The environmental impacts of technical change

The thesis is concerned with relationships between profit, technology and environmental change. Existing work has concentrated on only a few questions, treated at either micro or macro levels of analysis. And there has been something of an impasse since the neoclassical and neomarxist approaches are either in direct conflict (macro level), or hardly interact (micro level). The aim of the thesis was to bypass this impasse by starting to develop a meso level of analysis that focusses on issues largely ignored in the traditional approaches - on questions about distribution. The first questions looked at were descriptive - what were the patterns of distribution over time of the variability in types and rates of environmental change, and in particular, was there any evidence of periodization? Two case studies were used to examine these issues. The first looked at environmental change in the iron and steel industry since 1700, and the second studied pollution in five industries in the basic processing sector. It was established that environmental change has been markedly periodized, with an apparently fairly regular `cycle length' of about fifty years. The second questions considered were explanatory - whether and how this periodization could be accounted for by reference to variations in aspects of profitability and technical change. In the iron and steel industry, it was found that diffusion rates and the rate of nature of innovation were periodized on the same pattern as was environmental change. And the same sort of variation was also present in the realm of profits, as evidenced by cyclical changes in output growth. Simple theoretical accounts could be given for all the empirically demonstrable links, and it was suggested that the most useful models at this meso level of analysis are provided by structural change models of economic development.

How green is green? A framework for environmental performance assessment in operations

This paper presents a framework based upon a relationship between environmental benefits and the investments and costs needed to implement and run company operations. As the results of environmental management become more evident it is proposed that the benefits rather than the environmental impacts are measured in the analysis of environmental performance. Four categories, or stages, are defined in this paper: “creative-green”, “expensive-green”, “inefficient-green or beginner”, and finally, the “complacent” stage. The paper describes the characteristics of each category and provides examples of indicators that could be used to measure environmental benefits. Qualitative and quantitative methods are necessary to classify companies according to the framework. It is believed that this paper can assist companies and public organisations to assess operations and projects considering their level of sustainability. The proposed framework can impact FDI and environmental policies in the public arena, and foster innovation on environmental practices within the private sector.

Social and environmental accountability in developing countries

The principal aim of this chapter is to undertake a critical review of the social and environmental accountability of global business activities in developing countries. While global business activities have contributed to the economic development of developing countries they have many adverse social and environmental consequences which are often under-studied. I explore the role of accounting in making those consequences visible. The chapter, however, concludes that while social and environmental accounting has the potential to raise the visibility of social and environmental impacts of corporate activities it often fails to do so particularly under the current voluntary disclosure regime where corporations can choose what to report and how to report. This is even more pronounced in the developing countries because of their vulnerabilities arising from various social and environmental problems. The chapter argues for a case of ‘surrogate accountability’ as an alternative to the current corporate driven form of accountability.

Managing the impact on biodiversity of supply chain companies

Industrial development has had a major role in creating the situation where bio-diverse materials and services essential for sustaining business are under threat. A key contributory factor to biodiversity decline comes from the cumulative impacts of extended supply chain business operations. In order to contribute to stopping this decline, the industrial world needs to form a better understanding of the way it utilizes the business and biodiversity agenda in its wider operations. This thesis investigates the perceptions and attitudes to biodiversity from government, society and a wide cross-section of industry. The research includes the extent of corporate attention to and use of environmental business tools and guidelines in reporting on biodiversity issues. A case study of three companies from different industrial sectors is undertaken to observe procurement and related environmental management of their supply chains. The use of accredited and non-accredited environmental management systems (EMS) are analysed as frameworks for introducing biodiversity aspects into supply chain management. The outcome is a methodology, which can be used either as a bespoke in-house biodiversity management system or within an accredited ISO 14001 EMS, for incorporating the assessment and management of the potential risks and opportunities involving environmental impacts on biodiversity of supply chain companies.

Going green: prospects for SME's to attain ISO 14001 and the challenges they face in the process

This research aimed to identify any common factors that have enabled and/or motivated SMEs to successfully implement ISO 14001 whilst the majority have not. It also identified what challenges and barriers SMEs face in doing so and how some have overcome these. The existing literature suggests that the majority of SMEs perceive their environmental impacts to be proportional to their size; have a poor understanding of environmental issues; have a poor awareness of environmental regulations; do that have the necessary expertise or leadership to address environmental issues and that SMEs with an environmental management system such as ISO 14001 are very much the minority. The main factors that influenced whether an SME had implemented ISO 14001 were: competitive advantage, regulatory compliance, supply chain pressures, leadership, expertise, resources and external support. This research used qualitative analysis of interviews with managers and directors from 8 SMEs with ISO 14001 and 4 without. All of the SMEs were based in the West Midlands or Staffordshire. Interviews were also conducted with 3 organisations offering support to businesses on environmental issues and with 1 large business who was engaging their suppliers (which included SMEs within this sample) on environmental issues. The research found that there were four main factors that enabled or motivated the SMEs to implement ISO 14001, these were: leadership, supply chain pressures, external support and SMEs' history and experience of accredited management systems. The main challenges that these business had to overcome and that prevented the other SMEs from achieving ISO 14001 were: achieving regulatory compliance, perceived financial cost, lack of perceived competitive advantage, access to relevant and affordable support and for those SMEs without ISO 14001 there was very little perceived external pressure or need for them to do so.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.

Supply chain innovation for competing in highly competitive markets:challenges and solutions

Rapid changes in technological development are forcing businesses to continuously innovate to improve their competitiveness, which is particularly evident in logistics and supply chain management (SCM), where innovation impacts both the strategic and operational levels. Supply Chain Innovation for Competing in Highly Dynamic Markets: Challenges and Solutions investigates the role of innovation in the management of supply chains of today. This book focuses on supply chain integration from both strategic and operational perspectives and the impact of information technology-related innovation in supply chain and logistics service industries. It also analyzes how environmental innovation affects logistical decisions throughout the supply chain and the strategies employed in managing logistics-related environmental impacts. Finally, the book explores theoretical and practical implications of innovation in the management of supply systems.

Conceptual Building Information Modelling Framework for Whole‐house Refurbishment based on LCC and LCA

The UK government aims at achieving 80% CO2 emission reduction by 2050 which requires collective efforts across all the UK industry sectors. In particular, the housing sector has a large potential to contribute to achieving the aim because the housing sector alone accounts for 27% of the total UK CO2 emission, and furthermore, 87% of the housing which is responsible for current 27% CO2 emission will still stand in 2050. Therefore, it is essential to improve energy efficiency of existing housing stock built with low energy efficiency standard. In order for this, a whole‐house needs to be refurbished in a sustainable way by considering the life time financial and environmental impacts of a refurbished house. However, the current refurbishment process seems to be challenging to generate a financially and environmentally affordable refurbishment solution due to the highly fragmented nature of refurbishment practice and a lack of knowledge and skills about whole‐house refurbishment in the construction industry. In order to generate an affordable refurbishment solution, diverse information regarding costs and environmental impacts of refurbishment measures and materials should be collected and integrated in right sequences throughout the refurbishment project life cycle among key project stakeholders. Consequently, various researchers increasingly study a way of utilizing Building Information Modelling (BIM) to tackle current problems in the construction industry because BIM can support construction professionals to manage construction projects in a collaborative manner by integrating diverse information, and to determine the best refurbishment solution among various alternatives by calculating the life cycle costs and lifetime CO2 performance of a refurbishment solution. Despite the capability of BIM, the BIM adoption rate is low with 25% in the housing sector and it has been rarely studied about a way of using BIM for housing refurbishment projects. Therefore, this research aims to develop a BIM framework to formulate a financially and environmentally affordable whole‐house refurbishment solution based on the Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) methods simultaneously. In order to achieve the aim, a BIM feasibility study was conducted as a pilot study to examine whether BIM is suitable for housing refurbishment, and a BIM framework was developed based on the grounded theory because there was no precedent research. After the development of a BIM framework, this framework was examined by a hypothetical case study using BIM input data collected from questionnaire survey regarding homeowners’ preferences for housing refurbishment. Finally, validation of the BIM framework was conducted among academics and professionals by providing the BIM framework and a formulated refurbishment solution based on the LCC and LCA studies through the framework. As a result, BIM was identified as suitable for housing refurbishment as a management tool, and it is timely for developing the BIM framework. The BIM framework with seven project stages was developed to formulate an affordable refurbishment solution. Through the case study, the Building Regulation is identified as the most affordable energy efficiency standard which renders the best LCC and LCA results when it is applied for whole‐house refurbishment solution. In addition, the Fabric Energy Efficiency Standard (FEES) is recommended when customers are willing to adopt high energy standard, and the maximum 60% of CO2 emissions can be reduced through whole‐house fabric refurbishment with the FEES. Furthermore, limitations and challenges to fully utilize BIM framework for housing refurbishment were revealed such as a lack of BIM objects with proper cost and environmental information, limited interoperability between different BIM software and limited information of LCC and LCA datasets in BIM system. Finally, the BIM framework was validated as suitable for housing refurbishment projects, and reviewers commented that the framework can be more practical if a specific BIM library for housing refurbishment with proper LCC and LCA datasets is developed. This research is expected to provide a systematic way of formulating a refurbishment solution using BIM, and to become a basis for further research on BIM for the housing sector to resolve the current limitations and challenges. Future research should enhance the BIM framework by developing more detailed process map and develop BIM objects with proper LCC and LCA Information.