Specialist business skills of international students

This paper follows on from that presented at the last BEST conference in Edinburgh (Higson & Hamilton-Jones(2004)). At that stage, the authors outlined their initial research work with students studying on the yearlong International Foundation programmes. at three local FE Colleges allied to Aston University. The research (funded by the University's Teaching Quality Enhancement Funds (TQEF) involved questionnaires and interviews with staff and students (the latter all from overseas). it aimed to identify ways to improve the learning experience of students on the International Foundation programmes, to aid their smooth transition to full degree programmes in Business and Management and to improve the progression rates of such students while studying at Aston. The initial research findings were used to design a module for those students' progress to degree programmes in Aston Business School. This paper discusses how the module was designed, its content and the assessment methods used to help determine whether students are achieving the learning outcomes. The basic principle was to identify areas of study where the International Foundation Programme students needed help in order to improve their learning styles to assist them with the requirements of other modules that they would be studying during their time at Aston. Particular emphasis was put on the need to develop active learners who were not disadvantaged by their lack of awareness of UK culture and society and who were as comfortable performing written work under examination conditions or presenting orally as their UK counterparts. An additional aim was to prepare these students for the placement year which was a compulsory part of their degree. The module, therefore, comprises a range of inputs for a number of staff, a company visit, weekly reflective learning leading to Personal Development Plan (PDP) work, formal examinations, presentations, group work •and individual case studies. This paper also reports on the initial reaction of the students and tutors to the new learning experience with currently 30 participants undertaking the module. Provisional findings suggest that the International Foundation programme has prepared the students well for degree-level work and that as a group of international students they are much more analytical and, after studying the module interactive than their counterparts who have come directly onto Aston degrees. It has shown them still to be quite passive learners, comfortable with facts and lecture-style learning environments, but less comfortable when asked to use their own initiatives. Continuing progress needs to be made in terms of encouraging them to develop a reflective approach to learning with the students taking some time to feel comfortable with an analytical approach to learning. In addition, im account of the students' reactions to having to work through a formal (PDP) and the results of their first assessments will be provided. At Aston, this work is being used as a pilot to recognise good practice with regards to work with further groups of international students. it is hoped that this would have widespread application across the sector.

Modelling the E-business requirements of manufacturing organisations

This paper describes a model designed to recommend solutions to an organisation's e-business needs. It is designed to produce objective results based on perceived characteristics, unbiased by prejudice on the part of the person using the model. The model also includes a way of encapsulating the potential management concerns that may change for good or ill the likely relevance and probability of success of such solutions. The model has been tested on 13 case studies in small, medium and large organizations. © IFAC.

The role of market orientation in the business success of the MNC’s foreign subsidiaries

In recent discussions over the contribution of marketing to the strategy dialogue, market orientation has been singled out as being of particular importance in relation to the understanding of competitive advantage (Day et al 1992, Hunt and Lamb 2000). Research in the past has focused primarily on firms operating in domestic markets. As such, despite the recent progress, it is unclear of relevancy of market orientation as a construct in the context of multinational corporations (MNC) and their foreign subsidiaries. In this study, we set out to explore the role of market orientation in the subsidiary business performance. An investigation of a sample of 252 foreign subsidiaries in the UK revealed that except for “receptive? subsidiaries (Taggart 1998), market orientation has significant positive relationships with a number of business performance measures in all three other types of subsidiaries, suggesting that market orientation is a key driver for business performance at foreign subsidiaries.

The role of market orientation in the business success of MNCs' UK subsidiaries

Purpose - The paper aims to explore the role of market orientation in the multinational company's subsidiary's business performance. Design/methodology/approach - The paper is based on a questionnaire survey/analysis of a sample of 252 foreign subsidiaries in the UK. Findings - The paper finds that market orientation is a key driver for business performance at foreign subsidiaries. However, the strength of its impact on performance depends on the subsidiary role. Originality/value - This is the first systematic investigation of the role of market orientation in multinational companies' subsidiaries.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

A rule based model for the objective determination of the e-business requirements of a manufacturing organisation

The starting point of this research was the belief that manufacturing and similar industries need help with the concept of e-business, especially in assessing the relevance of possible e-business initiatives. The research hypotheses was that it should be possible to produce a systematic model that defines, at a useful level of detail, the probable e-business requirements of an organisation based on objective criteria with an accuracy of 85%-90%. This thesis describes the development and validation of such a model. A preliminary model was developed from a variety of sources, including a survey of current and planned e-business activity and representative examples of e-business material produced by e-business solution providers. The model was subject to a process of testing and refinement based on recursive case studies, with controls over the improving accuracy and stability of the model. Useful conclusions were also possible as to the relevance of e-business functions to the case study participants themselves. Techniques were evolved to synthesise the e-business requirements of an organisation and present them at a management summary level of detail. The results of applying these techniques to all the case studies used in this research were discussed. The conclusion of the research was that the case study methodology employed was successful. A model was achieved suitable for practical application in a manufacturing organisation requiring help with a requirements definition process.

Experiential learning:inspiring the business leaders of tomorrow

Purpose: The complex challenges of sustainable development and the need to embed these issues effectively into the education of future business leaders has never been more urgent. The purpose of this paper is to discuss different approaches taken by two UK signatories to the UN Principles for Responsible Management Education (PRME). Design/methodology/approach: The two approaches examined are: MSc Entrepreneurship students opting for placements with social enterprises; and MBA students undertaking workshops using "live" case studies. A content analysis of the experiences of students from their written reflective narratives is presented. This is supplemented by reflections of the facilitators and tutors. Findings: The analysis reveals that the opportunity to work with social entrepreneurs and/or "responsible" business professionals provides the business students with inspirational role models and positive social learning opportunities. Research limitations/implications: This paper suggests that experiential learning is an effective way of integrating ethics, responsibility and sustainability into the curriculum but the research draws on the experience of two schools. Further research is important to explore these findings in other contexts. Practical implications: The authors argue that direct exposure to a business culture (and/or behaviour) that is predicated upon ethical/social responsibility and sustainability is an effective means to embed these values in the curriculum. Originality/value: This paper contributes by drawing on social psychological research related to behaviour change to examine how experiential learning on traditional Business Masters programmes can provide students with the knowledge, motivation and skills to contribute positively to society, in a way that more traditional pedagogies cannot. © Emerald Group Publishing Limited.

Organising the business processes of a product servitised supply chain:a value perspective

This paper develops a structured method from the perspective of value to organise and optimise the business processes of a product servitised supply chain (PSSC). This method integrates the modelling tool of e3value with the associated value measurement, evaluation and analysis techniques. It enables visualisation, modelling and optimisation of the business processes of a PSSC. At the same time, the value co-creation and potential contribution to an organisation’s profitability can also be enhanced. The findings not only facilitate organisations that are attempting to adopt servitisation by helping avert any paradox, but also help a servitised organisation to identify the key business processes and clarify their influences to supply chain operations.

The role of government research establishments : a study of the concept of public patronage for applied research and development

This thesis follows the argument that, to fully understand the current position of national research laboratories in Great Britain one needs to study the historical development of the government research establishment as a specific social institution. A particular model is outlined in which it is argued that institutional characteristics evolve through the continual interplay between internal development and environmental factors within a changing political and economic context, and that the continuous development of an institution depends on its ability to adapt to changes in its operational environment. Within this framework important historical precedents for formal government institutional support for applied research are identified. and the transition from private to public patronage documented. The emergence and consolidation of government research laboratories in Britain is described in detail. The subsequent relative decline of public laboratories is interpreted in terms of the undermining of a traditional role resulting in legitimation crisis. It is concluded that it is no longer feasible to consider the public research laboratory as a coherent institutional form, and that the future of each individual laboratory can only be considered in relation to the institutional needs of its own sphere of operation. Nevertheless the laboratories have been forced into decline in an essentially unplanned way which may have serious consequences for the maintenance of the scientific and technical infrastructures, necessary for material progress in the national context.