A visual interactive modelling system as a learning tool

This paper presents a case study of the use of a visual interactive modelling system to investigate issues involved in the management of a hospital ward. Visual Interactive Modelling systems are seen to offer the learner the opportunity to explore operational management issues from a varied perspective and to provide an interactive system in which the learner receives feedback on the consequences of their actions. However to maximise the potential learning experience for a student requires the recognition that they require task structure which helps them to understand the concepts involved. These factors can be incorporated into the visual interactive model by providing an interface customised to guide the student through the experimentation. Recent developments of VIM systems in terms of their connectivity with the programming language Visual Basic facilitates this customisation.

Writing for success:mentoring as a pedagogical tool – a cross- institutional study

The prominent position given to academic writing across contemporary academia is reflected in the substantive literature and debate devoted to the subject over the past 30 years. However, the massification of higher education, manifested by a shift from elite to mass education, has brought the issue into the public arena, with much debate focusing on the need for ‘modern-day' students to be taught how to write academically (Bjork et al., 2003; Ganobcsik-Williams, 2006). Indeed, Russell (2003) argued that academic writing has become a global ‘problem' in Higher Education because it sits between two contradictory pressures (p.V). On one end of the university ‘experience' increasing numbers of students, many from non-traditional backgrounds, enter higher education bringing with them a range of communication abilities. At the other end, many graduates leave university to work in specialised industries where employers expect them to have high level writing skills (Ashton, 2007; Russell, 2003; Torrence et al., 1999). By drawing attention to the issues around peer mentoring within an academic writing setting in three different higher education Institutions, this paper makes an important contribution to current debates. Based upon a critical analysis of the emergent findings of an empirical study into the role of peer writing mentors in promoting student transition to higher education, the paper adopts an academic literacies approach to discuss the role of writing mentoring in promoting transition and retention by developing students' academic writing. Attention is drawn to the manner in which student expectations of writing mentoring actually align with mentoring practices - particularly in terms of the writing process and critical thinking. Other issues such as the approachability of writing mentors, the practicalities of accessing writing mentoring and the wider learning environment are also discussed.

Engineering the future:CDIO as a tool for combating retention difficulties

With the demand for engineering graduates at what may be defined as an unprecedented high, many universities find themselves facing significant levels of student attrition-with high "drop-out levels" being a major issue in engineering education. In order to address this, Aston University in the UK has radically changed its undergraduate engineering education curriculum, introducing capstone CDIO (Conceive, Design, Implement, Operate) modules for all first year students studying Mechanical Engineering and Design. The introduction of CDIO is aimed at making project / problem based learning the norm. Utilising this approach, the learning and teaching in engineering purposefully aims to promote innovative thinking, thus equipping students with high-level problem-solving skills in a way that builds on theory whilst enhancing practical competencies and abilities. This chapter provides an overview of an Action Research study undertaken contemporaneously with the development, introduction, and administration of the first two semesters of CDIO. It identifies the challenges and benefits of the approach and concludes by arguing that whilst CDIO is hard work for staff, it can make a real difference to students' learning experiences, thereby positively impacting retention. © 2012, IGI Global.

Designing and implementing a blended learning approach to executive SCM education:a case study from Ireland

The National Institute for Transport and Logistics (NITL) is Ireland’s centre of excellence for supply chain management (SCM). As part of its mission to promote the development of supply chain expertise in Irish business, it designs and delivers executive modular learning programmes. In 2004, as part of a drive to create more flexible learning opportunities for course participants, NITL designed and implemented an eLearning programme, which involved converting traditionally tutored modules to online modules. This paper describes the rationale behind this initiative and the significance of technology as an enabling tool for executive education, as well as detailing the design and implementation processes for the pilot module. The paper concludes with a critique of the expected and actual benefits realised, as well as future development considerations.

"We don't need no education" - Or do we? Management education and alumni adoption of strategy tools

Despite concerns about the relevance of management education, there is relatively little evidence about whether graduates use the management tools and concepts they are taught. We address this gap with evidence from a survey of business school alumni adoption of tools typically taught in strategic management courses. Our findings show that four educational characteristics-level of formal education, frequency of management training, specificity of strategic management education, and time elapsed since formal education-drive adoption of strategy tools. Specifically, features such as postgraduate over undergraduate qualifications and frequent exposure to management training predispose greater user of strategy tools. However, other factors, such as time elapsed since formal education, are not as great a predictor of variation in use. We conclude with a predictive model of the relative weight and importance of educational and demographic characteristics on strategy tool adoption and discuss our findings in light of the relevance debate. © The Author(s) 2013.

Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

Use of Google as a tool to aid diagnosis by optometry students

Background: Previous work has shown that medical problems can be diagnosed by practitioners using Google. The aim of this study was to determine whether optometry students would benefit from using Google when diagnosing eye diseases. Methods: Participants were given symptoms and signs and instructed to list three key words and use them to search Aston University e-Library and Google UK. Results: Aston University e-Library only search resulted in correct diagnosis in 16 of 60 simulated cases. Aston e-Library plus Google search resulted in correct diagnosis in 31 of 60 simulated cases. Conclusion: Google is a useful aid to help optometry students improve their success rate when diagnosing eye conditions.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

The strengths, weaknesses, opportunities and threats of using social software in higher and further education teaching and learning

Social software is increasingly being used in higher and further education to support teaching and learning processes. These applications provide students with social and cognitive stimulation and also add to the interaction between students and educators. However, in addition to the benefits the introduction of social software into a course environment can also have adverse implications on students, educators and the education institution as a whole, a phenomenon which has received much less attention in the literature. In this study we explore the various implications of introducing social software into a course environment in order to identify the associated benefits, but also the potential drawbacks. We draw on data from 20 social software initiatives in UK based higher and further education institutions to identify the diverse experiences and concerns of students and educators. The findings are presented in form of a SWOT analysis, which allows us to better understand the otherwise ambiguous implications of social software in terms of its strengths, weaknesses, opportunities and threats. From the analysis we have derived concrete recommendations for the use of social software as a teaching and learning tool.