The interface between Alzheimer's disease, normal aging, and related disorders

Since the earliest descriptions of Alzheimer's disease (AD), the presence of senile plaques (SP) and neurofibrillary tangles (NFT) have been regarded as the typical pathological hallmarks of the disease. Studies over the last twenty years, however, have reported a considerable degree of heterogeneity within the AD phenotype and as a consequence, an overlap between the pathological features of AD not only with normal aging, but also with disorders related to AD. This review discusses: 1) the degree of heterogeneity within AD, 2) the concept of an 'interface' between disorders, 3) the nature and degree of the interface between AD and normal aging, vascular dementia (VD), the tauopathies, synucleinopathies, and prion disease, and 4) whether the original status of AD should be retained or whether AD, normal aging, and the related disorders should be regarded as representing a 'continuum' of neuropathological change.

Medicines management across the primary-hospital healthcare interface: a study of paediatric patients

A comparison of medicines management documents in use by NHS organisations in the West Midlands confirms that there are important differences between the primary care and hospital sectors in respect to medicines management interface issues. Of these, two aspects important to paediatric patients have been studied. These are the transfer of information as a patient is admitted to hospital, and access to long-term medicines for home-patients. National guidance provided by NICE requires medication reconciliation to be undertaken on admission to hospital for adults. A study of paediatric admissions, reported in this thesis, demonstrates that the clinical importance of this process is at least as important for children as for adults, and challenges current UK guidance. The transfer of essential medication information on hospital admission is central to the medication reconciliation process. Two surveys of PCTs in 2007 and again in 2009 demonstrate that very few PCTs provide guidance to GPs to support this process. Provision of guidance is increasing slowly but remains the exception. The provision of long-term medicines for children at home is hindered by this patient population often needing unlicensed drugs. Further studies demonstrate that primary care processes regularly fail to maintain access to essential drugs and patients and their carers frequently turn to hospitals for help. Surveys of hospital medical staff (single site) and hospital nurses (six UK sites) demonstrates the activity these healthcare workers perform to help children get the medicines they need. A similar survey of why carers turn to a hospital pharmacy department for urgent supplies (usually termed rescue-medicines) adds to the understanding of these problems and supports identifying service changes. A large survey of community pharmacies demonstrates the difficulties they have when dispensing hospital prescriptions and identifies practical solutions. This programme concludes by recommending service changes to support medication management for children.

Interactions at the head-tape interface of a linear tape system

Many of the recent improvements in the capacity of data cartridge systems have been achieved through the use of narrower tracks, higher linear densities and continuous servo tracking with multi-channel heads. These changes have produced new tribological problems at the head/tape interface. It is crucial that the tribology of such systems is understood and this will continue since increasing storage capacities and faster transfer rates are constantly being sought. Chemical changes in the surface of single and dual layer MP tape have been correlated to signal performance. An accelerated tape tester, consisting of a custom made cycler ("loop tester"), was used to ascertain if results could be produced that were representative of a real tape drive system. A second set of experiments used a modified tape drive (Georgens cycler), which allowed the effects of the tape transport system on the tape surface to be studied. To isolate any effects on the tape surface due to the head/tape interface, read/write heads were not fitted to the cycler. Two further sets of experiments were conducted which included a head in the tape path. This allowed the effects of the head/tape interface on the physical and chemical properties of the head and tape surfaces to be investigated. It was during the final set of experiments that the effect on the head/tape interface, of an energised MR element, was investigated. The effect of operating each cycler at extreme relative humidity and temperature was investigated through the use of an environmental chamber. Extensive use was made of surface specific analytical techniques such as XPS, AFM, AES, and SEM to study the physical and chemical changes that occur at the head/tape interface. Results showed that cycling improved the signal performance of all the tapes tested. The data cartridge drive belt had an effect on the chemical properties of the tape surface on which it was in contact. Also binder degradation occurred for each tape and appeared to be greater at higher humidity. Lubricant was generally seen to migrate to the tape surface with cycling. Any surface changes likely to affect signal output occurred at the head surface rather than the tape.

Investigation and development of techniques for the characterisation of the synthetic/biological interface

The purpose of this study is to increase our knowledge of the nature of the surface properties of polymeric materials and improve our understanding of how these factors influence the deposition of proteins to form a reactive biological/synthetic interface. A number of surface analytical techniques were identified as being of potential benefit to this investigation and included in a multidisciplinary research program. Cell adhesion in culture was the primary biological sensor of surface properties, and it showed that the cell response to different materials can be modified by adhesion promoting protein layers: cell adhesion is a protein-mediated event. A range of surface rugosity can be produced on polystyrene, and the results presented here show that surface rugosity does not play a major role in determining a material's cell adhesiveness. Contact angle measurements showed that surface energy (specifically the polar fraction) is important in promoting cell spreading on surfaces. The immunogold labelling technique indicated that there were small, but noticeable differences, between the distribution of proteins on a range of surfaces. This study has shown that surface analysis techniques have different sensitivities in terms of detection limits and depth probed, and these are important in determining the usefulness of the information obtained. The techniques provide information on differing aspects of the biological/synthetic interface, and the consequence of this is that a range of techniques is needed in any full study of such a complex field as the biomaterials area.

Stereotypes of Taiwanese salespeople at the services interface

Stereotypes of salespeople are common currency in US media outlets and research suggests that these stereotypes are uniformly negative. However, there is no reason to expect that stereotypes will be consistent across cultures. The present paper provides the first empirical examination of salesperson stereotypes in an Asian country, specifically Taiwan. Using accepted psychological methods, Taiwanese salesperson stereotypes are found to be twofold, with a negative stereotype being quite congruent with existing US stereotypes, but also a positive stereotype, which may be related to the specific culture of Taiwan.

A unification-based natural language interface to a database.

An implementation of a Lexical Functional Grammar (LFG) natural language front-end to a database is presented, and its capabilities demonstrated by reference to a set of queries used in the Chat-80 system. The potential of LFG for such applications is explored. Other grammars previously used for this purpose are briefly reviewed and contrasted with LFG. The basic LFG formalism is fully described, both as to its syntax and semantics, and the deficiencies of the latter for database access application shown. Other current LFG implementations are reviewed and contrasted with the LFG implementation developed here specifically for database access. The implementation described here allows a natural language interface to a specific Prolog database to be produced from a set of grammar rule and lexical specifications in an LFG-like notation. In addition to this the interface system uses a simple database description to compile metadata about the database for later use in planning the execution of queries. Extensions to LFG's semantic component are shown to be necessary to produce a satisfactory functional analysis and semantic output for querying a database. A diverse set of natural language constructs are analysed using LFG and the derivation of Prolog queries from the F-structure output of LFG is illustrated. The functional description produced from LFG is proposed as sufficient for resolving many problems of quantification and attachment.

Accessing networked services : a user interface design problem

This research investigates the general user interface problems in using networked services. Some of the problems are: users have to recall machine names and procedures to. invoke networked services; interactions with some of the services are by means of menu-based interfaces which are quite cumbersome to use; inconsistencies exist between the interfaces for different services because they were developed independently. These problems have to be removed so that users can use the services effectively. A prototype system has been developed to help users interact with networked services. This consists of software which gives the user an easy and consistent interface with the various services. The prototype is based on a graphical user interface and it includes the following appJications: Bath Information & Data Services; electronic mail; file editor. The prototype incorporates an online help facility to assist users using the system. The prototype can be divided into two parts: the user interface part that manages interactlon with the user; the communicatIon part that enables the communication with networked services to take place. The implementation is carried out using an object-oriented approach where both the user interface part and communication part are objects. The essential characteristics of object-orientation, - abstraction, encapsulation, inheritance and polymorphism - can all contribute to the better design and implementation of the prototype. The Smalltalk Model-View-Controller (MVC) methodology has been the framework for the construction of the prototype user interface. The purpose of the development was to study the effectiveness of users interaction to networked services. Having completed the prototype, tests users were requested to use the system to evaluate its effectiveness. The evaluation of the prototype is based on observation, i.e. observing the way users use the system and the opinion rating given by the users. Recommendations to improve further the prototype are given based on the results of the evaluation. based on the results of the evah:1ation. . .'. " "', ':::' ,n,<~;'.'

Noise generated at the tyre/road interface

The work described in this thesis is directed towards the reduction of tyre/road interface noise and embodies a study of the factors involved in its generation. These factors comprise: (a) materials and construction of tyres and road surfaces (b) the spectral distribution of the noise. The importance of this work has become greater with reduction in engine noise. A review of the literature shows what has been achieved so far, and stresses the importance of maintaining other desirable tyre properties such as adhesion in wet conditions. The work has involved an analysis of mechanical factors in tyre construction and the behaviour of road surfaces. Measurements on noise have been carried out under practical conditions and also on replica surfaces in the laboratory, and in addition tests of wet road adhesion have been carried out with a variety of road surfaces. Consideration has been given to the psychological effects of the spectral distribution of noise. A major part of the work under-taken has been the development of a computer program, the results of which have made it possible to design a tyre tread block pattern to give an optimum spectral distribution. Sample tyres built to this design have been subjected to noise measurements and these have been shown to agree closely with the theoretical prediction and other properties of this tyre have proved to be satisfactory.

Microstructural analysis of surface and interface zones in concrete

Several of OPC paste and concrete specimens, with different mix proportions, were cast against CPF and impermeable formwork (IF) and the profiles of pore structure, microhardness and scratch hardness of the cover zone were established. The chloride ingress and the depth of carbonation of the surface zone of concrete cast against CPF and IF were investigated. The main mechanisms controlling the ECR processes and the factors affecting such treatment were critically reviewed. Subsequently, as a means of restoring passivation of steel embedded in carbonated concrete, such HCP specimens were subjected to ECR. The influence of ECR on the chemistry of the pore solution and the microstructure of the surface and the steel/cement past interface zones were also studied. The main findings of this investigation were as follows: (a) The thickness of the microstructure gradient of cover concrete is significantly decreased with increasing period of water curing but is relatively unaffected by curing temperature, w/e ratio and the use of cement replacement materials. (b) The scratch hardness technique was shown to be potentially useful for characterising the microstructure and microhardness gradients of the surface zone. (c) A relationship between the microstructure gradient and mass transport properties of the surface zone was established. (d) The use of CPF resulted in a significant reduction in porosity of both the cement paste matrix and the aggregate/cement paste transition zone, and a marked improvement in the resistance of the surface zone to carbonation and the ingress of chloride ions. (e) The ECR treatment resulted in a marked densification of the pore structure and in changes to the pore solution chemistry and the cement phases of near-surface and steel/cement paste transition zones. This effect was more pronounced with current density, period of treatment and particularly with the use of sodium phosphate as an electrolyte.

Translation as an ideological interface : English translations of Hitler's Mein Kampf

The present thesis is located within the framework of descriptive translation studies and critical discourse analysis. Modern translation studies have increasingly taken into account the complexities of power relations and ideological management involved in the production of translations. Paradoxically, persuasive political discourse has not been much touched upon, except for studies following functional (e.g. Schäffner 2002) or systemic-linguistic approaches (e.g. Calzada Pérez 2001). By taking 11 English translations of Hitler’s Mein Kampf as prime examples, the thesis aims to contribute to a better understanding of the translation of politically sensitive texts. Actors involved in political discourse are usually more concerned with the emotional appeal of their message than they are with its factual content. When such political discourse becomes the locus of translation, it may equally be crafted rhetorically, being used as a tool to persuade. It is thus the purpose of the thesis to describe subtle ‘persuasion strategies’ in institutionally translated political discourse. The subject of the analysis is an illustrative corpus of four full-text translations, two abridgements, and five extract translations of Mein Kampf. Methodologically, the thesis pursues a top-down approach. It begins by delineating sociocultural and situative-agentive conditions as causal factors impinging on the individual translations. Such interactive and interpersonal factors determined textual choices. The overall textual analysis consists of an interrelated corpus-driven and corpus-based approach. It demonstrates how corpus software can be fruitfully harnessed to discern ‘ideological significations’ in the translated texts. Altogether, the thesis investigates how translational decision-makers attempted to position the source text author and his narrative in line with overall rhetorical purposes.