Flow and pressure drop on the shellside of cylindrical heat exchangers

This work presents pressure distributions and fluid flow patterns on the shellside of a cylindrical shell-and-tube heat exchanger. The apparatus used was constructed from glass enabling direct observation of the flow using a dye release technique and had ten traversable pressure instrumented tubes permitting detailed pressure distributions to be obtained. The `exchanger' had a large tube bundle (278 tubes) and main flow areas typical of practical designs. Six geometries were studied: three baffle spacings both with and without baffle leakage. Results are also presented of three-dimensional modelling of shellside flows using the Harwell Laboratory's FLOW3D code. Flow visualisation provided flow patterns in the central plane of the bundle and adjacent to the shell wall. Comparison of these high-lighted significant radial flow variations. In particular, separated regions, originating from the baffle tips, were observed. The size of these regions was small in the bundle central plane but large adjacent to the shell wall and extended into the bypass lane. This appeared to reduce the bypass flow area and hence the bypass flow fraction. The three-dimensional flow modelling results were presented as velocity vector and isobar maps. The vector maps illustrated regions of high and low velocity which could be prone to tube vibration and fouling. Separated regions were also in evidence. A non-uniform crossflow was discovered with, in general, higher velocities in the central plane of the bundle than near the shell wall._The form of the isobar maps calculated by FLOW3D was in good agreement with experimental results. In particular, larger pressure drops occurred across the inlet than outlet of a crossflow region and were higher near the upstream than downstream baffle face. The effect of baffle spacing and baffle leakage on crossflow and window pressure drop measurements was identified. Agreement between the current measurements, previously obtained data and commonly used design correlations/models was, in general, poor. This was explained in terms of the increased understanding of shellside flow. The bulk of previous data, which dervies from small-scale rigs with few tubes, have been shown to be unrepresentative of typical commerical units. The Heat Transfer and Fluid Flow Service design program TASC provided the best predictions of the current pressure drop results. However, a number of simple one-dimensional models in TASC are, individually, questionable. Some revised models have been proposed.

Self-adaptive volunteered services composition through stimulus-and time-awareness

Volunteered Service Composition (VSC) refers to the process of composing volunteered services and resources. These services are typically published to a pool of voluntary resources. Selection and composition decisions tend to encounter numerous uncertainties: service consumers and applications have little control of these services and tend to be uncertain about their level of support for the desired functionalities and non-functionalities. In this paper, we contribute to a self-awareness framework that implements two levels of awareness, Stimulus-awareness and Time-awareness. The former responds to basic changes in the environment while the latter takes into consideration the historical performance of the services. We have used volunteer service computing as an example to demonstrate the benefits that self-awareness can introduce to self-adaptation. We have compared the Stimulus-and Time-awareness approaches with a recent Ranking approach from the literature. The results show that the Time-awareness level has the advantage of satisfying higher number of requests with lower time cost.

Proliferative diabetic retinopathy (R3) referrals from the digital diabetic retinopathy screening program:urgency of appointment in the hospital eye service achieved and needed?

DESIGN. Retrospective analysis PURPOSE. To assess the clinical characteristics and outcomes of patients identified with proliferative diabetic retinopathy (PDR) referred from the screening program to the hospital eye services (HES) METHODS. a retrospective analysis of urgently referred PDR cases to Birmingham Heartlands HES from august 2008 until July 2010 RESULTS. 130 urgent diabetic retinopathy referrals were made and reviewed. 103 (68% male, 80% type 2 diabetes) were referred for PDR with a mean age of 59 years, mean diabetes duration of 17.8years. 69% were on insulin treatment at the time of the screening, with mean HbA1c of 10.4% (range-5.7 to 16.5%). 65% of the patients were offered appointments at HES within two weeks after referral from the screening. 50.5% of the patients were seen in the HES within 2 weeks, 22 and 16 % were seen 2-4 and 4-8 weeks after referral respectively. 6 patients never attended ophthalmology examination during the two years of review. Of all the attendees, 56% were booked for pan retinal photocoagulation (PRP) & 9(9.3%) for macular laser respectively on their 1st HES visit. 75% of the patients were newly diagnosed PDR and 26 had previous PRP laser but lost to follow up. 63 patients ( 66%) received either PRP or macular laser treatment (85.7% of which is PRP). 63% of the PRP treatment was performed within a month of first HES attendance. Retinopathy grading discrepancy between the screening program and HES was noted in 20% (21 patients). CONCLUSIONS. This data suggests that the digital screening programme is appropriately identifying high risk patients with PDR with timely PRP laser treatment in the majority of patients but raises concern over patients lost to follow up (hence failsafe tracking of appointment attendance), and review of grading discrepancies between the ophthalmology and screening service.