Addressing the project implementation challenges in the Saudi Arabian power supply industry: an investigative approach towards improving project delivery

For many decades, the Kingdom of Saudi Arabia has been widely known for being a reliable oil exporter. This fact, however, has not exempted it from facing significant domestic energy challenges. One of the most pressing of these challenges involves bridging the widening electricity supply-demand gap where, currently, the demand is growing at a very fast rate. One crucial means to address this challenge is through delivering power supply projects with maximum efficiency. Project delivery delay, however, is not uncommon in this highly capital-intensive industry, indicating electricity supplies are not coping with the demand increases. To provide a deeper insight into the challenges of project implementation and efficient practice, this research adopts a pragmatic approach by triangulating literature, questionnaires and semi-structured interviews. The research was conducted in the Saudi Arabian power supply industry – Western Operating Area. A total of 105 usable questionnaires were collected, and 28 recorded, semi-structured interviews were conducted, analysed and synthesised to produce a conceptual model of what constitutes the project implementation challenges in the investigated industry. This was achieved by conducting a comprehensive ranking analysis applied to all 58 identified and surveyed factors which, according to project practitioners in the investigated industry, contribute to project delay. 28 of these project delay factors were selected as the "most important" ones. Factor Analysis was employed to structure these 28 most important project delay factors into the following meaningful set of 7 project implementation challenges: Saudi Electricity Company's contractual commitments, Saudi Electricity Company's communication and coordination effectiveness, contractors' project planning and project control effectiveness, consultant-related aspects, manpower challenges and material uncertainties, Saudi Electricity Company's tendering system, and lack of project requirements clarity. The study has implications for industry policy in that it provides a coherent assessment of the key project stakeholders' central problems. From this analysis, pragmatic recommendations are proposed that, if enacted, will minimise the significance of the identified problems on future project outcomes, thus helping to ensure the electricity supply-demand gap is diminished.

Orthodoxy and the Cold War:religion and political power in Romania, 1947-65

This book examines the unique dynamics between Orthodoxy and politics in Romania. It provides an accessible narrative on church-state relations in the early Cold War period within a wider timeframe, from the establishment of the state in 1859 to the rise of Nicolae Ceausescu in 1965. In the 1950s Romania began to distance itself from Moscow's influence, developing its own form of communism. Based on new archival resources, the book argues that Romanian national communism, outside Moscow's influence, had an ally in a strong Church. It addresses the following questions: How did the Church, which openly opposed communism in the interwar period, survive the atheist regime? How did the regime use religion to its political advantage? What was the Church's influence on Romanian politics? The book analyses the political interests of the Romanian Orthodox Church and its religious diplomacy with actors in the West, in particular with the Church of England.

From apartheid to unity: white capital and black power in the racial integration of South African football, 1976-1992

This article analyses the complex process that deracialised and democratised South African football between the early 1970s and 1990s. Based mainly on archival documents, it argues that growing isolation from world sport, exemplified by South Africa's expulsion from the Olympic movement in 1970 and FIFA in 1976, and the reinvigoration of the liberation struggle with the Soweto youth uprising triggered a process of gradual desegregation in the South African professional game. While Pretoria viewed such changes as a potential bulwark against rising black militancy, white football and big business had their own reasons for eventually supporting racial integration, as seen in the founding of the National Soccer League. As negotiations for a new democratic South Africa began in earnest between the African National Congress (ANC) and the National Party (NP) in the latter half of the 1980s, transformations in football and politics paralleled and informed each other. Previously antagonistic football associations began a series of 'unity talks' between 1985 and 1986 that eventually culminated in the formation of a single, non-racial South African Football Association in December 1991, just a few days before the Convention for a Democratic South Africa (CODESA) opened the process of writing a new post-apartheid constitution. Finally, three decades of isolation came to an end as FIFA welcomed South Africa back into world football in 1992 - a powerful example of the seemingly boundless potential of a liberated and united South Africa ahead of the first democratic elections in 1994.

Sample size estimation and statistical power analyses

The concept of sample size and statistical power estimation is now something that Optometrists that want to perform research, whether it be in practice or in an academic institution, cannot simply hide away from. Ethics committees, journal editors and grant awarding bodies are now increasingly requesting that all research be backed up with sample size and statistical power estimation in order to justify any study and its findings. This article presents a step-by-step guide of the process for determining sample sizeand statistical power. It builds on statistical concepts presented in earlier articles in Optometry Today by Richard Armstrong and Frank Eperjesi.

Apparatus and test methods for measuring the impact of golf balls on turf and their application in the field

An apparatus was developed to project spinning golf balls directly onto golf greens. This employed a modified baseball/practice machine with two counter-rotating pneumatic wheels. The speed of the wheels could be varied independently allowing backspin to be given to the ball. The ball was projected into a darkened enclosure where the motion of the ball before and after impacting with the turf was recorded using a still camera and a stroboscope. The resulting photographs contained successive images of the ball on a single frame of film. The apparatus was tested on eighteen golf courses resulting in 721 photographs of impacts. Statistical analysis was carried out on the results of the photographs and from this, two types of green emerged. On the first, the ball tended to rebound with topspin, while on the second, the ball retained backspin after impact if the initial backspin was greater than about 350 rads-1. Eleven tests were devised to determine the characteristics of greens and statistical techniques were used to analyse the relationships between these tests. These showed the effects of the green characteristics on ball/turf impacts. It was found that the ball retained backspin on greens that were freely drained and had less than 60% of Poa annua (annual meadow grass) in their swards. Visco-elastic models were used to simulate the impact of the ball with the turf. Impacts were simulated by considering the ball to be rigid and the turf to be a two layered system consisting of springs and dampers. The model showed good agreement with experiment and was used to simulate impacts from two different shots onto two contrasting types of green.

Risk and uncertainty in supply markets and sustainability-related innovation

tentially valuable innovations. In energy policy, much attention is given to analysing and incentivising customer demand, but new technologies also need new supply markets, to provide products and services to build, operate and maintain the innovative technology. This paper addresses the impact of supply constraints on the long-term viability of sustainability related innovations, using the case of energy from waste (EfW). Uncertainties in the pricing and availability of feedstock (i.e. waste) deter potential investors in EfW projects. We draw on prior supply management research to conceptualise the problem, and identify what steps might be taken to address it. Based on this analysis, we propose a research agenda aimed at purchasing and supply scholars and centred on the need to understand better how markets evolve and how stakeholders can (legitimately) influence the evolution of supply markets to support the adoption of sustainability related innovation. Within this broad case, specific themes are recommended for further investigation.

The rhetoric and reality of supply chain management in Irish business

A strong focus of NITL’s research activity is on monitoring the extent to which SCM principles and concepts are adopted by organisations based in Ireland. For more than a decade this work has aimed to develop a profile of SCM adoption, as well as identifying some of the critical success factors and barriers influencing firms in their attempts to improve supply chain capability and performance. This article explains the role of SCM in Ireland’s economic recovery and provides an overview of NITL’s latest findings in relation to the adoption of SCM practices by firms in Ireland.

Hybrid gain-flattened and reduced power excursion scheme for distributed Raman amplification

We propose and evaluate through extensive numerical modelling a novel distributed hybrid amplification scheme combining first and second-order Raman pumping which gives reduced signal power excursion over a wide spatial-spectral range of 60 km × 80 nm in C + L-bands. © 2013 Optical Society of America.

Developing an enterprise simulator to support electronic supply chain for B2B electronic process

The application of any e-Solution promises significant returns. In particular, using internet technologies both within enterprises and across the supply (value) chain provides real opportunity, not only for operational improvement but also for innovative strategic positioning. However, significant questions obscure potential investment; how any value will actually be created and, importantly, how this value will be shared across the value chain is not clear. This paper will describe a programme of research that is developing an enterprise simulator that will provide a more fundamental understanding of the impact of e-Solutions across operational supply chains, in terms of both standard operational and financial measures of performance. An efficient supply chain reduces total costs of operations by sharing accurate real-time information and coordinating inter-organizational business processes. This form of electronic link between organizations is known as business-to-business (B2B) e-Business. The financial measures go beyond simple cost calculations to real bottom-line performance by modelling the financial transactions that business processes generate. The paper will show how this enterprise simulator allows for a complete supply chain to be modelled in this way across four key applications: control system design, virtual enterprises, pan-supply-chain performance metrics and supporting e-Supply-chain design methodology.

Managing imbalanced supply chain relationships for sustainability:a power perspective

This study adopts a power perspective to investigate sustainable supply chain relationships and specifically uses resource-dependence theory (RDT) to critically analyze buyer-supplier-supplier relationships. Empirical evidence is provided, extending the RDT model in this context. The concept of power relationships is explored through a qualitative study of a multinational company and agricultural growers in the UK food industry that work together to implement sustainable practices. We look at multiple triadic relationships involving a large buyer and its small suppliers to investigate how relative power affects the implementation of sustainable supply-management practices. The study highlights that power as dependence is relevant to understanding compliance in sustainable supply chains and to identifying appropriate relationship-management strategies to build more sustainable supply chains. We show the influences of power on how players manage their relationships and how it affects organizational responses to the implementation of sustainability initiatives. Power notably influences the sharing of sustainability-related risks and value between supply chain partners. From a managerial perspective, the study contributes to developing a better understanding of how power can become an effective way to achieve sustainability goals. This article offers insights into the way in which a large organization works with small and medium size enterprises to implement sustainable practices and shows how power management-that is, the way in which power is used-can support or hinder effective cooperation around sustainability in the supply chain. © 2014 Decision Sciences Institute.

Designing a support system for aerospace maintenance supply chains

Purpose - To develop a systems strategy for supply chain management in aerospace maintenance, repair and overhaul (MRO). Design/methodology/approach - A standard systems development methodology has been followed to produce a process model (i.e. the AMSCR model); an information model (i.e. business rules) and a computerised information management capability (i.e. automated optimisation). Findings - The proof of concept for this web-based MRO supply chain system has been established through collaboration with a sample of the different types of supply chain members. The proven benefits comprise new potential to minimise the stock holding costs of the whole supply chain whilst also minimising non-flying time of the aircraft that the supply chain supports. Research limitations/implications - The scale of change needed to successfully model and automate the supply chain is vast. This research is a limited-scale experiment intended to show the power of process analysis and automation, coupled with strategic use of management science techniques, to derive tangible business benefit. Practical implications - This type of system is now vital in an industry that has continuously decreasing profit margins; which in turn means pressure to reduce servicing times and increase the mean time between them. Originality/value - Original work has been conducted at several levels: process, information and automation. The proof-of-concept system has been applied to an aircraft MRO supply chain. This is an area of research that has been neglected, and as a result is not well served by current systems solutions. © Emerald Group Publishing Limited.