A methodology for the generation and evaluation of biorefinery process chains, in order to identify the most promising biorefineries for the EU

The topic of bioenergy, biofuels and bioproducts remains at the top of the current political and research agenda. Identification of the optimum processing routes for biomass, in terms of efficiency, cost, environment and socio-economics is vital as concern grows over the remaining fossil fuel resources, climate change and energy security. It is known that the only renewable way of producing conventional hydrocarbon fuels and organic chemicals is from biomass, but the problem remains of identifying the best product mix and the most efficient way of processing biomass to products. The aim is to move Europe towards a biobased economy and it is widely accepted that biorefineries are key to this development. A methodology was required for the generation and evaluation of biorefinery process chains for converting biomass into one or more valuable products that properly considers performance, cost, environment, socio-economics and other factors that influence the commercial viability of a process. In this thesis a methodology to achieve this objective is described. The completed methodology includes process chain generation, process modelling and subsequent analysis and comparison of results in order to evaluate alternative process routes. A modular structure was chosen to allow greater flexibility and allowing the user to generate a large number of different biorefinery configurations The significance of the approach is that the methodology is defined and is thus rigorous and consistent and may be readily re-examined if circumstances change. There was the requirement for consistency in structure and use, particularly for multiple analyses. It was important that analyses could be quickly and easily carried out to consider, for example, different scales, configurations and product portfolios and so that previous outcomes could be readily reconsidered. The result of the completed methodology is the identification of the most promising biorefinery chains from those considered as part of the European Biosynergy Project.

Metrics and models to support the development of hybrid information systems

The research described here concerns the development of metrics and models to support the development of hybrid (conventional/knowledge based) integrated systems. The thesis argues from the point that, although it is well known that estimating the cost, duration and quality of information systems is a difficult task, it is far from clear what sorts of tools and techniques would adequately support a project manager in the estimation of these properties. A literature review shows that metrics (measurements) and estimating tools have been developed for conventional systems since the 1960s while there has been very little research on metrics for knowledge based systems (KBSs). Furthermore, although there are a number of theoretical problems with many of the `classic' metrics developed for conventional systems, it also appears that the tools which such metrics can be used to develop are not widely used by project managers. A survey was carried out of large UK companies which confirmed this continuing state of affairs. Before any useful tools could be developed, therefore, it was important to find out why project managers were not using these tools already. By characterising those companies that use software cost estimating (SCE) tools against those which could but do not, it was possible to recognise the involvement of the client/customer in the process of estimation. Pursuing this point, a model of the early estimating and planning stages (the EEPS model) was developed to test exactly where estimating takes place. The EEPS model suggests that estimating could take place either before a fully-developed plan has been produced, or while this plan is being produced. If it were the former, then SCE tools would be particularly useful since there is very little other data available from which to produce an estimate. A second survey, however, indicated that project managers see estimating as being essentially the latter at which point project management tools are available to support the process. It would seem, therefore, that SCE tools are not being used because project management tools are being used instead. The issue here is not with the method of developing an estimating model or tool, but; in the way in which "an estimate" is intimately tied to an understanding of what tasks are being planned. Current SCE tools are perceived by project managers as targetting the wrong point of estimation, A model (called TABATHA) is then presented which describes how an estimating tool based on an analysis of tasks would thus fit into the planning stage. The issue of whether metrics can be usefully developed for hybrid systems (which also contain KBS components) is tested by extending a number of "classic" program size and structure metrics to a KBS language, Prolog. Measurements of lines of code, Halstead's operators/operands, McCabe's cyclomatic complexity, Henry & Kafura's data flow fan-in/out and post-release reported errors were taken for a set of 80 commercially-developed LPA Prolog programs: By re~defining the metric counts for Prolog it was found that estimates of program size and error-proneness comparable to the best conventional studies are possible. This suggests that metrics can be usefully applied to KBS languages, such as Prolog and thus, the development of metncs and models to support the development of hybrid information systems is both feasible and useful.

Using architecture models to support the generation and operation of component-based adaptive systems

Modelling architectural information is particularly important because of the acknowledged crucial role of software architecture in raising the level of abstraction during development. In the MDE area, the level of abstraction of models has frequently been related to low-level design concepts. However, model-driven techniques can be further exploited to model software artefacts that take into account the architecture of the system and its changes according to variations of the environment. In this paper, we propose model-driven techniques and dynamic variability as concepts useful for modelling the dynamic fluctuation of the environment and its impact on the architecture. Using the mappings from the models to implementation, generative techniques allow the (semi) automatic generation of artefacts making the process more efficient and promoting software reuse. The automatic generation of configurations and reconfigurations from models provides the basis for safer execution. The architectural perspective offered by the models shift focus away from implementation details to the whole view of the system and its runtime change promoting high-level analysis. © 2009 Springer Berlin Heidelberg.

Alliances to support the railway infrastructure of the United Kingdom:is the industry ready?

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Selecting the most preferable alternatives in a group decision making problem using DEA

Group decision making is the study of identifying and selecting alternatives based on the values and preferences of the decision maker. Making a decision implies that there are several alternative choices to be considered. This paper uses the concept of Data Envelopment Analysis to introduce a new mathematical method for selecting the best alternative in a group decision making environment. The introduced model is a multi-objective function which is converted into a multi-objective linear programming model from which the optimal solution is obtained. A numerical example shows how the new model can be applied to rank the alternatives or to choose a subset of the most promising alternatives.

Using simulation to assess the introduction of technology in a continuous operations process

Purpose – To investigate the role of simulation in the introduction of technology in a continuous operations process. Design/methodology/approach – A case-based research method was chosen with the aim to provide an exemplar of practice and test the proposition that the use of simulation can improve the implementation and running of conveyor systems in continuous process facilities. Findings – The research determines the optimum rate of re-introduction of inventory to a conveyor system generated during a breakdown event. Research limitations/implications – More case studies are required demonstrating the operational and strategic benefits that can be gained by using simulation to assess technology in organisations. Practical implications – A practical outcome of the study was the implementation of a policy for the manual re-introduction of inventory on a conveyor line after a breakdown event had occurred. Originality/value – The paper presents a novel example of the use of simulation to estimate the re-introduction rate of inventory after a breakdown event on a conveyor line. The paper highlights how by addressing this operational issue, ahead of implementation, the likelihood of the success of the strategic decision to acquire the technology can be improved.

A genetic algorithm to optimise the component placement process in the PCB assembly

In printed circuit board (PCB) assembly, the efficiency of the component placement process is dependent on two interrelated issues: the sequence of component placement, that is, the component sequencing problem, and the assignment of component types to feeders of the placement machine, that is, the feeder arrangement problem. In cases where some components with the same type are assigned to more than one feeder, the component retrieval problem should also be considered. Due to their inseparable relationship, a hybrid genetic algorithm is adopted to solve these three problems simultaneously for a type of PCB placement machines called the sequential pick-and-place (PAP) machine in this paper. The objective is to minimise the total distance travelled by the placement head for assembling all components on a PCB. Besides, the algorithm is compared with the methods proposed by other researchers in order to examine its effectiveness and efficiency.

A Delphi study to explore the adoption of servitization in UK companies

This paper explores and rationalises the process of servitization adoption across manufacturing firms. A Delphi research methodology has been applied to capture evidence and opinion from 33 senior executives, in 28 different sized organisations, from a cross section of British industry. The findings focus on five areas: (1) servitization and advanced services, (2) transformation: stimulus, drivers and organisational change, (3) impact on the customer and manufacturer, (4) enablers and inhibitors and (5) potential for business and the economy. Six findings are presented and collectively these contribute to our understanding of the broader change management processes that transform manufacturers to compete through advanced services.

Coping strategies against extreme weather events:a survey of SMEs in the UK

Small and Medium-scale Enterprises (SMEs); which generate more than one half of the employment and turnover, form an important sector of the UK economy. In fact, SMEs are considered as the backbone of the UK economy due to their significant economic and societal importance. Despite SMEs being the main drivers of the UK economy, they are also said to be the most vulnerable to the impacts from various disruptions such as Extreme Weather Events (EWEs). Consequently, increased intensity and frequency of weather extremes in the UK during the recent past has created a significant impact on the SME community. As the threat of EWEs is expected to further increase in future, the need for SMEs to implement effective coping mechanisms to manage the effects of EWEs is also increasing. This paper aims to identify and evaluate the current coping mechanisms implemented by SMEs to ensure their business continuity in the event of a weather extreme. The paper presents the findings of a questionnaire survey, conducted as part of "Community Resilience to Extreme Weather - CREW" research project, addressing this issue. It is identified that SMEs mostly rely on generic business continuity strategies as opposed to property level protection measures. The paper highlights the importance of raising the uptake of coping strategies by SMEs, as many were found without adequate coping strategies to deal with the risk of EWEs.

The use of the lichen genus Rhizocarpon in lichenometric dating with special reference to Holocene glacial events

Lichenometry is one of the most widely used methods of dating the surface age of substrata including rock surfaces, boulders, walls, and archaeological remains and has been particularly important in dating late Holocene glacial events. Yellow-green species of the crustose genus Rhizocarpon have been the most useful lichens in lichenometry because of their low growth rates and longevity. This review describes: (1) the biology of the genus Rhizocarpon, (2) growth rates and longevity, (3) environmental growth effects, (4) methods of estimating lichen age, (5) the methodology of lichenometry, (6) applications to dating glacial events, and (7) future research. Lichenometry depends on many assumptions, most critically that if the lag time before colonisation of a substratum is known and lichen age can be estimated, then a minimum surface age date can be obtained by measuring the size of the largest Rhizocarpon thallus. Lichen age can be estimated by calibrating thallus size against surfaces of known age (‘indirect lichenometry’), by constructing a growth rate-size curve from direct measurement of growth (‘direct lichenometry’), using radio-carbon (RC) dating, or from lichen ‘growth rings’. Future research should include a more rigorous investigation of the assumptions of lichenometry, especially whether the largest thallus present at a site is a good indicator of substratum age, and further studies on the establishment, development, growth, senescence, and mortality of Rhizocarpon lichens.

The Digital Observatory for Protected Areas (DOPA) Explorer 1.0

The Digital Observatory for Protected Areas (DOPA) has been developed to support the European Union’s efforts in strengthening our capacity to mobilize and use biodiversity data, information and forecasts so that they are readily accessible to policymakers, managers, experts and other users. Conceived as a set of web based services, DOPA provides a broad set of free and open source tools to assess, monitor and even forecast the state of and pressure on protected areas at local, regional and global scale. DOPA Explorer 1.0 is a web based interface available in four languages (EN, FR, ES, PT) providing simple means to explore the nearly 16,000 protected areas that are at least as large as 100 km2. Distinguishing between terrestrial, marine and mixed protected areas, DOPA Explorer 1.0 can help end users to identify those with most unique ecosystems and species, and assess the pressures they are exposed to because of human development. Recognized by the UN Convention on Biological Diversity (CBD) as a reference information system, DOPA Explorer is based on the best global data sets available and provides means to rank protected areas at the country and ecoregion levels. Inversely, DOPA Explorer indirectly highlights the protected areas for which information is incomplete. We finally invite the end-users of DOPA to engage with us through the proposed communication platforms to help improve our work to support the safeguarding of biodiversity.

Conceptualizing leadership perceptions as attitudes:using attitude theory to further the understanding of the relation between leadership and outcomes

Leadership is one of the most examined factors in relation to understanding employee wellbeing and performance. While there are disparate approaches to studying leadership, they share a common assumption that perceptions of a leader's behavior determine reactions to the leader. The concept of leadership perception is poorly understood in most theoretical approaches. To address this, we propose that there are many benefits from examining leadership perceptions as an attitude towards the leader. In this review, we show how research examining a number of aspects of attitudes (content, structure and function) can advance understanding of leadership perceptions and how these affect work-related outcomes. Such a perspective provides a more multi-faceted understanding of leadership perceptions than previously envisaged and this can provide a more detailed understanding of how such perceptions affect outcomes. In addition, we examine some of the main theoretical and methodological implications of viewing leadership perceptions as attitudes to the wider leadership area. The cross-fertilization of research from the attitudes literature to understanding leadership perceptions provides new insights into leadership processes and potential avenues for further research. (C) 2015 Elsevier Inc. All rights reserved

Using an in vitro human airway model to study the toxic effects of components of e-cigarettes

Cigarette smoke is a complex mixture of more than 4000 hazardous chemicals including the carcinogenic benzopyrenes. Nicotine, the most potent component of tobacco, is responsible for the addictive nature of cigarettes and is a major component of e-cigarette cartridges. Our study aims to investigate the toxicity of nicotine with special emphasis on the replacement of animals. Furthermore, we intend to study the effect of nicotine, cigarette smoke and e-cigarette vapours on human airways. In our current work, the BEAS 2B human bronchial epithelial cell line was used to analyse the effect of nicotine in isolation, on cell viability. Concentrations of nicotine from 1.1µM to 75µM were added to 5x105 cells per well in a 96 well plate and incubated for 24 hours. Cell titre blue results showed that all the nicotine treated cells were more metabolically active than the control wells (cells alone). These data indicate that, under these conditions, nicotine does not affect cell viability and in fact, suggests that there is a stimulatory effect of nicotine on metabolism. We are now furthering this finding by investigating the pro-inflammatory response of these cells to nicotine by measuring cytokine secretion via ELISA. Further work includes analysing nicotine exposure at different time points and on other epithelial cells lines like Calu-3.

Naturally occurring data as research instrument:analyzing examination responses to study the novice programmer

In New Zealand and Australia, the BRACElet project has been investigating students' acquisition of programming skills in introductory programming courses. The project has explored students' skills in basic syntax, tracing code, understanding code, and writing code, seeking to establish the relationships between these skills. This ITiCSE working group report presents the most recent step in the BRACElet project, which includes replication of earlier analysis using a far broader pool of naturally occurring data, refinement of the SOLO taxonomy in code-explaining questions, extension of the taxonomy to code-writing questions, extension of some earlier studies on students' 'doodling' while answering exam questions, and exploration of a further theoretical basis for work that until now has been primarily empirical.

The behaviour of antioxidants in polyolefins under conditions of U.V. exposure

The effects of antioxidants and stabilizers on the oxidative degradation of polyolefins (low density polyethylene [LDPE] and polypropylene [PPJ have been studied after subjecting to prior high temperature processing treatments. The changes in the both chemical and physical properties of unstabilized polymers occurring during processing were found to be strongly dependent on the amount of oxygen present in the mixer. Subsequent thermal and photo-oxidation showed very similar characteristics and the chromophore primarily responsible for:both thermo and photooxidative degradation of unstabilized polymers was found to be hydroperoxide formed during processing. Removal of hydroperoxide by heat treatment in an inert atmosphere although increasing ketonic carbonyl concentration, markedly decreased the rate of photo-oxidation, introducing an induction period similar to that of an unprocessed sample. It was concluded that hydroperoxides are the most important initiators in normally processed polymers during the early stages of photo-oxidation. Antioxidants such as metal dithiocarbamates which act by destroying peroxides into non-radica1 products were found to be efficient melt stabilizers for polyolefins and effective UV stabilizers during the initial photo-oxidation stage, whilst a phenolic antioxidant, n-octadecyl-3-(3',5'-di-terbutyl 4'hydroxypheny1) propionate (Irganox 1076) retarded photo-oxidation rate in the later stages. A typical 'UV absorber' 2-hydroxy-4-octyloxy-benzophenone (HOBP) has a minor thermal antioxidant action but retarded photo-oxidation at all stages. A substituated piperidine derivative, Bis [2.2.6.6-tetramethylpiperidlnyl-4] sebacate (Tinuvin 770) behaved as an pro-oxidant during thermal oxidation of polyolefins but was an effective stabilizer against UV light. The UV absorber, HOBP synergised effectively with both peroxide decomposing antioxidants (metal dithiocarbamates) and a chain-breaking antioxidant (Irganox 1076) during photo-oxidation of the poymers studed whereas the combined effect was additive during thermal oxidation. By contrast, the peroxide decornposers and chain-breaking antioxidant (Irganox 1076) which were effective synergists during thermal oxidation of LDPE· were antagonistic during photo-oxidation. The mechanisms of these processes are discussed.