The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

Practically oriented design projects in mechatronics engineering:a case study of design experiences and outcomes

This paper discusses and presents a case study of a practically oriented design project together with a few examples of implemented design projects recently incorporated into an undergraduate system course at the mechatronics engineering department in Ah-Balqa’ Applied University. These projects have had a positive impact on both the department and its graduates. The focus of these projects is the design and implementation of processor-based system. This helps graduate students cross the border between hardware design and software design. Our case study discusses the research methodology adopted for the physical development of the project, the technology used in the project, and the design experiences and outcomes.

Total quality management in English language teaching:a case study in Turkish higher education

The need to improve the management of language learning organizations in the light of the trend toward mass higher education and of the use of English as a world language was the starting point of this thesis. The thesis aims to assess the relevance, adequacy and the relative success of Total Quality Management (TQM) as a management philosophy. Taking this empirical evidence a TQM-oriented management project in a Turkish Higher Education context, the thesis observes the consequences of a change of organizational culture, with specific reference to teachers' attitudes towards management. Both qualitative and quantitative devices are employed to plot change and the value of these devices for identifying such is considered. The main focus of the thesis is the Soft S's (Shared Values, Style, Staff and Skills) of an organization rather than the Hard S's (System, Structure, Strategy). The thesis is not concerned with the teaching and learning processes, though the PDCA cycle (the Action Research Cycle) did play a part in the project for both teachers and the researcher involved in this study of organizational development. Both before the management project was launched, and at the end of the research period, the external measurement devices (Harrison's Culture Specification Device and Hofstede's VSM) were used to describe the culture of the Centre. During the management project, internal measurement devices were used to record the change including middle-management style change (the researcher in this case). The time period chosen for this study was between September 1991 and June 1994. During this period, each device was administered twice within a specific time period, ranging from a year to 32 months.

Perceptions of learning and teaching quality in Higher Education:developing a culture of co-creation of value

Perceptions about the quality of learning and teaching in Higher Education has for many years focused upon the application of market based principles. This includes the notion of students as “customers” of the Higher Education Institutions (HEI) service. We argue that the application of the customer analogy is unhelpful however, as students this approach is likely to affect student expectations about the service and their judgements about its quality. The purpose of this paper is to propose a study consisting of a series of interventions to develop a culture of value co-creation at a UK based HEI. By introducing CCV principles, it is hoped to steer students away from seeing themselves as “customers”, and passive recipients of in the learning and teaching process, to one where they take responsibility for their own learning experience, to be explored and acted upon in partnership with their lecturers and other stakeholders.

Bringing engineering education to life – an empirical approach to learning and teaching

Learning and teaching approaches to engineering are generally perceived to be difficult and academically challenging. Such challenges are reflected in high levels of student attrition and failure. In addressing this issue, a unique approach to engineering education has been developed by the paper authors. This approach, which is suitable for undergraduate and postgraduate levels, brings together pedagogic and engineering epistemologies in an empirically grounded framework. It is underpinned by three distinctive concepts: Relationships, Variety & Synergy. Based upon research, the R + V + S approach to Engineering Education provides a learning and teaching strategy, which in enhancing the student experience, increases retention and positively impacts student success [S2]. Based on the study findings, this paper shows how, by designing engineering education around the concepts of Relationships, Variety and Synergy, the student learning experience becomes one that is academically challenging yet beneficial to both students and engineering educators. The challenge is to widen and test the approach in other areas of engineering education, before going on to investigate the value of the approach in other disciplines.

Good practice guide in learning and teaching

Once again this publication is produced to celebrate and promote good teaching and learning support and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. We have again changed our approach for this 2007/08 edition (our fifth) of the Aston Business School Good Practice Guide. As before, some contributions were selected from those identifying interesting best practice on their Annual Module Reflection Forms in 2006/2007. Brookes? contribution this year is directly from her annual reflection. Other contributors received HELM (Research Centre in Higher Education Learning and Management) small research grants in 2006/2007. Part of the conditions were for them to write an article for this publication. We have also been less tight on the length of the articles this year. Some contributions are, therefore, on the way to being journal articles. HELM will be working with these authors to help develop these for publication. Looking back over the last five years it is brilliant to see how many different people have contributed over the years and, therefore, how much innovative learning and teaching work has been taking place in ABS over this time. In the first edition we were just pleased for people to write a few pages on their teaching. Now things have changed dramatically. The majority of the articles are grounded in empirical research (some funded by HELM small research grants) and Palmer?s article was produced as part of the University?s Postgraduate Certificate in Learning and Teaching. Most encouraging of all, four of this year?s articles have since been developed further and submitted to refereed journals. We await news of publication as we go to press. It is not surprising that how to manage large groups still remains a central theme of the articles, ABS has a large and still growing student body. Essex and Simpson have looked at trying to encourage students to attend taught sessions, on the basis that there is a strong correlation between attendance and higher performance. Their findings are forming the platform of a further study currently being carried out in the Undergraduate Programme. A number of the other articles concentrate on trying to encourage students to engage with study in an innovative way. This is particularly obvious in Shaw?s work. Everyone who has been around campus lately has had evidence that the students on Duncan?s modules have clearly been inspired. I found myself, for example, playing golf in the student dining room as part of this initiative! The articles by Jarzabkowski & Guilietti and Ho involved much larger surveys. This is another first for the Good Practice Guide and marks the first step on what will clearly be larger research efforts for these authors in this area. We look forward to the journal publications which will result from this work. The last articles are the result of HELM?s hosting of the national conference of the Higher Education Academy?s Business, Management, Accounting and Finance (BMAF) Subject Centre Conference in May 2007. Belal and Foster have written about their impressions of the Conference and Andrews has included the paper she gave. The papers on employability and widening participation are the centre of HELM?s current work. In the second volume we mentioned the launch of the School?s Research Centre in Higher Education Learning and Management (HELM). Since then HELM has stimulated a lot of activity across the School (and University) particularly linking research and teaching. A list of the HELM seminars for 2007/2008 is listed as Appendix 1 of this publication. Further details can be obtained from Catherine Foster (c.s.foster@aston.ac.uk), who coordinates the HELM seminars. We have also been working on a list of target journals to guide ABS staff who wish to publish in this area. These are included as Appendix 2 of this publication. May I thank the contributors for taking time out of their busy schedules to write the articles and to Julie Green, the Quality Manager, for putting the varying diverse approaches into a coherent and publishable form and for agreeing to fund the printing of this volume.

A detailed design study of leaching and ancillary processes in the hydrometallurgical extraction of iron from iron bearing feedstocks

A systematic survey of the possible methods of chemical extraction of iron by chloride formation has been presented and supported by a comparable study of :feedstocks, products and markets. The generation and evaluation of alternative processes was carried out by the technique of morphological analysis vihich was exploited by way of a computer program. The final choice was related to technical feasibility and economic viability, particularly capital cost requirements and developments were made in an estimating procedure for hydrometallurgjcal processes which have general applications. The systematic exploration included the compilation of relevant data, and this indicated a need.to investigate precipitative hydrolysis or aqueous ferric chloride. Arising from this study, two novel hydrometallurgical processes for manufacturing iron powder are proposed and experimental work was undertaken in the following .areas to demonstrate feasibility and obtain basic data for design purposes: (1) Precipitative hydrolysis of aqueous ferric chloride. (2) Gaseous chloridation of metallic iron, and oxidation of resultant ferrous chloride. (3) Reduction of gaseous ferric chloride with hydrogen. (4) Aqueous acid leaching of low grade iron ore. (5) Aqueous acid leaching of metallic iron. The experimentation was supported by theoretical analyses dealing with: (1) Thermodynamics of hydrolysis. (2) Kinetics of ore leaching. (3) Kinetics of metallic iron leaching. (4) Crystallisation of ferrous chloride. (5) Oxidation of anhydrous ferrous chloride. (6) Reduction of ferric chloride. Conceptual designs are suggested fbr both the processes mentioned. These draw attention to areas where further work is necessary, which are listed. Economic analyses have been performed which isolate significant cost areas, und indicate total production costs. Comparisons are mode with previous and analogous proposals for the production of iron powder.

A cybernetic methodology to study and design human activities

This thesis offers a methodology to study and design effective communication mechanisms in human activities. The methodology is focused in the management of complexity. It is argued that complexity is not something objective that can be worked out analytically, but something subjective that depends on the viewpoint. Also it is argued that while certain social contexts may inhibit, others may enhance the viewpoint's capabilities to deal with complexity. Certain organisation structures are more likely than others to allow individuals to release their potentials. Thus, the relevance of studying and designing effective organisations. The first part of the thesis offers a `cybernetic methodology' for problem solving in human activities, the second offers a `method' to study and design organisations. The cybernetics methodology discussed in this work is rooted in second order cybernetics, or the cybernetics of the observing systems (Von Foester 1979, Maturana and Varela 1980). Its main tenet is that the known properties of the real world reside in the individual and not in the world itself. This view, which puts emphasis in a, by nature, one sided and unilateral appreciation of reality, triggers the need for dialogue and conversations to construct it. The `method' to study and design organisations, it based on Beer's Viable System Model (Beer 1979, 1981, 1985). This model permits us to assess how successful is an organisation in coping with its environmental complexity, and, moreover, permits us to establish how to make more effective the responses to this complexity. These features of the model are of great significance in a world where complexity is perceived to be growing at an unthinkable pace. But, `seeing' these features of the model assumes an effective appreciation of organisational complexity; hence the need for the methodological discussions offered by the first part of the thesis.

Rationalisation and improvement of a company's engineering design procedures

There is a great deal of literature about the initial stages of innovative design. This is the process whereby a completely new product is conceived, invented and developed. In industry, however, the continuing success of a company is more often achieved by improving or developing existing designs to maintain their marketability. Unfortunately, this process of design by evolution is less well documented. This thesis reports the way in which this process was improved for the sponsoring company. The improvements were achieved by implementing a new form of computer aided design (C.A.D.) system. The advent of this system enabled the company to both shorten the design and development time and also to review the principles underlying the existing design procedures. C.A.D. was a new venture for the company and care had to be taken to ensure that the new procedures were compatible with the existing design office environment. In particular, they had to be acceptable to the design office staff. The C.A.D. system produced guides the designer from the draft specification to the first prototype layout. The computer presents the consequences of the designer's decisions clearly and fully, often by producing charts and sketches. The C.A.D. system and the necessary peripheral facilities were implemented, monitored and maintained. The system structure was left sufficiently flexible for maintenance to be undertaken quickly and effectively. The problems encountered during implementation are well documented in this thesis.

Logics, thresholds, strategic power, and the promotion of liberalisation by governments: a case study from British Higher Education

Liberalisation has become an increasingly important policy trend, both in the private and public sectors of advanced industrial economies. This article eschews deterministic accounts of liberalisation by considering why government attempts to institute competition may be successful in some cases and not others. It considers the relative strength of explanations focusing on the institutional context, and on the volume and power of sectoral actors supporting liberalisation. These approaches are applied to two attempts to liberalise, one successful and one unsuccessful, within one sector in one nation – higher education in Britain. Each explanation is seen to have some explanatory power, but none is sufficient to explain why competition was generalised in the one case and not the other. The article counsels the need for scholars of liberalisation to be open to multiple explanations which may require the marshalling of multiple sources and types of evidence.

Breaking down barriers:teenage girls’ perceptions of engineering as a study and career choice

Background: Stereotypically perceived to be an ‘all male’ occupation, engineering has for many years failed to attract high numbers of young women [1,2]. The reasons for this are varied, but tend to focus on misconceptions of the profession as being more suitable for men. In seeking to investigate this issue a participatory research approach was adopted [3] in which two 17 year-old female high school students interviewed twenty high school girls. Questions focused on the girls’ perceptions of engineering as a study and career choice. The findings were recorded and analysed using qualitative techniques. The study identified three distinctive ‘influences’ as being pivotal to girls’ perceptions of engineering; pedagogical; social; and, familial. Pedagogical Influences: Pedagogical influences tended to focus on science and maths. In discussing science, the majority of the girls identified biology and chemistry as more ‘realistic’ whilst physics was perceived to more suitable for boys. The personality of the teacher, and how a particular subject is taught, proved to be important influences shaping opinions. Social Influences: Societal influences were reflected in the girls’ career choice with the majority considering medical or social science related careers. Although all of the girls believed engineering to be ‘male dominated’, none believed that a woman should not be engineer. Familial Influences: Parental influence was identified as key to career and study choice; only two of the girls had discussed engineering with their parents of which only one was being actively encouraged to pursue a career in engineering. Discussion: The study found that one of the most significant barriers to engineering is a lack of awareness. Engineering did not register in the girls’ lives, it was not taught in school, and only one had met a female engineer. Building on the study findings, the discussion considers how engineering could be made more attractive to young women. Whilst misconceptions about what an engineer is need to be addressed, other more fundamental pedagogical barriers, such as the need to make physics more attractive to girls and the need to develop the curriculum so as to meet the learning needs of 21st Century students are discussed. By drawing attention to the issues around gender and the barriers to engineering, this paper contributes to current debates in this area – in doing so it provides food for thought about policy and practice in engineering and engineering education.

A bridge too far? Breaching the research/learning and teaching nexus in a previously research-led university

The relationship between research and learning and teaching represents what has been described as ‘amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education’ (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (i.e. founded upon academic rigour and evidence), has long been discussed in the literature (see for example, Elton, 2005 & Healey, 2000). However, the practicalities of promoting an empirical and evidence-based approach to teaching within a research-led institution makes dealing with the research/learning and teaching nexus a somewhat challenging proposition. Drawing upon the findings of a mixed methodological study, this paper critically analyses the pedagogical, organisational and practical issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice. Comprising an eclectic group of staff drawn from across the five Schools in the University, the Centre is dedicated to enhancing student learning through the development of evidence based teaching practice. Based upon the premise that the promotion of research-led teaching will act to bring teaching and research together, and in doing so enhance students learning experiences (Simmons & Elen 2007), the paper critically analyses the challenges encountered by staff responsible for developing and introducing a new learning & teaching focused organisational strategy (by reflecting on the previous 12 months work). In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management. Focusing specifically on the impact of the new policy on various aspects of university life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. It concludes by arguing that the move towards becoming a more learning-focused university has started to develop an awareness of the positive impact the change initiative is having on the student experience and wider institution; whilst also drawing attention to the organisational challenges ahead.

Postgraduate study and managers' subsequent work experience:an exploratory evaluation

Drawing on an exploratory qualitative study, this article considers the link between business school teaching at graduate level and subsequent work behaviour and experiences of former students. It evaluates the student experience some time after graduation. The findings of the retrospective evaluation point to the value of classroom peer discussion, the testing of ideas against prior work experience and the opportunity to make sense of organisational issues by setting them into broader context. The importance of andragogical approaches to teaching is discussed as well as the implications of the study findings for teaching quality enhancement. © 2009 Taylor & Francis.

Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.