A heat metering system for energy management on an industrial site

Faced with a future of rising energy costs there is a need for industry to manage energy more carefully in order to meet its economic objectives. A problem besetting the growth of energy conservation in the UK is that a large proportion of energy consumption is used in a low intensive manner in organisations where they would be responsibility for energy efficiency is spread over a large number of personnel who each see only small energy costs. In relation to this problem in the non-energy intensive industrial sector, an application of an energy management technique known as monitoring and targeting (M & T) has been installed at the Whetstone site of the General Electric Company Limited in an attempt to prove it as a means for motivating line management and personnel to save energy. The objective energy saving for which the M & T was devised is very specific. During early energy conservation work at the site there had been a change from continuous to intermittent heating but the maintenance of the strategy was receiving a poor level of commitment from line management and performance was some 5% - 10% less than expected. The M & T is concerned therefore with heat for space heating for which a heat metering system was required. Metering of the site high pressure hot water system posed technical difficulties and expenditure was also limited. This led to a ‘tin-house' design being installed for a price less than the commercial equivalent. The timespan of work to achieve an operational heat metering system was 3 years which meant that energy saving results from the scheme were not observed during the study. If successful the replication potential is the larger non energy intensive sites from which some 30 PT savings could be expected in the UK.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Purchasing green transport and logistics services:implications for small business

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational and financial resources that often result in failure to adopt an environmental perspective. In the extant literature, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. However, little has been written in relation to purchasing green transport and logistics services. The aim of this paper is to explore practices in the buying of green transport and logistics services and to derive implications for small buyer companies. The paper analyses how general environmental company ambitions and environmental purchasing practices are reflected when green transport and logistics services are purchased in three different European countries (Italy, Ireland and Sweden) using a multiple case study research approach. The results of the paper indicate that while the case companies show a relatively high concern for green issues at corporate level, a lower importance is attributed to green issues at the purchasing function level. When green concerns in the purchasing of transport and logistics services are analysed the level of importance decreases further. Thus, a conflicting attitude is evident between the overall corporate level and the purchasing of transport and logistics services specifically. This suggests that there is potential for improvement especially in the area of green collaboration in buyer and supplier relationships.

Fast response static var generator for improving the power system performance of an electric arc furnace (EAF)

Cascaded multilevel inverters-based Static Var Generators (SVGs) are FACTS equipment introduced for active and reactive power flow control. They eliminate the need for zigzag transformers and give a fast response. However, with regard to their application for flicker reduction in using Electric Arc Furnace (EAF), the existing multilevel inverter-based SVGs suffer from the following disadvantages. (1) To control the reactive power, an off-line calculation of Modulation Index (MI) is required to adjust the SVG output voltage. This slows down the transient response to the changes of reactive power; and (2) Random active power exchange may cause unbalance to the voltage of the d.c. link (HBI) capacitor when the reactive power control is done by adjusting the power angle d alone. To resolve these problems, a mathematical model of 11-level cascaded SVG, was developed. A new control strategy involving both MI (modulation index) and power angle (d) is proposed. A selected harmonics elimination method (SHEM) is taken for switching pattern calculations. To shorten the response time and simplify the controls system, feed forward neural networks are used for on-line computation of the switching patterns instead of using look-up tables. The proposed controller updates the MI and switching patterns once each line-cycle according to the sampled reactive power Qs. Meanwhile, the remainder reactive power (compensated by the MI) and the reactive power variations during the line-cycle will be continuously compensated by adjusting the power angles, d. The scheme senses both variables MI and d, and takes action through the inverter switching angle, qi. As a result, the proposed SVG is expected to give a faster and more accurate response than present designs allow. In support of the proposal there is a mathematical model for reactive powered distribution and a sensitivity matrix for voltage regulation assessment, MATLAB simulation results are provided to validate the proposed schemes. The performance with non-linear time varying loads is analysed and refers to a general review of flicker, of methods for measuring flickers due to arc furnace and means for mitigation.

Stakeholder performance measurement:general approaches and methods of economic evaluation

This paper begins by suggesting that when considering Corporate Social Responsibility (CSR), even CSR as justified in terms of the business case, stakeholders are of great importance to corporations. In the UK the Company Law Review (DTI, 2002) has suggested that it is appropriate for UK companies to be managed upon the basis of an enlightened shareholder approach. Within this approach the importance of stakeholders, other than shareholders, is recognised as being instrumental in succeeding in providing shareholder value. Given the importance of these other stakeholders it is then important that corporate management measure and manage stakeholder performance. In order to do this there are two general approaches that could be adopted and these are the use of monetary values to reflect stakeholder value or cost and non-monetary values. In order to consider these approaches further this paper considered the possible use of these approaches for two stakeholder groups: namely employees and the environment. It concludes that there are ethical and practical difficulties with calculating economic values for stakeholder resources and so prefers a multi-dimensional approach to stakeholder performance measurement that does not use economic valuation.

The prediction of vibration in large electric machines

This thesis reports the development of a reliable method for the prediction of response to electromagnetically induced vibration in large electric machines. The machines of primary interest are DC ship-propulsion motors but much of the work reported has broader significance. The investigation has involved work in five principal areas. (1) The development and use of dynamic substructuring methods. (2) The development of special elements to represent individual machine components. (3) Laboratory scale investigations to establish empirical values for properties which affect machine vibration levels. (4) Experiments on machines on the factory test-bed to provide data for correlation with prediction. (5) Reasoning with regard to the effect of various design features. The limiting factor in producing good models for machines in vibration is the time required for an analysis to take place. Dynamic substructuring methods were adopted early in the project to maximise the efficiency of the analysis. A review of existing substructure- representation and composite-structure assembly methods includes comments on which are most suitable for this application. In three appendices to the main volume methods are presented which were developed by the author to accelerate analyses. Despite significant advances in this area, the limiting factor in machine analyses is still time. The representation of individual machine components was addressed as another means by which the time required for an analysis could be reduced. This has resulted in the development of special elements which are more efficient than their finite-element counterparts. The laboratory scale experiments reported were undertaken to establish empirical values for the properties of three distinct features - lamination stacks, bolted-flange joints in rings and cylinders and the shimmed pole-yoke joint. These are central to the preparation of an accurate machine model. The theoretical methods are tested numerically and correlated with tests on two machines (running and static). A system has been devised with which the general electromagnetic forcing may be split into its most fundamental components. This is used to draw some conclusions about the probable effects of various design features.

A class of perfect fluids in general relativity

This thesis is concerned with exact solutions of Einstein's field equations of general relativity, in particular, when the source of the gravitational field is a perfect fluid with a purely electric Weyl tensor. General relativity, cosmology and computer algebra are discussed briefly. A mathematical introduction to Riemannian geometry and the tetrad formalism is then given. This is followed by a review of some previous results and known solutions concerning purely electric perfect fluids. In addition, some orthonormal and null tetrad equations of the Ricci and Bianchi identities are displayed in a form suitable for investigating these space-times. Conformally flat perfect fluids are characterised by the vanishing of the Weyl tensor and form a sub-class of the purely electric fields in which all solutions are known (Stephani 1967). The number of Killing vectors in these space-times is investigated and results presented for the non-expanding space-times. The existence of stationary fields that may also admit 0, 1 or 3 spacelike Killing vectors is demonstrated. Shear-free fluids in the class under consideration are shown to be either non-expanding or irrotational (Collins 1984) using both orthonormal and null tetrads. A discrepancy between Collins (1984) and Wolf (1986) is resolved by explicitly solving the field equations to prove that the only purely electric, shear-free, geodesic but rotating perfect fluid is the Godel (1949) solution. The irrotational fluids with shear are then studied and solutions due to Szafron (1977) and Allnutt (1982) are characterised. The metric is simplified in several cases where new solutions may be found. The geodesic space-times in this class and all Bianchi type 1 perfect fluid metrics are shown to have a metric expressible in a diagonal form. The position of spherically symmetric and Bianchi type 1 space-times in relation to the general case is also illustrated.

Improvements to the arc-spraying process

After a brief review of the various forms of thermal spraying equipment and processes, descriptions of the basic principles involved and the general functions for which thermally sprayed coatings are used are given. The background of the collaborating company, Metallisation, is described and their position in the overall market discussed, providing a backdrop against which the appropriateness of various project options might be judged. Current arc-spraying equipment is then examined, firstly in terms of the workings of their constituent parts and subsequently by examining the effects of changes in design and in operating parameters both upon equipment operation and the coatings produced. Published literature relating to these matters is reviewed. Literature relating to the production, comminution and propulsion of the particles which form the spray is discussed as are the mechanisms involved at impact with the substrate. Literature on the use of rockets for thermal spraying and induction heating as a process for feedstock melting are also reviewed. Three distinct options for further study are derived and preliminary tests and costings made to allow one option alone, the use of rocket acceleration, to go forward to the experimental phase. A suitable rocket burner was developed, tested and incorporated into an arc-spray system so that the sprayability of the whole could be assessed. Coatings were made using various parameters and these are compared with coatings produced by a standard system. Coatings were examined for macro and micro hardness, cohesive strength, porosity and by microstructural examination. The results indicate a high degree of similarity between the coatings produced by the standard system and the high velocity system. This was surprising in view of the very different atomising media and velocities. Possible causes for this similarity and the general behaviour of this new system and the standard system are discussed before the study reaches its conclusions in not proving the hypothesis that an increase in particle velocity would improve the mechanical properties of arc-sprayed steel coatings. KEY WORDS: Sprayed metal coatings, Electric arc spraying, High velocity flame spraying, Sprayed coating properties

Une étude générique du metteur en scène au théâtre:son émergence et son rôle moderne et contemporain

The theatre director (metteur en scene in French) is a relatively new figure in theatre practice. It was not until the I820s that the term 'mise en scene' gained currency. The term 'director' was not in general use until the I880s. The emergence and the role of the director has been considered from a variety of perspectives, either through the history of theatre (Allevy, Jomaron, Sarrazac, Viala, Biet and Triau); the history of directing (Chinoy and Cole, Boll, Veinstein, Roubine); semiotic approaches to directing (Whitmore, Miller, Pavis); the semiotics of performance (De Marinis); generic approaches to the mise en scene (Thomasseau, Banu); post-dramatic approaches to theatre (Lehmann); approaches to performance process and the specifics of rehearsal methodology (Bradby and Williams, Giannachi and Luckhurst, Picon-Vallin, Styan). What the scholarly literature has not done so far is to map the parameters necessarily involved in the directing process, and to incorporate an analysis of the emergence of the theatre director during the modem period and consider its impact on contemporary performance practice. Directing relates primarily to the making of the performance guided by a director, a single figure charged with the authority to make binding artistic decisions. Each director may have her/his own personal approaches to the process of preparation prior to a show. This is exemplified, for example, by the variety of terms now used to describe the role and function of directing, from producer, to facilitator or outside eye. However, it is essential at the outset to make two observations, each of which contributes to a justification for a generic analysis (as opposed to a genetic approach). Firstly, a director does not work alone, and cooperation with others is involved at all stages of the process. Secondly, beyond individual variation, the role of the director remains twofold. The first is to guide the actors (meneur de jeu, directeur d'acteurs, coach); the second is to make a visual representation in the performance space (set designer, stage designer, costume designer, lighting designer, scenographe). The increasing place of scenography has brought contemporary theatre directors such as Wilson, Castellucci, Fabre to produce performances where the performance space becomes a semiotic dimension that displaces the primacy of the text. The play is not, therefore, the sole artistic vehicle for directing. This definition of directing obviously calls for a definition of what the making of the performance might be. The thesis defines the making of the performance as the activity of bringing a social event, by at least one performer, providing visual and/or textual meaning in a performance space. This definition enables us to evaluate four consistent parameters throughout theatre history: first, the social aspect associated to the performance event; second, the devising process which may be based on visual and/or textual elements; third, the presence of at least one performer in the show; fourth, the performance space (which is not simply related to the theatre stage). Although the thesis focuses primarily on theatre practice, such definition blurs the boundaries between theatre and other collaborative artistic disciplines (cinema, opera, music and dance). These parameters illustrate the possibility to undertake a generic analysis of directing, and resonate with the historical, political and artistic dimensions considered. Such a generic perspective on the role of the director addresses three significant questions: an historical question: how/why has the director emerged?; a sociopolitical question: how/why was the director a catalyst for the politicisation of theatre, and subsequently contributed to the rise of State-funded theatre policy?; and an artistic one: how/why the director has changed theatre practice and theory in the twentieth-century? Directing for the theatre as an artistic activity is a historically situated phenomenon. It would seem only natural from a contemporary perspective to associate the activity of directing to the function of the director. This is relativised, however, by the question of how the performance was produced before the modern period. The thesis demonstrates that the rise of the director is a progressive and historical phenomenon (Dort) rather than a mere invention (Viala, Sarrazac). A chronological analysis of the making of the performance throughout theatre history is the most useful way to open the study. In order to understand the emergence of the director, the research methodology assesses the interconnection of the four parameters above throughout four main periods of theatre history: the beginning of the Renaissance (meneur de jeu), the classical age (actor-manager and stage designer-manager), the modern period (director) and the contemporary period (director-facilitator, performer). This allows us properly to appraise the progressive emergence of the director, as well as to make an analysis of her/his modern and contemporary role. The first chapter argues that the physical separation between the performance space and its audience, which appeared in the early fifteenth-century, has been a crucial feature in the scenographic, aesthetic, political and social organisation of the performance. At the end of the Middle Ages, French farces which raised socio-political issues (see Bakhtin) made a clear division on a single outdoor stage (treteau) between the actors and the spectators, while religious plays (drame fiturgique, mystere) were mostly performed on various outdoor and opened multispaces. As long as the performance was liturgical or religious, and therefore confined within an acceptable framework, it was allowed. At the time, the French ecclesiastical and civil authorities tried, on several occasions, to prohibit staged performances. As a result, practitioners developed non-official indoor spaces, the Theatre de fa Trinite (1398) being the first French indoor theatre recognized by scholars. This self-exclusion from the open public space involved breaking the accepted rules by practitioners (e.g. Les Confreres de fa Passion), in terms of themes but also through individual input into a secular performance rather than the repetition of commonly known religious canvases. These developments heralded the authorised theatres that began to emerge from the mid-sixteenth century, which in some cases were subsidised in their construction. The construction of authorised indoor theatres associated with the development of printing led to a considerable increase in the production of dramatic texts for the stage. Profoundly affecting the reception of the dramatic text by the audience, the distance between the stage and the auditorium accompanied the changing relationship between practitioners and spectators. This distance gave rise to a major development of the role of the actor and of the stage designer. The second chapter looks at the significance of both the actor and set designer in the devising process of the performance from the sixteenth-century to the end of the nineteenth-century. The actor underwent an important shift in function in this period from the delivery of an unwritten text that is learned in the medieval oral tradition to a structured improvisation produced by the commedia dell 'arte. In this new form of theatre, a chef de troupe or an experienced actor shaped the story, but the text existed only through the improvisation of the actors. The preparation of those performances was, moreover, centred on acting technique and the individual skills of the actor. From this point, there is clear evidence that acting began to be the subject of a number of studies in the mid-sixteenth-century, and more significantly in the seventeenth-century, in Italy and France. This is revealed through the implementation of a system of notes written by the playwright to the actors (stage directions) in a range of plays (Gerard de Vivier, Comedie de la Fidelite Nuptiale, 1577). The thesis also focuses on Leoni de' Sommi (Quatro dialoghi, 1556 or 1565) who wrote about actors' techniques and introduced the meneur de jeu in Italy. The actor-manager (meneur de jeu), a professional actor, who scholars have compared to the director (see Strihan), trained the actors. Nothing, however, indicates that the actor-manager was directing the visual representation of the text in the performance space. From the end of the sixteenth-century, the dramatic text began to dominate the process of the performance and led to an expansion of acting techniques, such as the declamation. Stage designers carne from outside the theatre tradition and played a decisive role in the staging of religious celebrations (e.g. Actes des Apotres, 1536). In the sixteenth-century, both the proscenium arch and the borders, incorporated in the architecture of the new indoor theatres (theatre a l'italienne), contributed to create all kinds of illusions on the stage, principally the revival of perspective. This chapter shows ongoing audience demands for more elaborate visual effects on the stage. This led, throughout the classical age, and even more so during the eighteenth-century, to grant the stage design practitioner a major role in the making of the performance (see Ciceri). The second chapter demonstrates that the guidance of the actors and the scenographic conception, which are the artistic components of the role of the director, appear to have developed independently from one another until the nineteenth-century. The third chapter investigates the emergence of the director per se. The causes for this have been considered by a number of scholars, who have mainly identified two: the influence of Naturalism (illustrated by the Meiningen Company, Antoine, and Stanislavski) and the invention of electric lighting. The influence of the Naturalist movement on the emergence of the modem director in the late nineteenth-century is often considered as a radical factor in the history of theatre practice. Naturalism undoubtedly contributed to changes in staging, costume and lighting design, and to a more rigorous commitment to the harmonisation and visualisation of the overall production of the play. Although the art of theatre was dependent on the dramatic text, scholars (Osborne) demonstrate that the Naturalist directors did not strictly follow the playwright's indications written in the play in the late nineteenth-century. On the other hand, the main characteristic of directing in Naturalism at that time depended on a comprehensive understanding of the scenography, which had to respond to the requirements of verisimilitude. Electric lighting contributed to this by allowing for the construction of a visual narrative on stage. However, it was a master technician, rather than an emergent director, who was responsible for key operational decisions over how to use this emerging technology in venues such as the new Bayreuth theatre in 1876. Electric lighting reflects a normal technological evolution and cannot be considered as one of the main causes of the emergence of the director. Two further causes of the emergence of the director, not considered in previous studies, are the invention of cinema and the Symbolist movement (Lugne-Poe, Meyerhold). Cinema had an important technological influence on the practitioners of the Naturalist movement. In order to achieve a photographic truth on the stage (tableau, image), Naturalist directors strove to decorate the stage with the detailed elements that would be expected to be found if the situation were happening in reality. Film production had an influence on the work of actors (Walter). The filmmaker took over a primary role in the making of the film, as the source of the script, the filming process and the editing of the film. This role influenced the conception that theatre directors had of their own work. It is this concept of the director which influenced the development of the theatre director. As for the Symbolist movement, the director's approach was to dematerialise the text of the playwright, trying to expose the spirit, movement, colour and rhythm of the text. Therefore, the Symbolists disengaged themselves from the material aspect of the production, and contributed to give greater artistic autonomy to the role of the director. Although the emergence of the director finds its roots amongst the Naturalist practitioners (through a rigorous attempt to provide a strict visual interpretation of the text on stage), the Symbolist director heralded the modem perspective of the making of performance. The emergence of the director significantly changed theatre practice and theory. For instance, the rehearsal period became a clear work in progress, a platform for both developing practitioners' techniques and staging the show. This chapter explores and contrasts several practitioners' methods based on the two aspects proposed for the definition of the director (guidance of the actors and materialisation of a visual space). The fourth chapter argues that the role of the director became stronger, more prominent, and more hierarchical, through a more political and didactic approach to theatre as exemplified by the cases of France and Germany at the end of the nineteenth-century and through the First World War. This didactic perspective to theatre defines the notion of political theatre. Political theatre is often approached by the literature (Esslin, Willett) through a Marxist interpretation of the great German directors' productions (Reinhardt, Piscator, Brecht). These directors certainly had a great influence on many directors after the Second World War, such as Jean Vilar, Judith Molina, Jean-Louis Barrault, Roger Planchon, Augusto Boal, and others. This chapter demonstrates, moreover, that the director was confirmed through both ontological and educational approaches to the process of making the performance, and consequently became a central and paternal figure in the organisational and structural processes practiced within her/his theatre company. In this way, the stance taken by the director influenced the State authorities in establishing theatrical policy. This is an entirely novel scholarly contribution to the study of the director. The German and French States were not indifferent to the development of political theatre. A network of public theatres was thus developed in the inter-war period, and more significantly after the Second World War. The fifth chapter shows how State theatre policies establish its sources in the development of political theatre, and more specifically in the German theatre trade union movement (Volksbiihne) and the great directors at the end of the nineteenth-century. French political theatre was more influenced by playwrights and actors (Romain Rolland, Louise Michel, Louis Lumet, Emile Berny). French theatre policy was based primarily on theatre directors who decentralised their activities in France during both the inter-war period and the German occupation. After the Second World War, the government established, through directors, a strong network of public theatres. Directors became both the artistic director and the executive director of those institutionalised theatres. The institution was, however, seriously shaken by the social and political upheaval of 1968. It is the link between the State and the institution in which established directors were entangled that was challenged by the young emerging directors who rejected institutionalised responsibility in favour of the autonomy of the artist in the 1960s. This process is elucidated in chapter five. The final chapter defines the contemporary role of the director in contrasting thework of a number of significant young theatre practitioners in the 1960s such as Peter Brook, Ariane Mnouchkine, The Living Theater, Jerzy Grotowski, Augusto Boal, Eugenio Barba, all of whom decided early on to detach their companies from any form of public funding. This chapter also demonstrates how they promoted new forms of performance such as the performance of the self. First, these practitioners explored new performance spaces outside the traditional theatre building. Producing performances in a non-dedicated theatre place (warehouse, street, etc.) was a more frequent practice in the 1960s than before. However, the recent development of cybertheatre questions both the separation of the audience and the practitioners and the place of the director's role since the 1990s. Secondly, the role of the director has been multifaceted since the 1960s. On the one hand, those directors, despite all their different working methods, explored western and non-western acting techniques based on both personal input and collective creation. They challenged theatrical conventions of both the character and the process of making the performance. On the other hand, recent observations and studies distinguish the two main functions of the director, the acting coach and the scenographe, both having found new developments in cinema, television, and in various others events. Thirdly, the contemporary director challenges the performance of the text. In this sense, Antonin Artaud was a visionary. His theatre illustrates the need for the consideration of the totality of the text, as well as that of theatrical production. By contrasting the theories of Artaud, based on a non-dramatic form of theatre, with one of his plays (Le Jet de Sang), this chapter demonstrates how Artaud examined the process of making the performance as a performance. Live art and autobiographical performance, both taken as directing the se(f, reinforce this suggestion. Finally, since the 1990s, autobiographical performance or the performance of the self is a growing practical and theoretical perspective in both performance studies and psychology-related studies. This relates to the premise that each individual is making a representation (through memory, interpretation, etc.) of her/his own life (performativity). This last section explores the links between the place of the director in contemporary theatre and performers in autobiographical practices. The role of the traditional actor is challenged through non-identification of the character in the play, while performers (such as Chris Burden, Ron Athey, Orlan, Franko B, Sterlac) have, likewise, explored their own story/life as a performance. The thesis demonstrates the validity of the four parameters (performer, performance space, devising process, social event) defining a generic approach to the director. A generic perspective on the role of the director would encompass: a historical dimension relative to the reasons for and stages of the 'emergence' of the director; a socio-political analysis concerning the relationship between the director, her/his institutionalisation, and the political realm; and the relationship between performance theory, practice and the contemporary role of the director. Such a generic approach is a new departure in theatre research and might resonate in the study of other collaborative artistic practices.

Measuring economies of horizontal and vertical integration in the US electric power industry:how costly is unbundling?

This research employs econometric analysis on a cross section of American electricity companies in order to study the cost implications associated with unbundling the operations of integrated companies into vertically and/or horizontally separated companies. Focusing on the representative sample average firm, we find that complete horizontal and vertical disintegration resulting in the creation of separate nuclear, conventional, and hydro electric generation companies as well as a separate firm distributing power to final consumers, results in a statistically significant 13.5 percent increase in costs. Maintaining a horizontally integrated generator producing nuclear, conventional, and hydro electric generation while imposing vertical separation by creating a stand alone distribution company, results in a lower but still substantial and statistically significant cost penalty amounting to an 8.1 % increase in costs relative to a fully integrated structure. As these results imply that a vertically separated but horizontally integrated generation firm would need to reduce the costs of generation by 11% just to recoup the cost increases associated with vertical separation, even the costs associated with just vertical unbundling are quite substantial. Our paper is also the first academic paper we are aware of that systematically considers the impact of generation mix on vertical, horizontal, and overall scope economies. As a result, we are able to demonstrate that the estimated cost of unbundling in the electricity sector is substantially influenced by generation mix. Thus, for example, we find evidence of strong vertical integration economies between nuclear and conventional generation, but little evidence for vertical integration benefits between hydro generation and the distribution of power. In contrast, we find strong evidence suggesting the presence of substantial horizontal integration economies associated with the joint production of hydro generation with nuclear and/or conventional fossil fuel generation. These results are significant because they indicate that the cost of unbundling the electricity sector will differ substantially in different systems, meaning that a blanket regulatory policy with regard to the appropriateness of vertical and horizontal unbundling is likely to be inappropriate.