Incorporating Water Sensitive Urban Design (WSUD) practices into the planning context:the conceptual case for lot-scale developments

In recent decades, a number of sustainable strategies and polices have been created to protect and preserve our water environments from the impacts of growing communities. The Australian approach, Water Sensitive Urban Design (WSUD), defined as the integration of urban planning and design with the urban water cycle management, has made considerable advances on design guidelines since 2000. WSUD stormwater management systems (e.g. wetlands, bioretentions, porous pavement etc), also known as Best Management Practices (BMPs) or Low Impact Development (LID), are slowly gaining popularity across Australia, the USA and Europe. There have also been significant improvements in how to model the performance of the WSUD technologies (e.g. MUSIC software). However, the implementation issues of these WSUD practices are mainly related to ongoing institutional capacity. Some of the key problems are associated with a limited awareness of urban planners and designers; in general, they have very little knowledge of these systems and their benefits to the urban environments. At the same time, hydrological engineers should have a better understanding of building codes and master plans. The land use regulations are equally as important as the physical site conditions for determining opportunities and constraints for implementing WSUD techniques. There is a need for procedures that can make a better linkage between urban planners and WSUD engineering practices. Thus, this paper aims to present the development of a general framework for incorporating WSUD technologies into the site planning process. The study was applied to lot-scale in the Melbourne region, Australia. Results show the potential space available for fitting WSUD elements, according to building requirements and different types of housing densities. © 2011 WIT Press.

Teaching our children when to eat:how parental feeding practices inform the development of emotional eating-a longitudinal experimental design

Background: Emotional eating in children has been related to the consumption of energy-dense foods and obesity, but the development of emotional eating in young children is poorly understood. Objectives: We evaluated whether emotional eating can be induced in 5-7-y-old children in the laboratory and assessed whether parental use of overly controlling feeding practices at 3-5 y of age predicts a greater subsequent tendency for children to eat under conditions of mild stress at ages 5-7 y. Design: Forty-one parent-child dyads were recruited to participate in this longitudinal study, which involved parents and children being observed consuming a standard lunch, completing questionnaire measures of parental feeding practices, participating in a research procedure to induce child emotion (or a control procedure), and observing children's consumption of snack foods. Results: Children at ages 5-7 y who were exposed to a mild emotional stressor consumed significantly more calories from snack foods in the absence of hunger than did children in a control group. Parents who reported the use of more food as a reward and restriction of food for health reasons with their children at ages 3-5 y were more likely to have children who ate more under conditions of negative emotion at ages 5-7 y. Conclusions: Parents who overly control children's food intake may unintentionally teach children to rely on palatable foods to cope with negative emotions. Additional research is needed to evaluate the implications of these findings for children's food intake and weight outside of the laboratory setting. This trial was registered at clinicaltrials.gov as NCT01122290.

Integration and devolvement of human resource practices in Nepal

Purpose: The purpose of this study is to explore the nature of human resource management in publicly listed finance sector companies in Nepal. In particular, it explores the extent to which HR practice is integrated into organisational strategy and devolved to line management. Design/methodology/ approach: A structured interview was conducted with the senior executive responsible for human resource management in 26 commercial banks and insurance companies in Nepal. Findings: The degree of integration of HR practice appears to be increasing within this sector, but this is dependent on the maturity of the organisations. The devolvement of responsibility to line managers is at best partial, and in the case of the insurance companies, it is more out of necessity due to the absence of a strong central HR function. Research limitations/implications: The survey is inevitably based on a small sample; however this represents 90 per cent of the relevant population. The data suggest that Western HR is making inroads into more developed aspects of Nepalese business. Compared with Nepalese business as a whole, the financial sector appears relatively Westernised, although Nepal still lags India in its uptake of HR practices. Practical implications: It appears unlikely from a cultural perspective that the devolvement of responsibility will be achieved as a result of HR strategy. National cultural, political and social factors continue to be highly influential in shaping the Nepalese business environment. Originality/value: Few papers have explored HR practice in Nepal. This paper contributes to the overall assessment of HR uptake globally and highlights emic features impacting on that uptake. © Emerald Group Publishing Limited.

The contribution of modularity to green operations practices

This paper discusses the possible contributions from modularity and industrial condominiums towards enhancing environmental performance in the automotive industry. The research described in this study is underpinned by a review of journal articles and books on the topics of: modularity of production systems; green operations practices, and the automotive industry and sustainability. The methodology is based on theoretical analysis of the contribution of the modular production system characteristics used in the automotive industry for Green Operations Practices (GOP). The following GOPs were considered: green buildings, eco-design, green supply chains, greener manufacturing, and reverse logistics. The results are theoretical in nature; however, due to the small number of studies that investigate the relationship between modularity and sustainability, this work is relevant to increase knowledge in academic circles and among practitioners in order to understand the possible environmental benefits from modular production systems. For instance, based upon our analysis, we could deduce that the existing modular production systems in the automotive industry may contribute in different ways to the implementation of GOPs. In all types of modularity, product simplification through the use of modules can enhance environmental performance and facilitate further activities such as maintenance and repair contributing to a longer life of cars on the road. Moreover, modules will make automobiles easier to disassembly, so increasing the chances of reuse of valuable components and a better final disposal of scrap. Regarding the potential benefits of each type of modularity, it is expected that modular consortia will have a better integration of environmental practices with suppliers and seize on high efficiency during manufacturing and logistics compared with conventional production systems.

The UK productivity gap in the service sector: do management practices matter?

Purpose – This paper aims to contribute to the debate on the drivers of the productivity gap that exists between the UK and its major international competitors. Design/methodology/approach – From the macro perspective the paper explores the quantitative evidence on the productivity differentials and how they are measured. From the micro perspective, the article explores the quantitative evidence on the role of management practices claimed to be a key determinant in promoting firm competitiveness and in bridging the UK gap. Findings – This study suggests that management practices are an ambiguous driver of firm productivity and higher firm performance. On the methodological side, qualitative and subjective measures of either management practices or firm performance are often used. This makes the results not comparable across studies, across firms or even within firms over time. Productivity and profitability are often and erroneously interchangeably used while productivity is only one element of firm performance. On the other hand, management practices are multi-dimensional constructs that generally do not demonstrate a straightforward relationship with productivity variables. To assume that they are the only driver of higher productivity may be misleading. Moreover, there is evidence of an inverse causal relationship between management practices and firm performance. This calls into question most empirical results of the extant literature based on the unidirectional assumption of direct causality between management practices and firm performance. Research limitations/implications – These and other issues suggest that more research is needed to deepen the understanding of the UK productivity gap and more quantitative evidence should be provided on the way in which management practices contribute to the UK competitiveness. Their impact is not easily measurable due to their complexity and their complementary nature and this is a fertile ground for further research. Originality/value – This paper brings together the evidence on the UK productivity gap and its main drivers, provided by the economics, management and performance measurement literature. This issue scores very highly in the agenda of policy makers and academics and has important implications for practitioners interested in evaluating the impact of managerial best practices.

Practices and views on fetal heart monitoring:A structured observation and interview study

Objective: To assess and explain deviations from recommended practice in National Institute for Clinical Excellence (NICE) guidelines in relation to fetal heart monitoring. Design: Qualitative study. Setting: Large teaching hospital in the UK. Sample: Sixty-six hours of observation of 25 labours and interviews with 20 midwives of varying grades. Methods: Structured observations of labour and semistructured interviews with midwives. Interviews were undertaken using a prompt guide, audiotaped, and transcribed verbatim. Analysis was based on the constant comparative method, assisted by QSR N5 software. Main outcome measures: Deviations from recommended practice in relation to fetal monitoring and insights into why these occur. Results: All babies involved in the study were safely delivered, but 243 deviations from recommended practice in relation to NICE guidelines on fetal monitoring were identified, with the majority (80%) of these occurring in relation to documentation. Other deviations from recommended practice included indications for use of electronic fetal heart monitoring and conduct of fetal heart monitoring. There is evidence of difficulties with availability and maintenance of equipment, and some deficits in staff knowledge and skill. Differing orientations towards fetal monitoring were reported by midwives, which were likely to have impacts on practice. The initiation, management, and interpretation of fetal heart monitoring is complex and distributed across time, space, and professional boundaries, and practices in relation to fetal heart monitoring need to be understood within an organisational and social context. Conclusion: Some deviations from best practice guidelines may be rectified through straightforward interventions including improved systems for managing equipment and training. Other deviations from recommended practice need to be understood as the outcomes of complex processes that are likely to defy easy resolution. © RCOG 2006.

A flexible, extensible object oriented real-time near photorealistic visualization system:the system framework design

In this paper we describe a novel, extensible visualization system currently under development at Aston University. We introduce modern programming methods, such as the use of data driven programming, design patterns, and the careful definition of interfaces to allow easy extension using plug-ins, to 3D landscape visualization software. We combine this with modern developments in computer graphics, such as vertex and fragment shaders, to create an extremely flexible, extensible real-time near photorealistic visualization system. In this paper we show the design of the system and the main sub-components. We stress the role of modern programming practices and illustrate the benefits these bring to 3D visualization. © 2006 Springer-Verlag Berlin Heidelberg.

Design and synthesis of potential antimicrobial agents

Tuberculosis is one of the most devastating diseases in the world primarily due to several decades of neglect and an emergence of multidrug-resitance strains (MDR) of M. tuberculosis together with the increased incidence of disseminated infections produced by other mycobacterium in AIDS patients. This has prompted the search for new antimycobacterial drugs. A series of pyridine-2-, pyridine-3-, pyridine-4-, pyrazine and quinoline-2-carboxamidrazone derivatives and new classes of carboxamidrazone were prepared in an automated fashion and by traditional synthesis. Over nine hundred synthesized compounds were screened for their anti mycobacterial activity against M. fortutium (NGTG 10394) as a surrogate for M. tuberculosis. The new classes of amidrazones were also screened against tuberculosis H37 Rv and antimicrobial activities against various bacteria. Fifteen tested compounds were found to provide 90-100% inhibition of mycobacterium growth of M. tuberculosis H37 Rv in the primary screen at 6.25 μg mL-1. The most active compound in the carboxamidrazone amide series had an MIG value of 0.1-2 μg mL-1 against M. fortutium. The enzyme dihydrofolate reductase (DHFR) has been a drug-design target for decades. Blocking of the enzymatic activity of DHFR is a key element in the treatment of many diseases, including cancer, bacterial and protozoal infection. The x-ray structure of DHFR from M. tuberculosis and human DHFR were found to have differences in substrate binding site. The presence of glycerol molecule in the Xray structure from M. tuberculosis DHFR provided opportunity to design new antifolates. The new antifolates described herein were designed to retain the pharmcophore of pyrimethamine (2,4- diamino-5(4-chlorophenyl)-6-ethylpyrimidine), but encompassing a range of polar groups that might interact with the M. tuberculosis DHFR glycerol binding pockets. Finally, the research described in this thesis contributes to the preparation of molecularly imprinted polymers for the recognition of 2,4-diaminopyrimidine for the binding the target. The formation of hydrogen bonding between the model functional monomer 5-(4-tert-butyl-benzylidene)-pyrimidine-2,4,6-trione and 2,4-diaminopyrimidine in the pre-polymerisation stage was verified by 1H-NMR studies. Having proven that 2,4-diaminopyrimidine interacts strongly with the model 5-(4-tert-butylbenzylidene)- pyrimidine-2,4,6-trione, 2,4-diaminopyrimidine-imprinted polymers were prepared using a novel cyclobarbital derived functional monomer, acrylic acid 4-(2,4,6-trioxo-tetrahydro-pyrimidin-5- ylidenemethyl)phenyl ester, capable of multiple hydrogen bond formation with the 2,4- diaminopyrimidine. The recognition property of the respective polymers toward the template and other test compounds was evaluated by fluorescence. The results demonstrate that the polymers showed dose dependent enhancement of fluorescence emissions. In addition, the results also indicate that synthesized MIPs have higher 2,4-diaminopyrimidine binding ability as compared with corresponding non-imprinting polymers.

An investigation of the retail marketing mix and its effectiveness in small shops

The recent history of small shop and independent retailing has been one of decline. The most desirable form of assistance is the provision of information which will increase the efficiency model of marketing mix effeciveness which may be applied in small scale retailing. A further aim is to enhance theoretical development in the marketing field. Recent changes in retailing have affected location, product range, pricing and promotion practices. Although a large number of variables representing aspects of the marketing mix may be identified, it is not possible, on the basis of currently available information, to quantify or rank them according to their effect on sales performance. In designing a suitable study a major issue is that of access to a suitable representative sample of small retailers. The publish nature of the retail activities involved facilitates the use of a novel observation approach to data collection. A cross-sectional survey research design was used focussing on a clustered random sample of greengrocers and gent's fashion outfitters in the West Midlands. Linear multiple regression was the main analytical technique. Powerful regression models were evolved for both types of retailing. For greengrocers the major influences on trade are pedestrian traffic and shelf display space. For gent's outfitters they are centrality-to-other shopping, advertising and shelf display space. The models may be utilised by retailers to determine the relative strength of marketing mix variables. The level of precision is not sufficient to permit cost benefit analysis. Comparison of the findings for the two distinct kinds of business studied suggests an overall model of marketing mix effectiveness might be based on frequency of purchase, homogeneity of the shopping environment, elasticity of demand and bulk characteristics of the good sold by a shop.

Computer aided geometric design of form-rolls for NC manufacture

Conventional methods of form-roll design and manufacture for Cold Roll-Forming of thin-walled metal sections have been entirely manual, time consuming and prone to errors, resulting in inefficiency and high production costs. With the use of computers, lead time can be significantly improved, particularly for those aspects involving routine but tedious human decisions and actions. This thesis describes the development of computer aided tools for producing form-roll designs for NC manufacture in the CAD/CAM environment. The work was undertaken to modernise the existing activity of a company manufacturing thin-walled sections. The investigated areas of the activity, including the design and drafting of the finished section, the flower patterns, the 10 to 1 templates, and the rolls complete with pinch-difference surfaces, side-rolls and extension-contours, have been successfully computerised by software development . Data generated by the developed software can be further processed for roll manufacturing using NC lathes. The software has been specially designed for portability to facilitate its implementation on different computers. The Opening-Radii method of forming was introduced as a subsitute to the conventional method for better forming. Most of the essential aspects in roll design have been successfully incorporated in the software. With computerisation, extensive standardisation in existing roll design practices and the use of more reliable and scientifically-based methods have been achieved. Satisfactory and beneficial results have also been obtained by the company in using the software through a terminal linked to the University by a GPO line. Both lead time and productivity in roll design and manufacture have been significantly improved. It is therefore concluded that computerisation in the design of form-rolls for automation by software development is viable. The work also demonstrated the promising nature of the CAD/CAM approach.

Design and construction for traditional house building

This study is concerned with quality and productivity aspects of traditional house building. The research focuses on these issues by concentrating on the services and finishing stages of the building process. These are work stages which have not been fully investigated in previous productivity related studies. The primary objective of the research is to promote an integrated design and construction led approach to traditional house building based on an original concept of 'development cycles'. This process involves the following: site monitoring; the analysis of work operations; implementing design and construction changes founded on unique information collected during site monitoring; and subsequent re-monitoring to measure and assess Ihe effect of change. A volume house building firm has been involved in this applied research and has allowed access to its sites for production monitoring purposes. The firm also assisted in design detailing for a small group of 'experimental' production houses where various design and construction changes were implemented. Results from the collaborative research have shown certain quality and productivity improvements to be possible using this approach, albeit on a limited scale at this early experimental stage. The improvements have been possible because an improved activity sampling technique, developed for, and employed by the study, has been able to describe why many quality and productivity related problems occur during site building work. Experience derived from the research has shown the following attributes to be important: positive attitudes towards innovation; effective communication; careful planning and organisation; and good coordination and control at site level. These are all essential aspects of quality led management and determine to a large extent the overall success of this approach. Future work recommendations must include a more widespread use of innovative practices so that further design and construction modifications can be made. By doing this, productivity can be improved, cost savings made and better quality afforded.

Beyond theory:an examination of lean new product introduction practices in the UK

Interest is growing around the application of lean techniques to new product introduction (NPI). Although a relatively emergent topic compared with the application of ‘lean’ within the factory, since 2000 there has been an exponential rise in the literature on this subject. However, much of this work focuses on describing and extolling the virtues of the ‘Toyota approach’ to design. Therefore, by way of a stock take for the UK, the present authors' research has set out to understand how well lean product design practices have been adopted by leading manufacturers. This has been achieved by carrying out in-depth case studies with three carefully selected manufacturers of complex engineered products. This paper describes these studies, the detailed results and subsequent findings, and concludes that both the awareness and adoption of practices is generally embryonic and far removed from the theory advocated in the literature.

State-of-the-art in lean design engineering:a literature review on white collar lean

Lean is usually associated with the ‘operations’ of a manufacturing enterprise; however, there is a growing awareness that these principles may be transferred readily to other functions and sectors. The application to knowledge-based activities such as engineering design is of particular relevance to UK plc. Hence, the purpose of this study has been to establish the state-of-the-art, in terms of the adoption of Lean in new product development, by carrying out a systematic review of the literature. The authors' findings confirm the view that Lean can be applied beneficially away from the factory; that an understanding and definition of value is key to success; that a set-based (or Toyota methodology) approach to design is favoured together with the strong leadership of a chief engineer; and that the successful implementation requires organization-wide changes to systems, practices, and behaviour. On this basis it is felt that this review paper provides a useful platform for further research in this topic.

An exploration of policies and practices used to showcase production facilities

Manufacturers who seek innovative ways in which to differentiate their products and services should not overlook the value of showcasing their production facilities. By careful design, visitors can be exposed to a series of experiences that can help to emphasize the value built into products. This topic has, however, received almost no attention by manufacturing researchers. Therefore, this paper describes a study of six manufacturers and, from this, proposes a set of guidelines for showcasing production facilities. Although exploratory, this work provides both a guide to manufacturers and a platform for more in-depth research. The guidelines and the case studies on which they are based are all described within the paper.

Inducing preschool children's emotional eating:relations with parental feeding practices

Background: Children's emotional eating is related to greater body mass index and a less-healthy diet, but little is known about the early development of this behavior. Objective: This study aimed to examine the relations between preschool children's emotional eating and parental feeding practices by using experimental manipulation of child mood and food intake in a laboratory setting. Design: Twenty-five 3–5-y-old children and their mothers sat together and ate a standard meal to satiety. Mothers completed questionnaires regarding their feeding practices. Children were assigned to a control or negative mood condition, and their consumption of snack foods in the absence of hunger was measured. Results: Children whose mothers often used food to regulate emotions ate more cookies in the absence of hunger than did children whose mothers used this feeding practice infrequently, regardless of condition. Children whose mothers often used food for emotion regulation purposes ate more chocolate in the experimental condition than in the control condition. The pattern was reversed for children of mothers who did not tend to use food for emotion regulation. There were no significant effects of maternal use of restriction, pressure to eat, and use of foods as a reward on children's snack food consumption. Conclusions: Children of mothers who use food for emotion regulation consume more sweet palatable foods in the absence of hunger than do children of mothers who use this feeding practice infrequently. Emotional overeating behavior may occur in the context of negative mood in children whose mothers use food for emotion regulation purposes. This trial was registered at clinicaltrials.gov as NCT01122290.