An investigation of the mechanics of wire drawing with the superposition of an oscillatory drawing stress

A number of investigators have studied the application of oscillatory energy to a metal undergoing plastic deformation. Their results have shown that oscillatory stresses reduce both the stress required to initiate plastic deformation and the friction forces between the tool and workpiece. The first two sections in this thesis discuss historically and technically the devolopment of the use of oscillatory energy techniques to aid metal forming with particular reference to wire drawing. The remainder of the thesis discusses the research undertaken to study the effect of applying longitudinal oscillations to wire drawing. Oscillations were supplied from an electric hydraulic vibrator at frequencies in the range 25 to 500 c/s., and drawing tests were performed at drawing speeds up to 50 ft/m. on a 2000 lbf. bull-block. Equipment was designed to measure the drawing force, drawing torque, amplitude of die and drum oscillation and drawing speed. Reasons are given for selecting mild steel, pure and hard aluminium, stainless steel and hard copper as the materials to be drawn, and the experimental procedure and calibration of measuring equipment arc described. Results show that when oscillatory stresses are applied at frequencies within the range investigated : (a) There is no reduction in the maximum drawing load. (b) Using sodium stearate lubricant there is a negligible reduction in the coefficient of friction between the die and wire. (c) Pure aluminium does not absorb sufficient oscillatory energy to ease the movement of dislocations. (d) Hard aluminium is not softened by oscillatory energy accelerating the diffusion process. (e) Hard copper is not cyclically softened. A vibration analysis of the bull-block and wire showed that oscillatory drawiing in this frequency range, is a mechanical process of straining; and unstraining the drawn wire, and is dependent upon the stiffness of the material being drawn and the drawing machine. Directions which further work should take are suggested.

Managing from the inside out:drawing on 'receptivity' to explain variation in strategy implementation

With the rise of 'New Public Management' (NPM), government policy has encouraged public-sector organizations to downsize and outsource their services. There is, however, local variation in the use of outsourcing - this is 'managing from the inside out'. This paper draws on the notion of receptivity for organizational change to explain variation in strategy implementation. Four receptivity factors are identified which seem to explain the success of two contrasting English local government outsourcing strategies: ideological vision, leading change, institutional politics and implementation capacity. The organization level of change is interconnected with two other levels of change (the public service and environment levels) to illustrate the dynamic nature of change.

Is competition really bad news for cooperatives? Some empirical evidence for Italian producers' cooperatives

In this paper, we analyse the nature of the relationship between market power and technical efficiency for producers' cooperatives. More specifically we test two hypotheses: first, we evaluate the extent to which increasing market pressure may help producers' cooperatives to improve technical efficiency to guarantee positive profits; second, we test whether higher technical efficiency induces producers' cooperatives to have a larger market share. These hypotheses are tested on a sample of Italian conventional and cooperative firms for the Wine Production and Processing sector, using both frontier analysis and dynamic panel techniques. The results support the hypothesis that increasing market pressure can affect positively the cooperativeś efficiency, while gains in technical efficiency do not seem to have any impact on the cooperatives' market share. © 2008 Springer Science+Business Media, LLC.

Patterns of corporate governance and technical efficiency in Italian manufacturing

The purpose of this paper is to analyse the relationship between the corporate governance system and technical efficiency in Italian manufacturing. We use a non-parametric frontier technique (DEA) to derive technical efficiency measures for a sample of Italian firms taken from nine manufacturing industries. These measures are then related to the characteristics of the corporate governance system. Two of these characteristics turn out to have a positive impact on technical efficiency: the percentage of the company shares owned by the largest shareholder and the fact that a firm belongs to a pyramidal group. Interestingly, a trade-off emerges between these influences, in the sense that one is stronger in industries where the other is weaker. Copyright © 2007 John Wiley & Sons, Ltd.

Public capital and total factor productivity:new evidence from the Italian regions, 1970-98

This paper analyses the relationship between industrial total factor productivity and public capital across the 20 Italian administrative regions. It adds upon the existing literature in a number of ways: it analyses a longer period (1970-98); it allows for the role of human capital accumulation; it tests for the existence of a long-run relationship between total factor productivity and public capital (through previously suggested panel techniques) and for weak exogeneity of public capital; and it assesses the significance of public capital within a non-parametric set-up based on the Free Disposal Hull. The results confirm that public capital has a significant impact on the evolution of total factor productivity, particularly in the Southern regions. This impact is mainly ascribed to the core infrastructures (road and airports, harbours, railroads, water and electricity, telecommunications). Also, core infrastructures are weakly exogenous. © 2005 Regional Studies Association.

Organizational capital, product market competition and technical efficiency in Italian cooperatives

This paper tries to identify under which conditions increasing market competition may help cooperatives to improve technical efficiency to guarantee positive profits. This hypothesis is first formalized in a partial equilibrium framework and then is tested on a sample of Italian conventional and cooperative firms, using frontier analysis. Technical efficiency indexes are computed by using the one-stage approach as suggested by Battese and Coelli (1995), where proxies for competition are introduced as determinants of efficiency, along with other exogenous factors accounting for the firms’ heterogeneity. However, the overall impact of increasing competition on efficiency is negative.

Italian validation of the team climate inventory:a measure of team climate for innovation

Innovation has long been an area of interest to social scientists, and particularly to psychologists working in organisational settings. The team climate inventory (TCI) is a facet-specific measure of team climate for innovation that provides a picture of the level and quality of teamwork in a unit using a series of Likert scales. This paper describes its Italian validation in 585 working group members employed in health-related and other contexts. The data were evaluated by means of factorial analysis (including an analysis of the internal consistency of the scales) and Pearson’s product moment correlations. The results show the internal consistency of the scales and the satisfactory factorial structure of the inventory, despite some variations in the factorial structure mainly due to cultural differences and the specific nature of Italian organisational systems.

The Generalized Malmquist index and capacity utilization change: an application to the Italian manufacturing, 1989-1994

Several indices of plant capacity utilization based on the concept of best practice frontier have been proposed in the literature (Fare et al. 1992; De Borger and Kerstens, 1998). This paper suggests an alternative measure of capacity utilization change based on Generalized Malmquist index, proposed by Grifell-Tatje' and Lovell in 1998. The advantage of this specification is that it allows the measurement of productivity growth ignoring the nature of scale economies. Afterwards, this index is used to measure capacity change of a panel of Italian firms over the period 1989-94 using Data Envelopment Analysis and then its abilities of explaining the short-run movements of output are assessed.

The Mechanics of the drawing of polygonal sections from round at elevated temperature

Economic factors such as the rise in cost of raw materials, labour and power, are compelling manufacturers of cold-drawn polygonal sections, to seek new production routes which will enable the expansion in the varieties of metals used and the inclusion of difficult-to-draw materials. One such method generating considerable industrial interest is the drawing of polygonal sections from round at elevated temperature. The technique of drawing mild steel, medium carbon steel and boron steel wire into octagonal, hexagonal and square sections from round at up to 850 deg C and 50% reduction of area in one pass has been established. The main objective was to provide a basic understanding of the process, with particular emphasis being placed on modelling using both experimental and theoretical considerations. Elevated temperature stress-strain data was obtained using a modified torsion testing machine. Data were used in the upper bound solution derived and solved numerically to predict drawing stress strain, strain-rate, temperature and flow stress distribution in the deforming zone for a range of variables. The success of this warm working process will, of course, depend on the use of a satisfactory elevated temperature lubricant, an efficient cooling system, a suitable tool material having good wear and thermal shock resistance and an efficient die profile design which incorporates the principle of least work. The merits and demerits of die materials such as tungsten carbide, chromium carbide, Syalon and Stellite are discussed, principally from the standpoint of minimising drawing force and die wear. Generally, the experimental and theoretical results were in good agreement, the drawing stress could be predicted within close limits and the process proved to be technically feasible. Finite element analysis has been carried out on the various die geometries and die materials, to gain a greater understanding of the behaviour of these dies under the process of elevated temperature drawing, and to establish the temperature distribution and thermal distortion in the deforming zone, thus establishing the optimum die design and die material for the process. It is now possible to predict, for the materials already tested, (i) the optimum drawing temperature range, (ii) the maximum possible reduction of area per pass, (iii) the optimum drawing die profiles and die materials, (iv) the most efficient lubricant in terms of reducing the drawing force and die wear.