Measuring and managing performance in extended enterprises

Purpose - The purpose of this research paper is to demonstrate how existing performance measurement may be adopted to measure and manage performance in extended enterprises. Design/methodology/approach - The paper reviews the literature in performance measurement and extended enterprises. It explains the collaborative architecture of an extended enterprise and demonstrates this architecture through a case study. A model for measuring and managing performance in extended enterprises is developed using the case study. Findings - The research found that due to structural differences between traditional and extended enterprises, the systems required to measure and manage the performance of extended enterprises, whilst being based upon existing performance measurement frameworks, would be structurally and operationally different. Based on this, a model for measuring and managing performance in extended enterprises is proposed which includes intrinsic and extrinsic inter-enterprise coordinating measures. Research limitations/implications - There are two limitations this research. First, the evidence is based on a single case, thus further cases should be studied to establish the generalisibility of the presented results. Second, the practical limitations of the EE performance measurement model should be established through longitudinal action research. Practical implications - In practice the model proposed requires collaborating organisations to be more open and share critical performance information with one another. This will require change in practices and attitudes. Originality/value - The main contribution this paper makes is that it highlights the structural differences between traditional and collaborative enterprises and specifies performance measurement and management requirements of these collaborative organisations. © Emerald Group Publishing Limited.

Structured engagement in the extended enterprise

Discusses the necessity for the conscious recognition of the phenomenon known as the extended enterprise; this demands that product, process and supply chain design are all considered simultaneously. Structure must be given to the extended enterprise in order to understand and manage it efficaciously. The authors discuss multiple perspectives for doing this, and employ the notions of “3-dimensional concurrent engineering” and “holonic thinking” for conceiving what the structure may look like. Describes a current “action research” project that is investigating potential lead-time reductions within an extended enterprise’s product introduction process. This aims to produce process visualisations, a framework for structuring and sychronising phases and stage-gates within the extended enterprise, and a new simulation tool which will provide a synthetic distributed hypermedia network. These deliverables will be used to play strategic “games” to explore problem issues within the product introduction process that belongs to the extended enterprise, develop teamwork across autonomous companies, and ultimately, contribute to the design of future extended enterprise supply chains.

An extended minimax disparity to determine the OWA operator weights

This paper contributes to extend the minimax disparity to determine the ordered weighted averaging (OWA) model based on linear programming. It introduces the minimax disparity approach between any distinct pairs of the weights and uses the duality of linear programming to prove the feasibility of the extended OWA operator weights model. The paper finishes with an open problem. © 2006 Elsevier Ltd. All rights reserved.

Coarse threat images reveal theta oscillations in the amygdala: a magnetoencephalography study

Neurocognitive models propose a specialized neural system for processing threat-related information, in which the amygdala plays a key role in the analysis of threat cues. fMRI research indicates that the amygdala is sensitive to coarse visual threat relevant information—for example, low spatial frequency (LSF) fearful faces. However, fMRI cannot determine the temporal or spectral characteristics of neural responses. Consequently, we used magnetoencephalography to explore spatiotemporal patterns of activity in the amygdala and cortical regions with blurry (LSF) and normal angry, fearful, and neutral faces. Results demonstrated differences in amygdala activity between LSF threat-related and LSF neutral faces (50-250 msec after face onset). These differences were evident in the theta range (4-8 Hz) and were accompanied by power changes within visual and frontal regions. Our results support the view that the amygdala is involved in the early processing of coarse threat related information and that theta is important in integrating activity within emotion-processing networks.

Extended range interrogation of wavelength division multiplexed fibre Bragg grating sensors using an arrayed waveguide grating

A technique for interrogating multiplexed fibre Bragg grating (FBG) sensors using an arrayed waveguide grating (AWG) is described. The approach considerably extends the sensing range from that achieved previously, while providing a strain resolution of 17nevHz at 30 Hz.

Extended-range, low coherence dual wavelength interferometry using a superfluorescent fibre source and chirped fibre Bragg gratings

We describe an all-fibre, passive scheme for making extended range interferometric measurements based on the dual wavelength technique. The coherence tuned interferometer network is illuminated with a single superfluorescent fibre source at 1.55 µm and the two wavelengths are synthesised at the output by means of chirped fibre Bragg gratings. We demonstrate an unambiguous sensing range of 270 µm, with a dynamic range of 2.7 × 10 5.

Tool support for integrating extended enterprises

A current EPSRC project, product introduction process: a simulation in the extended enterprise (PIPSEE) is discussed. PIPSEE attempts to improve the execution of the product introduction process (PIP) within an extended enterprise in the aerospace sector. The modus operandi for accomplishing this has been to develop process understanding amongst a core team, spanning four different companies, through process modelling, review and improvement recommendation. In parallel, a web-based simulation capability is being used to conduct simulation experiments, and to disseminate findings by training others in the lessons that have been learned. It is intended that the use of the PIPSEE simulator should encourage radical thinking about the ‘fuzzy front end’ of the PIP. This presents a topical, exciting and challenging research problem.

Extended surface fluidized bed heat transfer

Experirnental data and theoretical calculation on the heat transfer performance of extended surface submerged: in shallow air fluidized beds ~ less than 150 mm, are presented. Energy t;ransferrence from the bed material was effected by water cooled tubes passing through the fins. The extended surface tested was either manufactured from square or radial copper fins silver soldered to a circular basic tube or commercially supplied, being of the crimped or extruded helical fin type. Performances are compared, for a wide range of geometric variables, bed configurations and fluidized materials, with plain and oval tubes operating under similar experimental conditions. A statistical analysis of all results, using a regression technique, has shown the relative importance of each significant variable. The bed to surface heat transfer coefficients are higher than those reported in earlier published work using finned tubes in much deeper beds and the heat transfer to the whole of the extended surface is at least as good as that previously reported for un-finned tubes. The improved performance is attributed partly to the absence of large bubbles in shallow beds and it is suggested that the improved circulation of the solids when constrained in the narrow passages between adjacent fins may be a contributory factor. Flow visualisation studies between a perspex extended surface and a fluidized bed using air at ambient temperatures, have demonstrated the effect of too small a fin spacing. Fin material and the bonding to the basic tube are more important in the optimisation of performance than in conventional convective applications because of the very much larger heat fluxes involved. A theoretical model of heat flow for a radial fin surface, provides data concerning the maximum heat transfer and minimum metal required to fulfil a given heat exchange duty. Results plotted in a series of charts aim at assisting the designer of shalJow fluidized beds.