A techno-economic study of the recycling of mixed plastics to useful products

The techno-economic implications of recycling the components of mixed plastics waste have been studied in a two-part investigation: (a) An economic survey of the prospects for plastics recycling, the plastics waste arisings from retailing, building, automotive, light engineering and chemical industries have been surveyed by mans of questionnaires and interviews. This was partially successful and indicated that very considerable quantities of relatively clean plastics packaging was available in major department chains and household stores. The possibility of devising collection systems for such sources, which do not lead to any extra cost, have been suggested. However, the household collection of plastics waste has been found to be uneconomic due to high cost of collection, transportation and lack of markets for the end products. (b) In a technical study of blends of PE/PP and PE/PS which are found in admixture in waste plastics, it has been shown that they exhibit poor mechanical properties due to incompatibility. Consequently reprocessing of such unsegregated blends results in products of little technological value. The inclusion of some commercial block and graft copolymers which behave as solid phase dispersants (SPES) increase the toughness of the blends (e.g. EPDM in PE/PP blend and SBS in PE/PS blend). Also, EPDM is found to be very effective for improving the toughness of single component polypropylene. However, the improved Technical properties of such blends have been accompanied by a fast rate of photo-oxidation and loss of toughness due to the presence of unsaturation in SPD's. The change in mechanical properties occurring during oven ageing and ultra-violet light accelerated weathering of these binary and ternary blends was followed by a viscoelastonetric technique (Rheovibron) over 9,, wide range of temperatures, impact resistance at room temperature (20-41'G) and changes in functional groups (i.e. carbonyl and trans-1,4-polybutadiene). Also the heat and light stability of single and mixed plastics to which thiol antioxidants were bound to SPE1 segment have been studied and compared with conventional antioxidants. The long-term performance of the mixed plastics containing SPE1 have been improved significantly by the use of conventional and bound antioxidants. It is concluded that an estimated amount of 30000 tonnes/year of plastics waste is available from department chains and household stores which can be converted to useful end products. This justifies pilot-experiments in collaboration with supermarkets, recyclers and converters by use of low cost SPD's and additives designed to make the materials more compatible.

Solar PV-powered SRM drive for EVs with flexible energy control functions

Electric vehicles (EVs) provide a feasible solution to reducing greenhouse gas emissions and thus become a hot topic for research and development. Switched reluctance motors (SRMs) are one of promised motors for EV applications. In order to extend the EVs’ driving miles, the use of photovoltaic (PV) panels on the vehicle helps decrease the reliance on vehicle batteries. Based on phase winding characteristics of SRMs, a tri-port converter is proposed in this paper to control the energy flow between the PV panel, battery and SRM. Six operating modes are presented, four of which are developed for driving and two for standstill on-board charging. In the driving modes, the energy decoupling control for maximum power point tracking (MPPT) of the PV panel and speed control of the SRM are realized. In the standstill charging modes, a grid-connected charging topology is developed without a need for external hardware. When the PV panel directly charges the battery, a multi-section charging control strategy is used to optimize energy utilization. Simulation results based on Matlab/Simulink and experiments prove the effectiveness of the proposed tri-port converter, which has potential economic implications to improve the market acceptance of EVs.

Flexible fault-tolerant topology for switched reluctance motor drives

Switched reluctance motor (SRM) drives are one competitive technology for traction motor drives. This paper proposes a novel and flexible SRM fault-tolerant topology with fault diagnosis, fault tolerance, and advanced control functions. The converter is composed of a single-phase bridge and a relay network, based on the traditional asymmetrical half-bridge driving topology. When the SRM-driving system is subjected to fault conditions including open-circuit and short-circuit faults, the proposed converter starts its fault-diagnosis procedure to locate the fault. Based on the relay network, the faulty part can be bypassed by the single-phase bridge arm, while the single-phase bridge arm and the healthy part of the converter can form a fault-tolerant topology to sustain the driving operation. A fault-tolerant control strategy is developed to decrease the influence of the fault. Furthermore, the proposed fault-tolerant strategy can be applied to three-phase 12/8 SRM and four-phase 8/6 SRM. Simulation results in MATLAB/Simulink and experiments on a three-phase 12/8 SRM and a four-phase 8/6 SRM validate the effectiveness of the proposed strategy, which may have significant economic implications in traction drive systems.

Real-time temperature estimation for power MOSFETs considering thermal ageing effects

This paper presents a novel real-time power-device temperature estimation method that monitors the power MOSFET's junction temperature shift arising from thermal aging effects and incorporates the updated electrothermal models of power modules into digital controllers. Currently, the real-time estimator is emerging as an important tool for active control of device junction temperature as well as online health monitoring for power electronic systems, but its thermal model fails to address the device's ongoing degradation. Because of a mismatch of coefficients of thermal expansion between layers of power devices, repetitive thermal cycling will cause cracks, voids, and even delamination within the device components, particularly in the solder and thermal grease layers. Consequently, the thermal resistance of power devices will increase, making it possible to use thermal resistance (and junction temperature) as key indicators for condition monitoring and control purposes. In this paper, the predicted device temperature via threshold voltage measurements is compared with the real-time estimated ones, and the difference is attributed to the aging of the device. The thermal models in digital controllers are frequently updated to correct the shift caused by thermal aging effects. Experimental results on three power MOSFETs confirm that the proposed methodologies are effective to incorporate the thermal aging effects in the power-device temperature estimator with good accuracy. The developed adaptive technologies can be applied to other power devices such as IGBTs and SiC MOSFETs, and have significant economic implications.

New SR drive with integrated charging capacity for plug-in hybrid electric vehicles (PHEVs)

Plug-in hybrid electric vehicles (PHEVs) provide much promise in reducing greenhouse gas emissions and, thus, are a focal point of research and development. Existing on-board charging capacity is effective but requires the use of several power conversion devices and power converters, which reduce reliability and cost efficiency. This paper presents a novel three-phase switched reluctance (SR) motor drive with integrated charging functions (including internal combustion engine and grid charging). The electrical energy flow within the drivetrain is controlled by a power electronic converter with less power switching devices and magnetic devices. It allows the desired energy conversion between the engine generator, the battery, and the SR motor under different operation modes. Battery-charging techniques are developed to operate under both motor-driving mode and standstill-charging mode. During the magnetization mode, the machine's phase windings are energized by the dc-link voltage. The power converter and the machine phase windings are controlled with a three-phase relay to enable the use of the ac-dc rectifier. The power converter can work as a buck-boost-type or a buck-type dc-dc converter for charging the battery. Simulation results in MATLAB/Simulink and experiments on a 3-kW SR motor validate the effectiveness of the proposed technologies, which may have significant economic implications and improve the PHEVs' market acceptance.

China's economic co-operation related investment:an investigation of its direction and some implications for outward investment

Chinese firms undertake large scale contracted projects in a number of countries under the auspices of economic cooperation. While there are suggestions that these activities are an extension of China's soft power aimed at facilitating Chinese foreign direct investment (FDI) in those countries, often for access to natural resources, there is no systematic analysis of this in the literature. In this paper, we examine China's economic cooperation related investment (ECI) over time. Our results suggest that the pattern of investment is indeed explained well by factors that are used in the stylised literature to explain directional patterns of outward FDI. They also demonstrate that the (positive) relationship between Chinese ECI and the recipient countries' natural resource richness is not economically meaningful. Finally, while there is some support for the popular wisdom that China is willing to do business with countries with weak political rights, the evidence suggests that, ceteris paribus, its ECI is more likely to flow to countries with low corruption levels and, by extension, better institutions.

FDI and the labour market: a review of the evidence and policy implications

This paper presents a series of results concerning the labour-market impact of inward foreign direct investment (FDI) in the UK. The paper demonstrates that one of the crucial impacts of FDI is to increase wage inequality and the use of relatively more skilled labour in the domestic firms. This result is found to be a combination of two effects. First, the entry by a multinational enterprise (MNE) increases the demand for skilled workers in an industry or region, thus increasing wage inequality. Second, technology spillovers occur from foreign to domestic firms. As a result of these spillovers, relative demand for skilled workers increases in the domestic firms, further contributing to aggregate wage inequality and skill upgrading. The paper also considers how FDI impacts upon skill shares by productivity differentials between foreign and domestic firms. Finally, the policy implications of this are discussed, from the perspective of regional development, and the likely effectiveness of attracting FDI to reduce structural unemployment.

Time series analysis in the assessment of ICT impact at the aggregate level – lessons and implications for the new economy

The major role of information and communication technology (ICT) in the new economy is well documented: countries worldwide are pouring resources into their ICT infrastructure despite the widely acknowledged “productivity paradox”. Evaluating the contribution of ICT investments has become an elusive but important goal of IS researchers and economists. But this area of research is fraught with complexity and we have used Solow's Residual together with time-series analysis tools to overcome some methodological inadequacies of previous studies. Using this approach, we conduct a study of 20 countries to determine if there was empirical evidence to support claims that ICT investments are worthwhile. The results show that ICT contributes to economic growth in many developed countries and newly industrialized economies (NIEs), but not in developing countries. We finally suggest ICT-complementary factors, in an attempt to rectify possible flaws in ICT policies as a contribution towards improvement in global productivity.

Personal uses and perceived social and economic effects of advertising in Bulgaria and Romania

Purpose - The objective of this paper is to uncover the underlying dimensions of, and examine the similarities and differences in, personal uses of advertising, perceived socio-economic effects of advertising, and consumer beliefs and attitudes toward advertising in Bulgaria and Romania. Moreover, it aims to identify the relative importance of the predictors of attitudes toward advertising in the two countries. Design/methodology/approach - The paper draws upon findings of previous research and theoretical developments by Bauer and Greyser, Sandage and Leckenby, and Pollay and Mittal. The study uses a stratified random sample of 947 face-to-face interviews with adult respondents from major urban areas in Bulgaria (507) and Romania (440). Variables are measured on multi-item scales as a typical application of the reflective indicator model. Findings - Results show that there are significant differences between Romanian and Bulgarian respondents in terms of their attitudes toward advertising. Romanians are more positive about advertising as an institution than the instruments of advertising. Romanians seem to accept the role of advertising in a free market economy, but have less confidence in advertising claims and techniques. Bulgarian respondents seem more sceptical toward advertising in general and are less enthusiastic about embracing the role of advertising as an institution. Moreover, Bulgarians are highly negative towards the instruments advertising uses to convey its messages to consumers. Research limitations/implications - The research findings reflect the views of urban dwellers and may not be generalisable to the wider population of the two countries. Interviewer bias was reduced by eliminating verbal or non-verbal cues to the respondents, and by the use of stratified random sampling. Practical implications - The paper suggests that the regulatory role of codes of advertising practice and industry regulating bodies should be enhanced, and their ability to protect consumers enforced. Marketing campaigns should be more inclusive to involve diverse social groups and reflect generally-accepted social norms. Originality/value - This study reveals that, while general attitudes toward advertising may be similar, attitudes toward the institution and instruments of advertising may differ even in countries with geographic proximity and low cultural distance. © Emerald Group Publishing Limited.

Control, accounting and value-for-money implications of utility regulation:a literature review

This paper reviews and evaluates the literature concerning the privatisation and regulation of the utility industries in the UK. The economic theories behind and political reasons for the programme are considered to give the reader an appreciation of the environment from which these organisations were born and the implications for their continued existence. Once this has been established the paper then considers the role that accounting has played and will continue to play in these industries. This includes consideration of the technical questions which these new organisations are asking and also the role that accounting has in the organisational structure and culture. It draws as a conclusion that these recently privatised industries provide a unique and rich source for further accounting research.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Exits, entrances and entrepreneurship : an exploration of economic theories of entrepreneurship through new independent entry and infant exit

The thesis began as a study of new firm formation. Preliminary research suggested that infant death rate was considered to be a closely related problem and the search was for a theory of new firm formation which would explain both. The thesis finds theories of exit and entry inadequate in this respect and focusses instead on theories of entrepreneurship, particularly those which concentrate on entrepreneurship as an agent of change. The role of information is found to be fundamental to economic change and an understanding of information generation and dissemination and the nature and direction of information flows is postulated to lead coterminously to an understanding of entrepreneurhsip and economic change. The economics of information is applied to theories of entrepreneurhsip and some testable hypotheses are derived. The testing relies on etablishing and measuring the information bases of the founders of new firms and then testing for certain hypothesised differences between the information bases of survivors and non-survivors. No theory of entrepreneurship is likely to be straightforwardly testable and many postulates have to be established to bring the theory to a testable stage. A questionnaire is used to gather information from a sample of firms taken from a new micro-data set established as part of the work of the thesis. Discriminant Analysis establishes the variables which best distinguish between survivors and non-survivors. The variables which emerge as important discriminators are consistent with the theory which the analysis is testing. While there are alternative interpretations of the important variables, collective consistency with the theory under test is established. The thesis concludes with an examination of the implications of the theory for policy towards stimulating new firm formation.

Ethnic groups as market segments: implications of the demand structure

Ethnic market potential in Britain has not yet been thoroughly researched. Important recent trends have focused mainly on the affective and emotional aspects of ethnicity, and included deliberations on the emergence of a revitalised neo-ethnic consciousness; its identification; politicisation, and the impact on it; of a rising third-world consciousness. This investigation attempts to take cognizance of the consuner demand of the ethnic Asian and West Indian groups, as specific market segments. It discusses the rationale for ethnic segmentation on the underlying premise, that the starting point for all product marketing is a response to perceived market opportunities. On the basis of this approach, the UK laundry detergent and automobile markets were investigated; as being representative of product categories constitutirg extremes along the purchase-search-time continuun in consuner decision-making. Ethnic groups were further analysed for their retail patronage patterns; media usage, and the differential effectiveness of alternative advertisirg strategies. The basic technique of marketing research namely the sample survey, was used with the aim of applying scientific techniques in obtaining information on ethnic groups. The integrated marketirg framework utilised allowed, moreover, for the collection of market research data on the specific issues of ethnic product penetration dealing with retailing, advertising and product promotion. The evidence highlights the fact that the cultural orientations of ethnic groups are instrunental in providing for differential demand structures. It points to the answer that ethnicity is an anchor not only for a deeper sense of identity; but also serves as a focus for the economic interests of ethnic groups. On this basis it is argued here, that since cultural levelling would eventually produce stagnation; current marketing strategies should utilise ethnic diversity as an econanic artifact; which; per se is necessary for profitability and growth; especially in innovative product design and development.

The economic impact of high growth start-ups:understanding the challenge for policy in the UK

Objectives The creation of more high-growth firms continues to be a key component of enterprise policy throughout the countries of the OECD. In the UK the developing enterprise policy framework highlights the importance of supporting businesses with growth potential. The difficulty, of course, is the ability of those delivering business support policies to accurately identify those businesses, especially at start-up, which will benefit from interventions and experiences an enhanced growth performance. This paper has a core objective of presenting new data on the number of high growth firms in the UK and providing an assessment of their economic significance. Approach This paper uses a specially created longitudinal firm-level database based on the Inter-Departmental Business Register (IDBR) held by the Office of National Statistics (ONS) for all private sector businesses in the UK for the period 1997-2008 to investigate the share of high-growth firms (including a sub-set of start-up more commonly referred to as gazelles) in successive cohorts of start-ups. We apply OECD definitions of high growth and gazelles to this database and are able to quantify for the first time their number (disaggregated by sector, region, size) and importance (employment and sales). Prior Work However, what is lacking at the core of this policy focus is any comprehensive statistical analysis of the scale and nature of high-growth firms in cohorts of new and established businesses. The evidence base in response to the question “Why do high-growth firms matter?” is surprisingly weak. Important work in this area has been initiated by Bartelsman et al., (2003),Hoffman and Jünge (2006) and Henreksen and Johansson (2009) but to date work in the UK has been limited (BERR, 2008b). Results We report that there are ~11,500 high growth firms in the UK in both 2005 and 2008. The share of high growth start-ups in the UK in 2005 (6.3%) was, contrary to the widely held perception in policy circles, higher than in the United States (5.2%). Of particular interest in the analysis are the growth trajectories (pattern of growth) of these firms as well as the extent to which they are restricted to technology-based or knowledge-based sectors. Implications and Value Using hitherto unused population data for the first time we have answered a fundamental research and policy question on the number and scale of high growth firms in the UK. We draw the conclusion that this ‘rare’ event does not readily lend itself to policy intervention on the grounds that the significant effort needed to identify such businesses ex ante would appear unjustified even if it was possible.

Is education the panacea for economic deprivation of Muslims? Evidence from wage earners in India, 1987-2005

Few researchers have examined the nature and determinants of earnings differentials among religious groups, and none has been undertaken in the context of conflict-prone multi-religious societies like the one in India. We address this lacuna in the literature by examining the differences in the average log earnings of Hindu and Muslim wage earners in India, during the 1987–2005 period. Our results indicate that education differences between Hindu and Muslim wage earners, especially differences in the proportion of wage earners with tertiary education, are largely responsible for the differences in the average log earnings of the two religious groups across the years. By contrast, differences in the returns to education do not explain the aforementioned difference in average log earnings. In conclusion, we discuss some policy implications.