Hand in hand:privatising five star hotels in Egypt through the stock market will enhance the latter's role as well as set an example of the benefits that could be gained from privatisation

This thesis examines the possibility of privatising public owned five star hotels in Egypt through its stock market in order to give a boost to the Egyptian privatisation programme and to help activate its stock market. To explore these aspects, two main technical exercises were executed. First the writer constructed, for the first time in Egypt, a daily price index for Cairo Stock Exchange and an index for the tourism sector, in order to analyze the efficiency of the capital market. This technical analysis showed that Cairo stock exchange is inefficient, stagnant and undergoes minimal fluctuations, especially when compared to other developed and emerging markets. Second, given the importance and complexity of the valuation of SOEs prior to their privatisation, a sample of three five star hotels that could be prime candidates for privatisation via the stock market in Egypt were selected and a detailed financial analysis for the three hotels was concluded. The result was a valuation range for the three hotels using various valuation methods. Nevertheless it was found out that the final value of hotels will be determined by the market itself. Depite the inefficiency of Cairo Stock Exchange, the thesis did not rule out privatisation through the stock market. On the contrary it cited several examples of developing countries that were able to successfully privatise some of their SOEs via their rudimentary capital markets. Finally, the thesis recommended that five star hotels could be pefect candidates for privatisation via the stock market in Egypt. This is because five star hotels are profitable, privately managed, non strategic and not highly capital intensive businesses. In addition, they do not suffer from overstaffing and the industry in which they operate i.e. tourism sector, has high growth prospects and is of an international nature. Therefore it is anticipated that privatisation of five star hotels can attract a lot of investors because of the relatively high returns. This in turn will help activate and popularize the capital market in Egypt. At the same time the benefits of privatisation would be more visible which will give more momentum to the privatisation programme and make it more politically acceptable.

Market orientation of hotels and travel services in China

China is unique both politically and economically. How this uniqueness impacts on firms'' adoption of market orientation and the impact of market orientation on business performance, however, remain unclear. This book reports a study by Dr Riliang Qu who aims to address the above knowledge void. The study employs a two-stage research strategy including interviews and a survey of 1000 hotels and travel services. The study found that government regulations restricting the firm rivalry and the shortage of competent managerial talents are among the most serious constraints to the firms'' development of market orientation along with such factors as inadequacy of government regulation on product quality and consumer protection. The findings suggest that in transitional like China, government actions could be a major force behind firms'' aspiration of being market-oriented. The study also found that the benefits of market orientation are multi-fold in that it not only improves company''s business performance but also has positive effects on customer satisfaction/retention, power in distribution channel, and corporate social responsibility.

The quantification of hazards at LPG installations

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

High-performance human resource practices, citizenship behaviour and organizational performance:A relational perspective

Taking a relational perspective on the employment relationship, we examined processes (mediation and moderation) linking high-performance human resource practices and productivity and turnover, two indicators of organizational performance. Multilevel analysis of data from hotels in the People's Republic of China revealed that service-oriented organizational citizenship behavior (OCB) partially mediated the relationships between high-performance human resource practices and both performance indicators. Unemployment rate moderated the service-oriented OCB-turnover relationship, and business strategy (service quality) moderated the service-oriented OCB-productivity relationship. Copyright of the Academy of Management, all rights reserved.

Does business environment matter to the development of a market orientation?

Developing a market orientation is one of the key issues in market-orientation research. In this study, based on a survey of top managers from 143 Chinese hotels and 72 travel services—two tourism sectors with distinctly different business environments—we explore the effects of environmental conditions on the development of market orientation. In particular we examine whether environmental conditions have a direct impact on the level of market orientation or whether they moderate the relationship between market orientation and its antecedents. We find that the effectiveness of top management emphasis varies under different environmental conditions but that the impact of other antecedents is not influenced by environmental conditions.

Corporate social responsibility in China:impact of regulations, market orientation and ownership structure

Purpose – This paper aims to report on a study that contributes to the understanding of the determinants of corporate social responsibility (CSR) in the largest emerging market, namely China. Design/methodology/approach – The approach is a survey of 600 hotels that resulted in 143 returned responses from top managers. Findings – Market orientation is the most significant predicator of CSR followed by government regulations. In contrast, ownership structure is found to have little effect. Originality/value – Previous research on CSR focuses on its nature and impact on business performance, and is carried out mainly in developed countries. This research contributes to one's understanding of the determinants of CSR in emerging markets like China. © 2007, Emerald Group Publishing Limited

Effects of government regulations, market orientation and ownership structure on corporate social responsibility in China:an empirical study

Previous research on corporate social responsibility mainly focuses on its nature and impact on business performance. This paper reports on a study that contributes to our understanding of the determinants of corporate social responsibility by focusing specifically on the role played by three strategically important variables, namely government regulation, ownership structure and market orientation. Results of a survey of 586 general managers of hotels in China suggest that the market orientation is the most significant predicator of corporate social responsibility followed by government regulation. In contrast, the ownership structure is found to have little effect. The implications of the findings for managers in China are discussed.

The impact of regulation and ownership structure on market orientation in the tourism industry in China

The nature of market orientation and its impact on business performance and other related outcomes have been extensively researched in a range of service contexts including tourism. In contrast, our understanding of the factors that influence market orientation is still limited. This paper reports on a study that contributes to our understanding of the determinants of market orientation within the tourism sector by focusing specifically on the role played by two strategically important variables, namely government regulation and ownership structure. The study analyses two national samples of hotels and travel services in the rapidly growing tourism industry in China. The hotel sector has been open to foreign investment for two decades and has a diversified ownership structure, whereas the travel services sector has been dominated by government owned firms and relatively closed to foreign investment. The results of the survey suggest that of the two new antecedents, only government regulation has a significant role to play in driving market orientation. Internally, access to appropriate managerial and marketing capabilities was identified as a significant predictor of the development of market orientation.

Determining consumer satisfaction and commitment through self-service technology and personal service usage

This paper expands research into self-service technology in the service encounter. Self-service technology is where customers deliver service themselves using some form of a technological interface. There is still a great deal unknown about self-service technology, in particular its impact on consumer satisfaction and consumer commitment. With that in mind, this empirical study explores the relative impact of self-service technology on consumer satisfaction and on a multidimensional measure of consumer commitment containing affective commitment, temporal commitment and instrumental commitment. The results reveal that in a hotel context personal service still remains very important for assessments of satisfaction, and affective and temporal commitment. What is particularly interesting is that self-service technology, while impacting these constructs, also impacts instrumental commitment. This suggests that positive evaluations of self-service technology may tie consumers into relationships with hotels. A discussion and implications for managers are provided on these and other results, and the paper is concluded with further potential research.

Biomass fuelled combined heat and power:situation in the UK and the Netherlands

Combined Heat and Power (CHP) is the simultaneous generation of usable heat and power in a single process. Despite its obvious advantages in terms of increased efficiency when compared to a single heat or power generation unit, there are a number of technical and economic reasons that have limited their selection. Biomass resources can be, and actually are used as fuel in CHP installations; however several hurdles have to be sorted beforehand, among the most important is the fact that biomass energy sources are not as energy intense as conventional CHP fuels. The ultimate outcome is a limited number of CHP units making use of biomass as fuel. Even fewer CHP units use bioliquids (e.g.: fast pyrolysis biomass liquids, biodiesel and vegetable oil). The Bioliquid-CHP project is carried out by a consortium of seven European and Russian complementary partners, funded by the EU and by the Federal Agency for Science and Innovation of the Russian Federation. The project aim is to develop microturbine and internal combustion engine adaptations in order to adjust these prime movers to bioliquids for CHP applications. This paper will show a summary of the current biomass CHP installations in the UK and the Netherlands, making reference to number of units, capacity, fuel used, the conversion technology involved and the preferred prime movers. The information will give an insight of the current market, with probable future trends and areas where growth could be expected. A similar paper describing the biomass CHP situation in Italy and Russia will be prepared in the near future.

The impacts of market orientation and corporate social responsibility on firm performance:evidence from China

Purpose – The purpose of this paper is to investigate the joint effects of market orientation (MO) and corporate social responsibility (CSR) on firm performance. Design/methodology/approach – Data were collected via a questionnaire survey of star-rated hotels in China and a total of 143 valid responses were received. The hypotheses were tested by employing structural equation modelling with a maximum likelihood estimation option. Findings – It was found that although both MO and CSR could enhance performance, once the effects of CSR are accounted for, the direct effects of MO on performance diminish considerably to almost non-existent. Although this result may be due to the fact that the research is conducted in China, a country where CSR might be crucially important to performance given the country's socialist legacy, it nonetheless provides strong evidence that MO's impact on organizational performance is mediated by CSR. Research limitations/implications – The main limitations include the use of cross-sectional data, the subjective measurement of performance and the uniqueness of the research setting (China). The findings provide an additional important insight into the processes by which a market oriented culture is transformed into superior organizational performance. Originality/value – This paper is one of the first to examine the joint effects of MO and CSR on business performance. The empirical evidence from China adds to the existing literature on the respective importance of MO and CSR.

A study of the effect of harmonics in the system on the performance of residual current-operated circuit-breakers and electromechanical overcurrent relays

Residual current-operated circuit-breakers (RCCBs) have proved useful devices for the protection of both human beings against ventricular fibrillation and installations against fire. Although they work well with sinusoidal waveforms, there is little published information on their characteristics. Due to shunt connected non-linear devices, not the least of which is the use of power electronic equipment, the supply is distorted. Consequently, RCCBs as well as other protection relays are subject to non-sinusoidal current waveforms. Recent studies showed that RCCBs are greatly affected by harmonics, however the reasons for this are not clear. A literature search has also shown that there are inconsistencies in the analysis of the effect of harmonics on protection relays. In this work, the way RCCBs operate is examined, then a model is built with the aim of assessing the effect of non-sinusoidal current on RCCBs. Tests are then carried out on a number of RCCBs and these, when compared with the results from the model showed good correlation. In addition, the model also enables us to explain the RCCBs characteristics for pure sinusoidal current. In the model developed, various parameters are evaluated but special attention is paid to the instantaneous value of the current and the tripping mechanism movement. A similar assessment method is then used to assess the effect of harmonics on two types of protection relay, the electromechanical instantaneous relay and time overcurrent relay. A model is built for each of them which is then simulated on the computer. Tests results compare well with the simulation results, and thus the model developed can be used to explain the relays behaviour in a harmonics environment. The author's models, analysis and tests show that RCCBs and protection relays are affected by harmonics in a way determined by the waveform and the relay constants. The method developed provides a useful tool and the basic methodology to analyse the behaviour of RCCBs and protection relays in a harmonics environment. These results have many implications, especially the way RCCBs and relays should be tested if harmonics are taken into account.

Setting parameters in MRP for the effective management of bought-out inventory in a JIT assembly environment

In recent years, UK industry has seen an explosive growth in the number of `Computer Aided Production Management' (CAPM) system installations. Of the many CAPM systems, materials requirement planning/manufacturing resource planning (MRP/MRPII) is the most widely implemented. Despite the huge investments in MRP systems, over 80 percent are said to have failed within 3 to 5 years of installation. Many people now assume that Just-In-Time (JIT) is the best manufacturing technique. However, those who have implemented JIT have found that it also has many problems. The author argues that the success of a manufacturing company will not be due to a system which complies with a single technique; but due to the integration of many techniques and the ability to make them complement each other in a specific manufacturing environment. This dissertation examines the potential for integrating MRP with JIT and Two-Bin systems to reduce operational costs involved in managing bought-out inventory. Within this framework it shows that controlling MRP is essential to facilitate the integrating process. The behaviour of MRP systems is dependent on the complex interactions between the numerous control parameters used. Methodologies/models are developed to set these parameters. The models are based on the Pareto principle. The idea is to use business targets to set a coherent set of parameters, which not only enables those business targets to be realised, but also facilitates JIT implementation. It illustrates this approach in the context of an actual manufacturing plant - IBM Havant. (IBM Havant is a high volume electronics assembly plant with the majority of the materials bought-out). The parameter setting models are applicable to control bought-out items in a wide range of industries and are not dependent on specific MRP software. The models have produced successful results in several companies and are now being developed as commercial products.

Fin spacing interaction in fluidized bed heat exchangers

The work presented in this thesis is concerned with the heat transfer performance of a single horizontal bare tube and a variety of finned tubes immersed in a shallow air fluidized bed. Results of experimental investigations with the bare tube indicate that the tube position in the bed influences its performance narticularly where fine bed materials are used. In some cases the maximum heat transfer is obtained with the tube in the particle cloud just above the dense phase fluidized bed - a phenomenon that has not been previously observed. This was attributed to the unusual particle circulation in shallow beds. The data is also presented in dimensionless correlations which may be useful for design purposes. A close approximation to the bare tube data can be obtained by using thetransient heating of a spherical robe and this provides a valuable way of accumulating a lot of data very rapidly. The experimental data on finned tubes shows that a fin spacing less than twenty times the average particle diameter can cause a significant reduction in heat transfer due to the interaction which takes place between the particles and the surface of the fins. Furthermore, evidence is provided to show that particle shape plays an important part in the interaction with spherical particles being superior to angular particles at low fin spacing/particle diameter ratio. The finned tube data is less sensitive to tube position in the bed than bare tubes and the best performance is when the tube is positioned at the distributor.A reduction in bed depth decreases the thermal performance of the finned tube but in many practical installations the reduction in pressure drop might more than comnensate for the reduced heat flux. Information is also provided on the theoretical uerformance of fins and the effect of the root contact area between the fins and the tube was investigated.

Cost models for engineering services

This thesis describes the procedure and results from four years research undertaken through the IHD (Interdisciplinary Higher Degrees) Scheme at Aston University in Birmingham, sponsored by the SERC (Science and Engineering Research Council) and Monk Dunstone Associates, Chartered Quantity Surveyors. A stochastic networking technique VERT (Venture Evaluation and Review Technique) was used to model the pre-tender costs of public health, heating ventilating, air-conditioning, fire protection, lifts and electrical installations within office developments. The model enabled the quantity surveyor to analyse, manipulate and explore complex scenarios which previously had defied ready mathematical analysis. The process involved the examination of historical material costs, labour factors and design performance data. Components and installation types were defined and formatted. Data was updated and adjusted using mechanical and electrical pre-tender cost indices and location, selection of contractor, contract sum, height and site condition factors. Ranges of cost, time and performance data were represented by probability density functions and defined by constant, uniform, normal and beta distributions. These variables and a network of the interrelationships between services components provided the framework for analysis. The VERT program, in this particular study, relied upon Monte Carlo simulation to model the uncertainties associated with pre-tender estimates of all possible installations. The computer generated output in the form of relative and cumulative frequency distributions of current element and total services costs, critical path analyses and details of statistical parameters. From this data alternative design solutions were compared, the degree of risk associated with estimates was determined, heuristics were tested and redeveloped, and cost significant items were isolated for closer examination. The resultant models successfully combined cost, time and performance factors and provided the quantity surveyor with an appreciation of the cost ranges associated with the various engineering services design options.