Multiculturalism- the ideological response to the education of black pupils in British Schools

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

Selection and education of patients for inhaled insulin

Inhaled insulin is a recent advance in insulin delivery that promises to be an effective alternative to subcutaneous insulin. Several insulin delivery systems are currently in development and the first of these has been approved for clinical use. Inhaled insulin offers greater flexibility and convenience for patients with diabetes and may be particularly useful in those who are reluctant to initiate or intensify insulin treatment. Although promising, potential concerns remain regarding its long-term effects on lungs. Also, excluding certain groups of patients such as smokers and those with respiratory illnesses will restrict its use at present. Lack of familiarity with the technology, especially relating to dose adjustments and inhaler device, is also likely to present fresh challenges. But, careful selection of patients, education, and continued support from health professionals is vital to ensure success with this new technology.

Experiences of families living in Kingshurst, North Solihull

This report sets out findings of a rapid-ethnographic research project commissioned by The Children’s Society and conducted by a research team from Aston University into the experiences of families living in Kingshurst – a neighbourhood within the metropolitan borough of Solihull in the West Midlands.

Adapting an apprenticeship model to the needs of English-medium education at the tertiary level in Turkey

Despite the difficulties that we have regarding the use of English in tertiary education in Turkey, we argue that it is necessary for those involved to study in the medium of English. Furthermore, significant advances have been made on this front. These efforts have been for the most part language-oriented, but also include research into needs analysis and the pedagogy of team-teaching. Considering the current situation at this level of education, however, there still seems to be more to do. And the question is, what more can we do? What further contribution can we make? Or, how can we take this process further? The purpose of the study reported here is to respond to this last question. We test the proposition that it is possible to take this process further by investigating the efficient management of transition from Turkish-medium to English-medium at the tertiary level of education in Turkey. Beyond what is achieved by only the language orientation of the EAP approach, and moving conceptually deeper than what has been achieved by the team-teaching approach, the research undertaken for the purpose of this study focuses on the idea of the discourse community that people want to belong to. It then pursues an adaptation of the essentially psycho-social approach of apprenticeship, as people become aspirants and apprentices to that discourse community. In this thesis, the researcher recognises that she cannot follow all the way through to the full implementation of her ideas in a fully-taught course. She is not in a position to change the education system. What she does here is to introduce a concept and sample its effects in terms of motivation, and thereby of integration and of success, for individuals and groups of learners. Evaluation is provided by acquiring both qualitative and quantitative data concerning mature members' perceptions of apprenticed-neophytes functioning as members in the new community, apprenticed-neophytes' perceptions of their own membership and of the preparation process undertaken, and the comparison of these neophytes' performance with that of other neophytes in the community. The data obtained provide strong evidence in support of the potential usefulness of this apprenticeship model towards the declared purpose of improving the English-medium tertiary education of Turkish students in their chosen fields of study.

Envisioning innovation : the communication of technological change through graphic representation

Graphic depiction is an established method for academics to present concepts about theories of innovation. These expressions have been adopted by policy-makers, the media and businesses. However, there has been little research on the extent of their usage or effectiveness ex-academia. In addition, innovation theorists have ignored this area of study, despite the communication of information about innovation being acknowledged as a major determinant of success for corporate enterprise. The thesis explores some major themes in the theories of innovation and compares how graphics are used to represent them. The thesis examines the contribution of visual sociology and graphic theory to an investigation of a sample of graphics. The methodological focus is a modified content analysis. The following expressions are explored: check lists, matrices, maps and mapping in the management of innovation; models, flow charts, organisational charts and networks in the innovation process; and curves and cycles in the representation of performance and progress. The main conclusion is that academia is leading the way in usage as well as novelty. The graphic message is switching from prescription to description. The computerisation of graphics has created a major role for the information designer. It is recommended that use of the graphic representation of innovation should be increased in all domains, though it is conceded that its content and execution need to improve, too. Education of graphic 'producers', 'intermediaries' and 'consumers' will play a part in this, as will greater exploration of diversity, novelty and convention. Work has begun to tackle this and suggestions for future research are made.

The genius of Erasmus Darwin

The Genius of Erasmus Darwin provides insight into the full extent of Erasmus Darwin's exceptional intellect. He is shown to be a major creative thinker and innovator, one of the minds behind the late eighteenth-century industrial revolution, and one of the first, if not the first, to perceive the living world (including humans) as part of a unified evolutionary scenario. The contributions here provide contextual understandings of Erasmus Darwin's thought, as well as studies of particular works and accounts of the later reception of his writings. In this way it is possible to see why the young Samuel Taylor Coleridge was moved to describe Darwin as 'the first literary character in Europe, and the most original-minded man'. Erasmus Darwin, Charles Darwin's grandfather, was one of the leading intellectuals of eighteenth-century England. He was a man with an extraordinary range of interests and activities: he was a doctor, biologist, inventor, poet, linguist, and botanist. He was also a founding member of the Lunar Society, an intellectual community that included such eminent men as James Watt and Josiah Wedgwood. Contents: Introduction; Setting the scene, Jonathan Powers; Prologue 'Catching up with Erasmus Darwin in the New Century', Desmond King-Hele. Section 1: Medicine: Physicians and physic in 17th and 18th century Lichfield, Dennis Gibbs; Dr Erasmus Darwin MD FRS (1731–1802): England's greatest physician?, Gordon Cook; William Pale (1743–1805) and James Parkinson (1755–1824): two peri-Erasmatic thinkers (and several others), Christopher Gardner-Thorpe; The vertiginous philosophers: Erasmus Darwin and William Charles Wells on vertigo, Nicholas Wade. Section 2: Biology: The Antipodes and Erasmus Darwin: the place of Erasmus Darwin in the heritage of Australian literature and biology, John Pearn; Erasmus Darwin on human reproductive generation: placing heredity within historical and Zoonomian contexts, Philip Wilson; All from fibres: Erasmus Darwin's evolutionary psychobiology, C.U.M. Smith; Two special doctors: Erasmus Darwin and Luigi Galvani, Rafaella Simili. Section 3: Education: But what about the women? The lunar society's attitude to women and science and to the education of girls, Jenny Uglow; The Derbyshire 'Darwinians': the persistence of Erasmus Darwin's influence on a British provincial literary and scientific community, c.1780–1850, Paul Elliot. Section 4: Technology: Designing better steering for carriages (and cars); with a glance at other inventions, Desmond King-Hele; Mama and papa: the ancestors of modern-day speech science, Philip Jackson; Negative and positive images: Erasmus Darwin, Tom Wedgwood and the origins of photography, Alan Barnes; Section 5: Environment: Erasmus Darwin's contributions to the geological sciences, Hugh Torrens; The air man, Desmond King-Hele; Erasmus Darwin, work and health, Tim Carter; Section 6: Literature: The progress of society: Darwin's early drafts for the temple of nature, Martin Priestman; The poet as pathologist: myth and medicine in Erasmus Darwin's epic poetry, Stuart Harris; 'Another and the same': nature and human beings in Erasmus Darwin's doctrines of love and imagination, Maurizio Valsania. Epilogue: 'One great slaughter-house the warring world': living in revolutionary times, David Knight; Coda: Midlands memorabilia, Nick Redman; Appendix: The Creation of the Erasmus Darwin Foundation and Erasmus Darwin House, Tony Barnard; Index.

Use of computational fluid dynamics in the design of bubble column reactors

Investigations into the modelling techniques that depict the transport of discrete phases (gas bubbles or solid particles) and model biochemical reactions in a bubble column reactor are discussed here. The mixture model was used to calculate gas-liquid, solid-liquid and gasliquid-solid interactions. Multiphase flow is a difficult phenomenon to capture, particularly in bubble columns where the major driving force is caused by the injection of gas bubbles. The gas bubbles cause a large density difference to occur that results in transient multi-dimensional fluid motion. Standard design procedures do not account for the transient motion, due to the simplifying assumptions of steady plug flow. Computational fluid dynamics (CFD) can assist in expanding the understanding of complex flows in bubble columns by characterising the flow phenomena for many geometrical configurations. Therefore, CFD has a role in the education of chemical and biochemical engineers, providing the examples of flow phenomena that many engineers may not experience, even through experimentation. The performance of the mixture model was investigated for three domains (plane, rectangular and cylindrical) and three flow models (laminar, k-e turbulence and the Reynolds stresses). mThis investigation raised many questions about how gas-liquid interactions are captured numerically. To answer some of these questions the analogy between thermal convection in a cavity and gas-liquid flow in bubble columns was invoked. This involved modelling the buoyant motion of air in a narrow cavity for a number of turbulence schemes. The difference in density was caused by a temperature gradient that acted across the width of the cavity. Multiple vortices were obtained when the Reynolds stresses were utilised with the addition of a basic flow profile after each time step. To implement the three-phase models an alternative mixture model was developed and compared against a commercially available mixture model for three turbulence schemes. The scheme where just the Reynolds stresses model was employed, predicted the transient motion of the fluids quite well for both mixture models. Solid-liquid and then alternative formulations of gas-liquid-solid model were compared against one another. The alternative form of the mixture model was found to perform particularly well for both gas and solid phase transport when calculating two and three-phase flow. The improvement in the solutions obtained was a result of the inclusion of the Reynolds stresses model and differences in the mixture models employed. The differences between the alternative mixture models were found in the volume fraction equation (flux and deviatoric stress tensor terms) and the viscosity formulation for the mixture phase.

An assessment of factors affecting performance and growth of new technology based firms in the UK

New Technology Based Firms (NTBF) are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of UK’s economy. This study contributes to the above literature by investigating two of the factors believed to limit the growth of such firms in the UK. The first concerns the existence of a ‘knowledge gap’ while the second the existence of a ‘financial gap’. These themes are developed along three main research lines. Firstly, based upon the human capital theory initially proposed by Backer (1964) new evidence is provided on the human capital characteristics (experience and education) of the current UK NTBF entrepreneurs. Secondly, the causal relationship between general and specific human capital (as well as their interactions) upon the company performance and growth is investigated via its traditional direct effect as well as via its indirect effect upon the access to external finance. Finally, more light is shed on the financial structure and the type of financial constraints that high-tech firms face at start-up. In particular, whether a financial gap exists is explored by distinguishing between the demand and the supply of external finance as well as by type of external source of financing. The empirical testing of the various research hypotheses has been obtained by carrying out an original survey of new technology based firms defined as independent companies, established in the past 25 years in R&D intensive sectors. The resulting dataset contains information for 412 companies on a number of general company characteristics and the characteristics of their entrepreneurs in 2004. Policy and practical implications for future and current entrepreneurs and also providers of external finance are provided.

Evaluation of public housing strategies in Mexico City : an exploratory goal programming approach

This thesis describes the development and use of a goal programming methodology for the evaluation of public housjng strategies in Mexico City, The methodology responds to the need to incorporate the location, size and densities of housing projects on the one hand, and "external" constraints such as the ability of low income families to pay for housing, and the amounts of capital and land available, on the other. The provision of low cost housing by public housing agencies in Mexico City is becoming increasingly difficult because there are so many constraints to be met and overcome, the most important of which is the ability of families to pay for housing. Other important limiting factors are the availability of capital and of land plots of the right size in desired locations. The location of public housing projects is significant because it determines the cost and pattern of work trips, which in a metropolitan area such as Mexico City are of considerable importance to both planners and potential. house owners. In addition, since the price of land is closely related to its location, the last factor is also significant in determining the price of the total housing package. Consequently there is a major trade-off between a housing strategy based on the provision of housing at locations close to employment, and the opposite one based on the provjsion of housjng at locations where employment accessibility is poorer but housing can be provided at a lower price. The goal programming evaluation methodology presented in this thesis was developed to aid housing planners to evaluate housing strategies which incorporate the issues raised above,

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.

Does human capital endowment of FDI recipient countries really matter? Evidence from cross-country firm level data

The stylized literature on foreign direct investment suggests that developing countries should invest in the human capital of their labour force in order to attract foreign direct investment. However, if educational quality in developing country is uncertain such that formal education is a noisy signal of human capital, it might be rational for multinational enterprises to focus more on job-specific training than on formal education of the labour force. Using cross-country data from the textiles and garments industry, we demonstrate that training indeed has greater impact on firm efficiency in developing countries than formal education of the work force.

Experiential learning:inspiring the business leaders of tomorrow

Purpose: The complex challenges of sustainable development and the need to embed these issues effectively into the education of future business leaders has never been more urgent. The purpose of this paper is to discuss different approaches taken by two UK signatories to the UN Principles for Responsible Management Education (PRME). Design/methodology/approach: The two approaches examined are: MSc Entrepreneurship students opting for placements with social enterprises; and MBA students undertaking workshops using "live" case studies. A content analysis of the experiences of students from their written reflective narratives is presented. This is supplemented by reflections of the facilitators and tutors. Findings: The analysis reveals that the opportunity to work with social entrepreneurs and/or "responsible" business professionals provides the business students with inspirational role models and positive social learning opportunities. Research limitations/implications: This paper suggests that experiential learning is an effective way of integrating ethics, responsibility and sustainability into the curriculum but the research draws on the experience of two schools. Further research is important to explore these findings in other contexts. Practical implications: The authors argue that direct exposure to a business culture (and/or behaviour) that is predicated upon ethical/social responsibility and sustainability is an effective means to embed these values in the curriculum. Originality/value: This paper contributes by drawing on social psychological research related to behaviour change to examine how experiential learning on traditional Business Masters programmes can provide students with the knowledge, motivation and skills to contribute positively to society, in a way that more traditional pedagogies cannot. © Emerald Group Publishing Limited.

Impact of suspected food allergy on emotional distress and family life of parents prior to allergy diagnosis

Background: Food allergy is associated with psychological distress in both child and parent. It is unknown whether parental distress is present prior to clinical diagnosis or whether experiences at clinic can reduce any distress present. This study aimed to assess anxiety and depression in parents and the impact of suspected food allergy on the lives of families before and after a visit to an allergy clinic. Methods: One hundred and twenty-four parents visiting an allergy clinic for the first time to have their child assessed for food allergy completed a study-specific questionnaire and the Hospital Anxiety and Depression Scale; 50 parents completed these 4-6 wk later in their own home. Results: Most parents (86.4%) reported suspected food allergy had an impact on their family life prior to clinic attendance; 76% had made changes to their child's diet. 32.5% of parents had mild-to-severe anxiety before their clinic visit; 17.5% had mild-to-moderate depression. Post-clinic, 40% had mild-to-severe anxiety; 13.1% had mild-to-moderate depression. There were no significant differences in anxiety (p = 0.34) or depression scores (p = 0.09) before and after the clinic visit. Conclusions: Anxiety and depression is present in a small proportion of parents prior to diagnosis of food allergy in their child and this does not reduce in the short term after the clinic visit. Identification of parents at risk of suffering from distress is needed and ways in which we communicate allergy information before and at clinic should be investigated to see if we can reduce distress. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.