The impact of stressors and regulatory focus on creativity:a dual level of analysis

Presentation

Power conversion and signal transmission integration method based on dual modulation of DC-DC converters

For the development of communication systems such as Internet of Things, integrating communication with power supplies is an attractive solution to reduce supply cost. This paper presents a novel method of power/signal dual modulation (PSDM), by which signal transmission is integrated with power conversion. This method takes advantage of the intrinsic ripple initiated in switch mode power supplies as signal carriers, by which cost-effective communications can be realized. The principles of PSDM are discussed, and two basic dual modulation methods (specifically PWM/FSK and PWM/PSK) are concluded. The key points of designing a PWM/FSK system, including topology selection, carrier shape, and carrier frequency, are discussed to provide theoretical guidelines. A practical signal modulation-demodulation method is given, and a prototype system provides experimental results to verify the effectiveness of the proposed solution.

A dual definition for the factor content of trade and its effect on factor rewards in US manufacturing sector

We introduce a dual definition of the Factor Content of Trade (FCT) using the concept of the Equivalent Autarky Equilibrium. Estimating a symmetric normalized quadratic revenue function for the U.S. manufacturing sector between 1965 and 1991, we find that the FCT for capital is positive, while the FCT for skilled and unskilled labor is negative, suggesting that the Leontief Paradox is not present. Then the growth rate of the factor rewards is decomposed to the FCT, endowments, and technological change effects. We find that technological change is the most important determinant in explaining wage inequality between skilled and unskilled labor.

Information geometric measurements of generalisation

Neural networks can be regarded as statistical models, and can be analysed in a Bayesian framework. Generalisation is measured by the performance on independent test data drawn from the same distribution as the training data. Such performance can be quantified by the posterior average of the information divergence between the true and the model distributions. Averaging over the Bayesian posterior guarantees internal coherence; Using information divergence guarantees invariance with respect to representation. The theory generalises the least mean squares theory for linear Gaussian models to general problems of statistical estimation. The main results are: (1)~the ideal optimal estimate is always given by average over the posterior; (2)~the optimal estimate within a computational model is given by the projection of the ideal estimate to the model. This incidentally shows some currently popular methods dealing with hyperpriors are in general unnecessary and misleading. The extension of information divergence to positive normalisable measures reveals a remarkable relation between the dlt dual affine geometry of statistical manifolds and the geometry of the dual pair of Banach spaces Ld and Ldd. It therefore offers conceptual simplification to information geometry. The general conclusion on the issue of evaluating neural network learning rules and other statistical inference methods is that such evaluations are only meaningful under three assumptions: The prior P(p), describing the environment of all the problems; the divergence Dd, specifying the requirement of the task; and the model Q, specifying available computing resources.

Enhancing performance through the introduction of customer orientation into the building components industry

Purpose: This paper aims to describe an investigation into how company performance can be improved by integrating internal and external customers and technology. The approach was developed, implemented and evaluated in the operations of the building components industry. The research was carried out in the precast concrete division of a Singapore company. Design/methodology/ approach: For the purpose of undertaking the investigation an exploratory case study approach was used. This was divided into conceptual and action research stages. The action research was also used to implement the changes in the company. Questionnaire surveys were carried out among company employees and external customers to assess the effect of these changes. Results of the investigation were derived using content and statistical analysis. Triangulation between three sources was used for validating the data. Findings: The exploratory case study strategy resulted in rich research data, which provided evidence of the changes taking place and integration happening, leading to improved performance. The action research approach proved a powerful tool where the uncertainty of outcomes makes it near impossible to make accurate forecasts. Another output of the research was the development of an "integrated customer orientation" (ICO) model. Research limitations/implications: The research in this paper used a single site action research investigation so should be interpreted within the specific company and industry context. There are implications for theory and practice in a number of areas of production and marketing as well as contributions to understanding about productivity improvement and organisational development. The investigation also fulfils the dual objectives of action research by contributing to both knowledge and practice. Originality/value: The paper describes a unique approach towards improving productivity, quality and service through the use of action research to implement changes, as well as providing the research evidence to evaluate both the process of implementation and results achieved. © Emerald Group Publishing Limited.

Cleavage of caspases-1, -3, -6, -8 and -9 substrates by proteases in skeletal muscles from mice undergoing cancer cachexia

A prominent feature of several type of cancer is cachexia. This syndrome causes a marked loss of lean body mass and muscle wasting, and appears to be mediated by cytokines and tumour products. There are several proteases and proteolytic pathways that could be responsible for the protein breakdown. In the present study, we investigated whether caspases are involved in the proteolytic process of skeletal muscle catabolism observed in a murine model of cancer cachexia (MAC16), in comparison with a related tumour (MAC13), which does not induce cachexia. Using specific peptide substrates, there was an increase of 54% in the proteolytic activity of caspase-1, 84% of caspase-8, 98% of caspase-3 151% to caspase-6 and 177% of caspase-9, in the gastrocnemius muscle of animals bearing the MAC16 tumour (up to 25% weight loss), in relation to muscle from animals bearing the MAC13 tumour (1-5% weight loss). The dual pattern of 89 kDa and 25 kDa fragmentation of poly (ADP-ribose) polymerase (PARP) occurred in the muscle samples from animals bearing the MAC16 tumour and with a high amount of caspase-like activity. Cytochrome c was present in the cytosolic fractions of gastrocnemius muscles from both groups of animals, suggesting that cytochrome c release from mitochondria may be involved in caspase activation. There was no evidence for DNA fragmentation into a nucleosomal ladder typical of apoptosis in the muscles of either group of mice. This data supports a role for caspases in the catabolic events in muscle involved in the cancer cachexia syndrome. © 2001 Cancer Research Campaign.

A dynamic model of the hypoxia-inducible factor 1α (HIF-1α) network

Activation of the hypoxia-inducible factor (HIF) pathway is a critical step in the transcriptional response to hypoxia. Although many of the key proteins involved have been characterised, the dynamics of their interactions in generating this response remain unclear. In the present study, we have generated a comprehensive mathematical model of the HIF-1a pathway based on core validated components and dynamic experimental data, and confirm the previously described connections within the predicted network topology. Our model confirms previous work demonstrating that the steps leading to optimal HIF-1a transcriptional activity require sequential inhibition of both prolyl- and asparaginyl-hydroxylases. We predict from our model (and confirm experimentally) that there is residual activity of the asparaginyl-hydroxylase FIH (factor inhibiting HIF) at low oxygen tension. Furthermore, silencing FIH under conditions where prolyl-hydroxylases are inhibited results in increased HIF-1a transcriptional activity, but paradoxically decreases HIF-1a stability. Using a core module of the HIF network and mathematical proof supported by experimental data, we propose that asparaginyl hydroxylation confers a degree of resistance upon HIF-1a to proteosomal degradation. Thus, through in vitro experimental data and in silico predictions, we provide a comprehensive model of the dynamic regulation of HIF-1a transcriptional activity by hydroxylases and use its predictive and adaptive properties to explain counter-intuitive biological observations.

Managing crisis:the role of primary care for people with serious mental illness

Background and Objectives: More than 30% of patients with serious mental illness in the United Kingdom now receive all their health care solely from primary care. This study explored the process of managing acute mental health crises from the dual perspective of patients and primary care health professionals. Methods: Eighteen focus groups involving 45 patients, 39 general practitioners, and eight practice nurses were held between May and November 2002 in six Primary Care Trusts across the British West Midlands. The topic guide explored perceptions of gold standard care, current issues and critical incidents in receiving/providing care, and ideas on improving services. Results: Themes relevant to the management of acute crisis included issues of process, such as access, advocacy, communication, continuity, and coordination of care; the development of more structured care that might reduce the need for crisis responses; and issues raised by the development of a more structured approach to care. Conclusions: Access to services is a complicated yet crucial feature of managing care in a crisis, with patients identifying barriers at the level of primary care and health professionals at the interface with secondary care. The development of more structured systems as a solution may generate its own ethical and pragmatic challenges.

Weak form equation–based finite-element modeling of viscoelastic asphalt mixtures

The objective of this study is to demonstrate using weak form partial differential equation (PDE) method for a finite-element (FE) modeling of a new constitutive relation without the need of user subroutine programming. The viscoelastic asphalt mixtures were modeled by the weak form PDE-based FE method as the examples in the paper. A solid-like generalized Maxwell model was used to represent the deforming mechanism of a viscoelastic material, the constitutive relations of which were derived and implemented in the weak form PDE module of Comsol Multiphysics, a commercial FE program. The weak form PDE modeling of viscoelasticity was verified by comparing Comsol and Abaqus simulations, which employed the same loading configurations and material property inputs in virtual laboratory test simulations. Both produced identical results in terms of axial and radial strain responses. The weak form PDE modeling of viscoelasticity was further validated by comparing the weak form PDE predictions with real laboratory test results of six types of asphalt mixtures with two air void contents and three aging periods. The viscoelastic material properties such as the coefficients of a Prony series model for the relaxation modulus were obtained by converting from the master curves of dynamic modulus and phase angle. Strain responses of compressive creep tests at three temperatures and cyclic load tests were predicted using the weak form PDE modeling and found to be comparable with the measurements of the real laboratory tests. It was demonstrated that the weak form PDE-based FE modeling can serve as an efficient method to implement new constitutive models and can free engineers from user subroutine programming.

Increased risk of diabetes mellitus among persons with psychotic symptoms:results from the WHO World Health Survey

OBJECTIVE: To analyze with a symptom-based approach the relationship between psychosis and diabetes mellitus in the general population. METHOD: Nationally representative samples from the World Health Organization (WHO) World Health Survey, totaling 224,743 randomly selected adults 18 years and older from 52 countries worldwide, were interviewed to establish the presence of psychotic symptoms and diabetes mellitus. Presence of psychotic symptoms was established using questions pertaining to positive symptoms from the psychosis screening module of the Composite International Diagnostic Interview. Presence of diabetes was established with a response of "yes" to the question, "Have you ever been diagnosed with diabetes (high blood sugar)?" The World Health Survey was conducted between 2002 and 2004. RESULTS: An increasing number of psychotic symptoms was related to increasing likelihood of diabetes mellitus (OR = 1.27; 95% CI, 1.24-1.30). As compared to no symptoms, at least 1 psychotic symptom substantially elevated the risk (OR = 1.71; 95% CI, 1.61-1.81). In people with a lifetime diagnosis of schizophrenia or psychosis, the prevalence of diabetes was higher in those with current psychotic symptoms (7.3% vs 5.2%; OR = 1.65; 95% CI, 1.21-2.26), suggesting that the persistence of symptoms over time could play a central role. After controlling for different potential confounders, there was a clear increase in the probability of having diabetes as the number of psychotic symptoms increased. The relationship between psychotic symptoms and diabetes was tested with multiple mediation models and path analyses for categorical outcomes. Only body mass index appeared as a relevant mediator in a model with a good fit (ie, χ21 = 3.2, P = .0742; comparative fit index = 0.999). CONCLUSIONS: Psychotic symptoms are related to increased rates of diabetes mellitus in nonclinical samples, independent of several potential confounders-including a clinical diagnosis of psychosis or schizophrenia, previous antipsychotic treatment, depression, lifestyle, and individual or country socioeconomic status. The findings highlight the worldwide relevance of the problem and the importance of identifying the specific paths of this association.

Liquid desiccant dehumidification and regeneration process to meet cooling and freshwater needs of desert greenhouses

Agriculture accounts for ~70% of freshwater usage worldwide. Seawater desalination alone cannot meet the growing needs for irrigation and food production, particularly in hot, desert environments. Greenhouse cultivation of high-value crops uses just a fraction of freshwater per unit of food produced when compared with open field cultivation. However, desert greenhouse producers face three main challenges: freshwater supply, plant nutrient supply, and cooling of the greenhouse. The common practice of evaporative cooling for greenhouses consumes large amounts of fresh water. In Saudi Arabia, the most common greenhouse cooling schemes are fresh water-based evaporative cooling, often using fossil groundwater or energy-intensive desalinated water, and traditional refrigeration-based direct expansion cooling, largely powered by the burning of fossil fuels. The coastal deserts have ambient conditions that are seasonally too humid to support adequate evaporative cooling, necessitating additional energy consumption in the dehumidification process of refrigeration-based cooling. This project evaluates the use of a combined-system liquid desiccant dehumidifier and membrane distillation unit that can meet the dual needs of cooling and freshwater supply for a greenhouse in a hot and humid environment.

Quantum-dot saturable absorber and Kerr lens mode-locked Yb:KGW laser with >300 kW of peak power

Dual action of quantum-dot saturable absorber and Kerr lens mode locking of a diode-pumped Yb:KGW laser was demonstrated. The laser delivered 105 fs pulses with 2.5 W of average power and >300 kW of peak power.

Regulatory foci and organisational commitment

We use regulatory focus theory to derive specific predictions regarding the differential relationships between regulatory focus and commitment. We estimated a structural equation model using a sample of 520 private and public sector employees and found in line with our hypotheses that (a) promotion focus related more strongly to affective commitment than prevention focus, (b) prevention focus related more strongly to continuance commitment than promotion focus, (c) promotion and prevention focus had equally strong effects on normative commitment. Implications of these findings for the three-component model of commitment, especially the ‘dual nature’ of normative commitment, as well as implications for human resources management and leadership are discussed.

AC self-bearing motors with a bridge configured winding

Magnetic levitation bearings eliminate friction, wear and the need for lubrication and so have high speed capability and potential for vibration control. One noteworthy development in the realm of magnetic levitation is the self-bearing or bearingless motor - an electromagnetic machine that supports its own rotor by way of magnetic forces generated by windings on its stator. Accordingly, various winding schemes have been proposed to accomplish the task of force production. This thesis proposes a novel concept of winding based on a bridge connection for polyphase self-bearing rotating electrical machines with the following advantages: • the connection uses a single set of windings and thus power loss is relatively low when compared with self-bearing motors with conventional dual set of windings. • the motor and levitation controls are segregated such that only one motor inverter is required for the normal torque production and levitation forces are produced by using auxiliary power supplies of relatively low current and voltage rating. The usual way of controlling the motor is retained. • there are many variant winding schemes to meet special needs. • independent power supplies for levitation control offer redundancy for fault tolerance. This thesis dwells specifically on the conceptual design and implementation of the proposed single set of windings scheme. The new connection has been verified to exhibit characteristics of a self-bearing motor via coupled-field finite element analysis: results are crosschecked analytically. Power loss and other aspects such as cost, design implementation are compared to support the newly proposed connection as a potential alternative to present designs.

University ranking as social exclusion

In this article we explore the dual role of global university rankings in the creation of a new, knowledge-identified, transnational capitalist class and in facilitating new forms of social exclusion.We examine how and why the practice of ranking universities has become widely defined by national and international organisations as an important instrument of political and economic policy. We consider how the development of university rankings into a global business combining social research, marketing and public relations, as a tangible policy tool that narrowly redefines the social purposes of higher education itself. Finally, it looks at how the influence of rankings on national funding for teaching and research constrains wider public debate about the meaning of ‘good’ and meaningful education in the UK and other national contexts, particularly by shifting the debate away from democratic publics upward into the elite networked institutions of global capital. We conclude by arguing that, rather than regarding world university rankings as a means to establish criteria of educational value, the practice may be understood as an exclusionary one that furthers the alignment of higher education with neoliberal rationalities at both national and global levels.