Theoretical and empirical evaluation of phakic and pseudophakic accomodation

The binding theme of this thesis is the examination of both phakic and pseudophakic accommodation by means of theoretical modelling and the application of a new biometric measuring technique. Anterior Segment Optical Coherence Tomography (AS-OCT) was used to assess phakic accommodative changes in 30 young subjects (19.4 2.0 years; range, 18 to 25 years). A new method of assessing curvature change with this technique was employed with limited success. Changes in axial accommodative spacing, however, proved to be very similar to those of the Scheimpflug-based data. A unique biphasic trend in the position of the posterior crystalline lens surface during accommodation was discovered, which has not been alluded to in the literature. All axial changes with accommodation were statistically significant (p < 0.01) with the exception of corneal thickness (p = 0.81). A two-year follow-up study was undertaken for a cohort of subjects previously implanted with a new accommodating intraocular lens (AIOL) (Lenstec Tetraflex KH3500). All measures of best corrected distance visual acuity (BCDVA; +0.04 0.24 logMAR), distance corrected near visual acuity (DCNVA; +0.61 0.17 logMAR) and contrast sensitivity (+1.35 0.21 log units) were good. The subjective accommodation response quantified with the push-up technique (1.53 0.64 D) and defocus curves (0.77 0.29 D) was greater than the objective stimulus response (0.21 0.19 D). AS-OCT measures with accommodation stimulus revealed a small mean posterior movement of the AIOLs (0.02 0.03 mm for a 4.0 D stimulus); this is contrary to proposed mechanism of the anterior focus-shift principle.

Public participation by appeal - insights from empirical evaluation in Finland

Environmental law increasingly provides for participatory rights, including appeal rights, to ensure informed, legitimate decision-making. Despite consensus around the general need for participatory rights, including strong ones such as a right to appeal, public participation in environmental decision-making is often criticised. The critics' main argument is that the negative side effects resulting particularly from the use of strong participatory rights outweigh their benefits. Recent regulatory trends arising from better regulation policy to make environmental decision-making more cost-efficient tend to pay special attention to such arguments despite limited empirical evidence. This article provides evidence using material-concerning appeals against pollution permits in Finland and suggests that judicial review is a necessary and effective process for both protecting citizens' rights and improving the quality of environmental protection. © The Author [2008]. Published by Oxford University Press. All rights reserved.

AstonCAT-plus:an efficient specialist for the TAC market design tournament

This paper describes the strategies used by AstonCAT-Plus, the post-tournament version of the specialist designed for the TAC Market Design Tournament 2010. It details how AstonCATPlus accepts shouts, clears market, sets transaction prices and charges fees. Through empirical evaluation, we show that AstonCAT-Plus not only outperforms AstonCAT (tournament version) significantly but also achieves the second best overall score against some top entrants of the competition. In particular, it achieves the highest allocative efficiency, transaction success rate and average trader profit among all the specialists in our controlled experiments.

Pragmatic development of service based real-time change data capture

This thesis makes a contribution to the Change Data Capture (CDC) field by providing an empirical evaluation on the performance of CDC architectures in the context of realtime data warehousing. CDC is a mechanism for providing data warehouse architectures with fresh data from Online Transaction Processing (OLTP) databases. There are two types of CDC architectures, pull architectures and push architectures. There is exiguous data on the performance of CDC architectures in a real-time environment. Performance data is required to determine the real-time viability of the two architectures. We propose that push CDC architectures are optimal for real-time CDC. However, push CDC architectures are seldom implemented because they are highly intrusive towards existing systems and arduous to maintain. As part of our contribution, we pragmatically develop a service based push CDC solution, which addresses the issues of intrusiveness and maintainability. Our solution uses Data Access Services (DAS) to decouple CDC logic from the applications. A requirement for the DAS is to place minimal overhead on a transaction in an OLTP environment. We synthesize DAS literature and pragmatically develop DAS that eciently execute transactions in an OLTP environment. Essentially we develop effeicient RESTful DAS, which expose Transactions As A Resource (TAAR). We evaluate the TAAR solution and three pull CDC mechanisms in a real-time environment, using the industry recognised TPC-C benchmark. The optimal CDC mechanism in a real-time environment, will capture change data with minimal latency and will have a negligible affect on the database's transactional throughput. Capture latency is the time it takes a CDC mechanism to capture a data change that has been applied to an OLTP database. A standard definition for capture latency and how to measure it does not exist in the field. We create this definition and extend the TPC-C benchmark to make the capture latency measurement. The results from our evaluation show that pull CDC is capable of real-time CDC at low levels of user concurrency. However, as the level of user concurrency scales upwards, pull CDC has a significant impact on the database's transaction rate, which affirms the theory that pull CDC architectures are not viable in a real-time architecture. TAAR CDC on the other hand is capable of real-time CDC, and places a minimal overhead on the transaction rate, although this performance is at the expense of CPU resources.

Controlling system uncertainty in sport and work

An applied psychological framework for coping with performance uncertainty in sport and work systems is presented. The theme of personal control serves to integrate ideas prevalent in industrial and organisational psychology, the stress literature and labour process theory. These commonly focus on the promotion of tacit knowledge and learned resourcefulness in individual performers. Finally, data from an empirical evaluation of a development training programme to facilitate self-regulation skills in professional athletes are briefly highlighted.

A four-factor user interaction model for content-based image retrieval

In order to bridge the “Semantic gap”, a number of relevance feedback (RF) mechanisms have been applied to content-based image retrieval (CBIR). However current RF techniques in most existing CBIR systems still lack satisfactory user interaction although some work has been done to improve the interaction as well as the search accuracy. In this paper, we propose a four-factor user interaction model and investigate its effects on CBIR by an empirical evaluation. Whilst the model was developed for our research purposes, we believe the model could be adapted to any content-based search system.

Reflection and reflexivity in reviewing and evaluating CDIO:an empirical approach to evaluation

Facilitated by an Engineer and a Social Scientist, both of whom have expertise in Engineering Education Research and Evaluation (EERE), this interactive workshop is divided into three main sections, each one focusing on a different area of evaluation. It will build on research conducted at Aston University School of Engineering and Applied Science to explore and critique the value of introducing CDIO across the first year undergraduate curriculum. Participants will be invited to consider the pedagogical and engineering related challenges of evaluating the academic and practical value of CDIO as a strategy for learning and teaching in the discipline. An empirical approach to evaluation developed by the researchers to provide empirically grounded evidence of the pedagogical and vocational value of CDIO will form the theoretical and conceptual basis of the workshop. This approach is distinctive in that it encapsulates both engineering and social science methods of evaluation. It is also contemporaneous in nature, with the researchers acting as a ‘fly on the wall’ capturing data as the programme unfolds. Through facilitated discussion and participation, the workshop will provide colleagues with the opportunity to develop a cross-disciplinary, empirically grounded research proposal specifically for the purposes of critically evaluating CDIO. It is anticipated that during the workshop, colleagues will work together in small groups. Suitable pedagogical approaches and tools will be suggested and a purposefully developed Engineering Education Research Guide, written by the workshop facilitators, will be given to all participants to inform and support the Workshop approach.

An ex ante evaluation framework for the regional benefits of publicly supported R&D projects

This paper draws on the knowledge-base implicit in ex post evaluations of publicly funded R&D and other related conceptual and empirical studies to suggest a framework for the ex ante evaluation of the regional benefits from R&D projects. The framework developed comprises two main elements: an inventory of the global private and social benefits which might result from any R&D project; and, an assessment of the share of these global benefits which might accrue to a host region, taking into account the characteristics of the R&D project and the region's innovation system. The inventory of global benefits separately identifies private and social benefits and distinguishes between increments to public and private knowledge stocks, benefits to R&D productivity and benefits from commercialisation. Potential market and 'pure' knowledge spillovers are also considered separately. The paper concludes with the application of the framework to two illustrative case studies. © 2003 Elsevier B.V. All rights reserved.

Theoretical evaluation of the cataract extraction-refraction-implantation techniques for intraocular lens power calculation

PURPOSE: To evaluate theoretically three previously published formulae that use intra-operative aphakic refractive error to calculate intraocular lens (IOL) power, not necessitating pre-operative biometry. The formulae are as follows: IOL power (D) = Aphakic refraction x 2.01 [Ianchulev et al., J. Cataract Refract. Surg.31 (2005) 1530]; IOL power (D) = Aphakic refraction x 1.75 [Mackool et al., J. Cataract Refract. Surg.32 (2006) 435]; IOL power (D) = 0.07x(2) + 1.27x + 1.22, where x = aphakic refraction [Leccisotti, Graefes Arch. Clin. Exp. Ophthalmol.246 (2008) 729]. METHODS: Gaussian first order calculations were used to determine the relationship between intra-operative aphakic refractive error and the IOL power required for emmetropia in a series of schematic eyes incorporating varying corneal powers, pre-operative crystalline lens powers, axial lengths and post-operative IOL positions. The three previously published formulae, based on empirical data, were then compared in terms of IOL power errors that arose in the same schematic eye variants. RESULTS: An inverse relationship exists between theoretical ratio and axial length. Corneal power and initial lens power have little effect on calculated ratios, whilst final IOL position has a significant impact. None of the three empirically derived formulae are universally accurate but each is able to predict IOL power precisely in certain theoretical scenarios. The formulae derived by Ianchulev et al. and Leccisotti are most accurate for posterior IOL positions, whereas the Mackool et al. formula is most reliable when the IOL is located more anteriorly. CONCLUSION: Final IOL position was found to be the chief determinant of IOL power errors. Although the A-constants of IOLs are known and may be accurate, a variety of factors can still influence the final IOL position and lead to undesirable refractive errors. Optimum results using these novel formulae would be achieved in myopic eyes.

An evaluation of task analysis techniques for industrial process control

The concept of a task is fundamental to the discipline of ergonomics. Approaches to the analysis of tasks began in the early 1900's. These approaches have evolved and developed to the present day, when there is a vast array of methods available. Some of these methods are specific to particular contexts or applications, others more general. However, whilst many of these analyses allow tasks to be examined in detail, they do not act as tools to aid the design process or the designer. The present thesis examines the use of task analysis in a process control context, and in particular the use of task analysis to specify operator information and display requirements in such systems. The first part of the thesis examines the theoretical aspect of task analysis and presents a review of the methods, issues and concepts relating to task analysis. A review of over 80 methods of task analysis was carried out to form a basis for the development of a task analysis method to specify operator information requirements in industrial process control contexts. Of the methods reviewed Hierarchical Task Analysis was selected to provide such a basis and developed to meet the criteria outlined for such a method of task analysis. The second section outlines the practical application and evolution of the developed task analysis method. Four case studies were used to examine the method in an empirical context. The case studies represent a range of plant contexts and types, both complex and more simple, batch and continuous and high risk and low risk processes. The theoretical and empirical issues are drawn together and a method developed to provide a task analysis technique to specify operator information requirements and to provide the first stages of a tool to aid the design of VDU displays for process control.

An evaluation of the effectiveness of intervention strategies for the promotion of health and safety performance in small firms

Recognition of the contribution of small firms to the UK economy has grown considerably since 1995 when this research first began. The poor record of small firms in managing health and safety effectively has caused concern, and efforts made to improve knowledge and awareness of the target group through various initiatives have had some success. This research thesis attempts to identify the range of intervention routes and methods available to reach the target group, and to consider ways of evaluating the outcome of such efforts. Various interventions were tested with small firms, including a Workshop; use of Questionnaires; short postal Reply Slip survey; leading to a closer evaluation of a specific industry- the Licensed Trade. Attitudes and beliefs of the sample were identified, and observations carried out to consider actions taken by workers and others in the workplace. These empirical research findings were used to develop the theme of Primary and Secondary interventions intended to change behaviours, and to confirm assumptions about what small firms currently do to manage health and safety risks. Guidance for small firms was developed as a Secondary intervention tool to support Primary interventions, such as inspection or insurance provision.

Integrated strategic supply chain positioning for SME's:an empirical study

Purpose – The purpose of this paper is to report on an investigation into the selection and evaluation of a suitable strategic positioning methodology for SMEs in Singapore. Design/methodology/approach – The research methodology is based on critical review of the literature to identify the potentially most suitable strategic positioning methodology, evaluation and testing of the methodology within the context of SME's in Singapore, and analysis to determine the strengths and weaknesses of the methodology and opportunities for further research. Findings – This paper illustrates a leading integrated strategic positioning decision making process, which has been found to be potentially suitable for SMEs in Singapore, and the process is then applied and evaluated in two industrial case studies. Results in the form of strengths, weaknesses and opportunities are evaluated and discussed in detail, and further research to improve the process has been identified. Practical implications – A practical and integrated strategic supply chain positioning methodology for SMEs to define their own competitive space, among other companies in the manufacturing supply chain, so as to maximize business competitiveness. Originality/value – This paper contributes to the knowledge of the strategic positioning decision process as well as identifies further research to adapt the process for SMEs in Singapore.

Strategic supplier performance evaluation:a case-based action research of a UK manufacturing organisation

The main aim of this research is to demonstrate strategic supplier performance evaluation of a UK-based manufacturing organisation using an integrated analytical framework. Developing long term relationship with strategic suppliers is common in today's industry. However, monitoring suppliers' performance all through the contractual period is important in order to ensure overall supply chain performance. Therefore, client organisations need to measure suppliers' performance dynamically and inform them on improvement measures. Although there are many studies introducing innovative supplier performance evaluation frameworks and empirical researches on identifying criteria for supplier evaluation, little has been reported on detailed application of strategic supplier performance evaluation and its implication on overall performance of organisation. Additionally, majority of the prior studies emphasise on lagging factors (quality, delivery schedule and value/cost) for supplier selection and evaluation. This research proposes both leading (organisational practices, risk management, environmental and social practices) and lagging factors for supplier evaluation and demonstrates a systematic method for identifying those factors with the involvement of relevant stakeholders and process mapping. The contribution of this article is a real-life case-based action research utilising an integrated analytical model that combines quality function deployment and the analytic hierarchy process method for suppliers' performance evaluation. The effectiveness of the method has been demonstrated through number of validations (e.g. focus group, business results, and statistical analysis). Additionally, the study reveals that enhanced supplier performance results positive impact on operational and business performance of client organisation.