an organisation cannot be studied without consideration of the context within which it operates both locally and in the wider environment. One of these factors, organisational structure, is described as bureaucratic and the model of a Representative Bureaucracy described by Gouldner (1954) is compared with findings from the present study. An attempt is made to ascertain how closely the Local Authority fits Gouldner's model. This research contributes both to knowledge and to theory in the subject area by providing an in-depth study of self-regulation in a public sector organisation, which when compared with such studies as those of Beaumont (1980, 1981, 1982) highlights some of the differences between the public and private sectors. Both empirical data and hypothetical models are used to provide description and explanation of the operation of the health and safety system in the Local Authority. As data were collected during a dynamic period in economic, political and social terms, the research discusses some of the effects of the current economic recession upon safety organisation.

Local industrial systems and the location of FDI in Italy

This article investigates the determinants of foreign direct investment (FDI)location across Italian provinces. Specifically it examines the relationship between industry- specific local industrial systems and the location of inward FDI. This extends previous analysis beyond the mere density of activity, to illustrate the importance of the specific nature of agglomerations in attracting inward investment. The article develops a model of FDI location choice using a unique FDI database stratified by industry and province. The results also suggest that the importance of agglomeration differs between industries, and offers some explanation for this.

An expert system for the development of a health and safety policy/risk assessment in the plastics industry

Health and safety policies may be regarded as the cornerstone for positive prevention of occupational accidents and diseases. The Health and Safety at Work, etc Act 1974 makes it a legal duty for employers to prepare and revise a written statement of a general policy with respect to the health and safety at work of employees as well as the organisation and arrangements for carrying out that policy. Despite their importance and the legal equipment to prepare them, health and safety policies have been found, in a large number of plastics processing companies (particularly small companies), to be poorly prepared, inadequately implemented and monitored. An important cause of these inadequacies is the lack of necessary health and safety knowledge and expertise to prepare, implement and monitor policies. One possible way of remedying this problem is to investigate the feasibility of using computers to develop expert system programs to simulate the health and safety (HS) experts' task of preparing the policies and assisting companies implement and monitor them. Such programs use artificial intelligence (AI) techniques to solve this sort of problems which are heuristic in nature and require symbolic reasoning. Expert systems have been used successfully in a variety of fields such as medicine and engineering. An important phase in the feasibility of development of such systems is the engineering of knowledge which consists of identifying the knowledge required, eliciting, structuring and representing it in an appropriate computer programming language.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

The value of proprietary health and safety software to proactive health and safety management

There has been little research in health and safety management concernmg the application of information technology to the field. This thesis attempts to stimulate interest in this area by analysing the value of proprietary health and safety software to proactive health and safety management. The thesis is based upon the detailed software evaluation of seven pieces of proprietary health and safety software. It features a discussion concerning the development of information technology and health and safety management, a review of the key issues identified during the software evaluations, an analysis of the commercial market for this type of software, and a consideration of the broader issues which surround the use of this software. It also includes practical guidance for the evaluation, selection, implementation and maintenance of all health and safety management software. This includes a comprehensive software evaluation chart. The implications of the research are considered for proprietary health and safety software, the application of information technology to health and safety management, and for future research.

An evaluation of the effectiveness of intervention strategies for the promotion of health and safety performance in small firms

Recognition of the contribution of small firms to the UK economy has grown considerably since 1995 when this research first began. The poor record of small firms in managing health and safety effectively has caused concern, and efforts made to improve knowledge and awareness of the target group through various initiatives have had some success. This research thesis attempts to identify the range of intervention routes and methods available to reach the target group, and to consider ways of evaluating the outcome of such efforts. Various interventions were tested with small firms, including a Workshop; use of Questionnaires; short postal Reply Slip survey; leading to a closer evaluation of a specific industry- the Licensed Trade. Attitudes and beliefs of the sample were identified, and observations carried out to consider actions taken by workers and others in the workplace. These empirical research findings were used to develop the theme of Primary and Secondary interventions intended to change behaviours, and to confirm assumptions about what small firms currently do to manage health and safety risks. Guidance for small firms was developed as a Secondary intervention tool to support Primary interventions, such as inspection or insurance provision.

The interaction between the implementation of an occupational health and safety management system and safety culture:a case study in the rubber industry

A prominent theme emerging in Occupational Health and Safety (OSH) is the development of management systems. A range of interventions, according to a prescribed route detailed by one of the management systems, can be introduced into an organisation with some expectation of improved OSH performance. This thesis attempts to identify the key influencing factors that may impact upon the process of introducing interventions, (according to B88800: 1996, Guide to Implementing Occupational Health and Safety Management Systems) into an organisation. To help identify these influencing factors a review of possible models from the sphere of Total Quality Management (TQM) was undertaken and the most suitable TQM model selected for development and use in aSH. By anchoring the aSH model's development in the reviewed literature a range ofeare, medium and low level influencing factors were identified. This model was developed in conjunction with the research data generated within the case study organisation (rubber manufacturer) and applied to the organisation. The key finding was that the implementation of an OSH intervention was dependant upon three broad vectors of influence. These are the Incentive to introduce change within an organisation which refers to the drivers or motivators for OSH. Secondly the Ability within the management team to actually implement the changes refers to aspects, amongst others, such as leadership, commitment and perceptions of OSH. Ability is in turn itself influenced by the environment within which change is being introduced. TItis aspect of Receptivity refers to the history of the plant and characteristics of the workforce. Aspects within Receptivity include workforce profile and organisational policies amongst others. It was found that the TQM model selected and developed for an OSH management system intervention did explain the core influencing factors and their impact upon OSH performance. It was found that within the organisation the results that may have been expected from implementation of BS8800:1996 were not realised. The OSH model highlighted that given the organisation's starting point, a poor appreciation of the human factors of OSH, gave little reward for implementation of an OSH management system. In addition it was found that general organisational culture can effectively suffocate any attempts to generate a proactive safety culture.

The evaluation and development of the lead authority partnership scheme as a central intervention strategy for health and safety enforcement by local authorities

The research comprises a suite of studies that examines and develops the Lead Authority Partnership Scheme (LAPS) as a central intervention strategy for health and safety by local authority (LA) enforcers. Partnership working is a regulatory concept that in recent years has become more popular but there has been little research conducted to investigate, explore and evaluate its practical application. The study reviewed two contrasting approaches to partnership working between LAs and businesses, both of which were intended to secure improvements in the consistency of enforcement by the regulators and in the health and safety management systems of the participating businesses. The first was a well-established and highly prescriptive approach that required a substantial resource commitment on the part of the LA responsible for conducting a safety management review (SMR) of the business. As a result of his evaluation of the existing ‘full SMR’ scheme, the author developed a second, more flexible approach to partnership working. The research framework was based upon a primarily qualitative methodology intended to investigate and explore the impact of the new flexible arrangements for partnership working. The findings from this study of the flexible development of the scheme were compared and contrasted with those from studies of the established ‘full SMR’ scheme. A substantial degree of triangulation was applied in an attempt to strengthen validity and broaden applicability of the research findings. Key informant interviews, participant observation, document/archive reviews, questionnaires and surveys all their particular part to play in the overall study. The findings from this research revealed that LAPS failed to deliver consistency of LA enforcement across multiple-outlet businesses and the LA enforced business sectors. Improvement was however apparent in the safety management systems of the businesses participating in LAPS. Trust between LA inspector and safety professional was key to the success of the partnerships as was the commitment of these key individuals. Competition for precious LA resources, the priority afforded to food safety over health and safety, the perceived high resource demands of LAPS, and the structure and culture of LAs were identified as significant barriers to LA participation. Flexible approaches, whilst addressing the resource issues, introduced some fresh concerns relating to credibility and delivery. Over and above the stated aims of the scheme, LAs and businesses had their own reasons for participation, notably the personal development of individuals and kudos for the organisation. The research has explored the wider implications for partnership working with the overall conclusion it is most appropriately seen as a strategic level element within a broader structured intervention strategy.

The use of expert manpower in health and safety in France

The thesis examines the system of occupational health and safety in France. It analyses the use of expert manpower in the field with a view to establishing the possibility of a profession in health and safety. An input-output model is developed to bring together the necessary elements of prevention of accidents and occupational diseases. The role of institutions concerned with health and safety is analysed with reference to this model. The research establishes the need for a health and safety specialist role. The recognition and status of this role are found to be subject to other criteria including the acceptance by institutions of such a specialist role. The model is also used to define the role of this specialist as expected by the various institutions intervening in the field.

The effect of major roads upon the local economy:a study of industrial location and its effects

The economic effects of road building (beyond those accounted for in cost-benefit analysis) are not well understood. This thesis examines the issues surrounding those effects and attempts to clarify the relationship between road building and industrial location and to identify the effect on employment of that location. The literature reviewed leads to some doubt as to the efficacy of roads as an economic tool. A scries of interviews with representatives of business and property professionals in three areas adjacent to motorways is carried out. These covered the firms' location or relocation decisions, their production costs, transport needs and employment. The conclusions drawn echo the above statements based on reviewed literature: 1. There was a general lack of knowledge of transport within a firm despite subjects' very good understanding of the rest of the firms' operations. 2. The importance of major roads to the business location decision and its perceived importance to the operations of the firms was low. Property professionals sec roads as an effective marketing tool. 3. Firms have a tendency to shed labour upon relocation although this does not necessarily constitute a net loss of employment but a redistribution. Recommendations are made for further research.

Optical fibre sensors and their applications in the industrial weighing and aerospace industries

This thesis presents the design, fabrication and testing of novel grating based Optical Fibre Sensor (OFS) systems being interrogated using “off the shelf” interrogation systems, with the eventual development of marketable commercial systems at the forefront of the research. Both in the industrial weighing and aerospace industries, there has been a drive to investigate the feasibility of using optical fibre sensors being deployed where traditionally their electrical or mechanical counterparts would traditionally have been. Already, in the industrial weighing industry, commercial operators are deploying OFS-based Weigh-In-Motion (WIM) systems. Likewise, in the aerospace industry, OFS have been deployed to monitor such parameters as load history, impact detection, structural damage, overload detection, centre of gravity and the determination of blade shape. Based on the intrinsic properties of fibre Bragg gratings (FBGs) and Long Period Fibre Gratings (LPFGs), a number of novel OFS-based systems have been realised. Experimental work has shown that in the case of static industrial weighing, FBGs can be integrated with current commercial products and used to detect applied loads. The work has also shown that embedding FBGs in e-glass, to form a sensing patch, can result in said patches being bonded to rail track, forming the basis of an FBG-based WIM system. The results obtained have been sufficiently encouraging to the industrial partner that this work will be progressed beyond the scope of the work presented in this thesis. Likewise, and to the best of the author’s knowledge, a novel Bragg grating based systems for aircraft fuel parameter sensing has been presented. FBG-based pressure sensors have been shown to demonstrate good sensitivity, linearity and repeatability, whilst LPFG-based systems have demonstrated a far greater sensitivity when compared to FBGs, as well the advantage of being potentially able to detect causes of fuel adulteration based on their sensitivity to refractive index (RI). In the case of the LPFG-based system, considerable work remains to be done on the mechanical strengthening to improve its survivability in a live aircraft fuel tank environment. The FBG system has already been developed to an aerospace compliant prototype and is due to be tested at the fuel testing facility based at Airbus, Filton, UK. It is envisaged by the author that in both application areas, continued research in this area will lead to the eventual development of marketable commercial products.

The Evaluation of health and safety auditing systems

The specific objective of the research was to evaluate proprietary audit systems. Proprietary audit systems comprise question sets containing approximately 500 questions dealing with selected aspects of health and safety management. Each question is allotted a number of points and an organisation seeks to judge its health and safety performance by the overall score achieved in the audit. Initially it was considered that the evaluation method might involve comparing the proprietary audit scores with other methods of measuring safety performance. However, what appeared to be missing in the first instance was information that organisations could use to compare the contrast question set content against their own needs. A technique was developed using the computer database FileMaker Pro. This enables questions in an audit to be sorted into categories using a process of searching for key words. Questions that are not categorised by word searching can be identified and sorted manually. The process can be completed in 2-3 hours which is considerably faster than manual categorisation of questions which typically takes about 10 days. The technique was used to compare and contrast three proprietary audits: ISRS, CHASE and QSA. Differences and similarities between these audits were successfully identified. It was concluded that in general proprietary audits need to focus to a greater extent on identifying strengths and weaknesses in occupational health and safety management systems. To do this requires the inclusion of more probing questions which consider whether risk control measures are likely to be successful.