Economic aspects of safety in the Greek construction industry

The thesis addresses the economic impacts of construction safety in Greece. The research involved the development of a methodology for determining the overall costs of safety, namely the sum of the costs of accidents and the costs of safety management failures (with or without accident) including image cost. Hitherto, very little work has been published on the cost of accidents in practical case studies. Moreover, to the author’s belief, no research has been published that seeks to determine in real cases the costs of prevention. The methodology developed is new, transparent, and capable of being replicated and adapted to other employment sectors and to other countries. The methodology was applied to three construction projects in Greece to test the safety costing methodology and to offer some preliminary evidence on the business case for safety. The survey work took place between 1999 and 2001 and involved 27 months of costing work on site. The study focuses on the overall costs of safety that apply to the main (principal) contractor. The methodology is supported by 120 discrete cost categories, and systematic criteria for determining which costs are included (counted) in the overall cost of safety. A quality system (in compliance with ISO9000 series) was developed to support the work and ensure accuracy of data gathering. The results of the study offer some support for the business case for safety. Though they offer good support for the economics of safety as they demonstrate need for cost effectiveness. Subject to important caveats, those projects that appeared to manage safety more cost-effectively achieved the lowest overall safety cost. Nevertheless, results are significantly lower than of other published works for two main reasons; first costs due to damages with no potential to injury were not included and second only costs to main constructor were considered. Study’s results are discussed and compared with other publish works.

Military spending and economic growth in South Africa

This paper undertakes an empirical analysis of the economic effects of military spending on the South African economy. It estimates a neo-classical model common in the literature at the level of the macroeconomy and at the level of the manufacturing sector. An attempt is made to improve upon the model by allowing the data to determine the dynamic structure of the model through an ARDL procedure. No significant impact of military spending is found in aggregate, but there is a significant negative impact for the manufacturing sector. This suggests that the cuts in domestic military procurement that have occurred since 1989 could lead to improved economic performance in South Africa through their impact on the manufacturing sector.

The molecular design of a new solvent for the absorption of carbon dioxide

Gas absorption, the removal of one or more constitutents from a gas mixture, is widely used in chemical processes. In many gas absorption processes, the gas mixture is already at high pressure and in recent years organic solvents have been developed for the process of physical absorption at high pressure followed by low pressure regeneration of the solvent and recovery of the absorbed gases. Until now the discovery of new solvents has usually been by expensive and time consuming trial and error laboratory tests. This work describes a new approach, whereby a solvent is selected from considerations of its molecular structure by applying recently published methods of predicting gas solubility from the molecular groups which make up the solvent molecule. The removal of the acid gases of carbon dioxide and hydrogen sulfide from methane or hydrogen was used as a commercially important example. After a preliminary assessment to identify promising moecular groups, more than eighty new solvent molecules were designed and evaluated by predicting gas solubility. The other important physical properties were also predicted by appropriate theoretical procedures, and a commercially promising new solvent was chosen to have a high solubility for acid gases, a low solubility for methane and hydrogen, a low vapour pressure, and a low viscosity. The solvent chosen, of molecular structure Ch3-COCH2-CH2-CO-CH3, was tested in the laboratory and shown to have physical properties, except for vapour pressures, close to those predicted. That is gas solubilities were within 10% but lower than predicted. Viscosity within 10% but higher than predicted and a vapour pressure significantly lower than predicted. A computer program was written to predict gas solubility in the new solvent at the high pressures (25 bar) used in practice. This is based on the group contribution method of Skold Jorgensen (1984). Before using this with the new solvent, Acetonyl acetone, the method was show to be sufficiently accurate by comparing predicted values of gas solubility with experimental solubilities from the literature for 14 systems up to 50 bar. A test of the commercial potential of the new solvent was made by means of two design studies which compared the size of plant and approximate relative costs of absorbing acid gases by means of the new solvent with other commonly used solvents. These were refrigerated methanol(Rectisol process) and Dimethyl Ether or Polyethylene Glycol(Selexol process). Both studies showed in terms of capital and operating cost some significant advantage for plant designed for the new solvent process.

Llanvirn trilobites from South Wales

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Review of doctoral research in second-language teaching and learning in Australia (2003–2006)

This article reviews recent doctoral research in Australian universities in the area of language teaching and learning. Doctoral work in three main areas of research concentration is described: language teaching, language learning, and writing. The authors whose studies are reviewed are graduates of the Australian National University, Griffith University, Macquarie University, the University of Technology, Sydney, the University of Sydney, the University of New South Wales, the University of Melbourne, Monash University, La Trobe University, Deakin University and Murdoch University.

Community accessibility of health information and the consequent impact for translation into community languages

This paper reports on a research project that investigated the accessibility of health information and the consequent impact for translation into community languages. This is a critical aspect of the mediation of intercultural and interlingual communication in the domain of public health information and yet very little research has been undertaken to address such issues. The project was carried out in collaboration with the New South Wales Multicultural Health Communication Service (MHCS), which provides advice and services to state-based health professionals aiming to communicate with non-English speaking communities. The research employed a mixed-method and action research based approach involving two phases. The primary focus of this paper is to discuss major quantitative findings from the first pilot phase, which indicated that there is much room to improve the way in which health information is written in English for effective community-wide communication within a multilingual society.