Mass spectrometric analysis of HOCl- and free-radical-induced damage to lipids and proteins

In inflammatory diseases, release of oxidants leads to oxidative damage to biomolecules. HOCl (hypochlorous acid), released by the myeloperoxidase/H2O2/Cl- system, can cause formation of phospholipid chlorohydrins, or alpha-chloro-fatty aldehydes from plasmalogens. It can attack several amino acid residues in proteins, causing post-translational oxidative modifications of proteins, but the formation of 3-chlorotyrosine is one of the most stable markers of HOCl-induced damage. Soft-ionization MS has proved invaluable for detecting the occurrence of oxidative modifications to both phospholipids and proteins, and characterizing the products generated by HOCl-induced attack. For both phospholipids and proteins, the application of advanced mass spectrometric methods such as product or precursor ion scanning and neutral loss analysis can yield information both about the specific nature of the oxidative modification and the biomolecule modified. The ideal is to be able to apply these methods to complex biological or clinical samples, to determine the site-specific modifications of particular cellular components. This is important for understanding disease mechanisms and offers potential for development of novel biomarkers of inflammatory diseases. In the present paper, we review some of the progress that has been made towards this goal.

Chlorinated lipids and fatty acids:an emerging role in pathology

Although the existence of halogenated lipids in lower organisms has been known for many years, it is only since the 1990s that interest in their occurrence in mammalian systems has developed. Chlorinated (and other halogenated) lipids can arise from oxidation by hypohalous acids, such as HOCl, which are products of the phagocytic enzyme myeloperoxidase and are generated during inflammation. The major species of chlorinated lipids investigated to date are chlorinated sterols, fatty acid and phospholipid chlorohydrins, and a-chloro fatty aldehydes. While all of these chlorinated lipids have been shown to be produced in model systems from lipoproteins to cells subjected to oxidative stress, as yet only a-chloro fatty aldehydes, such as 2-chlorohexadecanal, have been detected in clinical samples or animal models of disease. a-Chloro fatty aldehydes and chlorohydrins have been found to have a number of potentially pro-inflammatory effects ranging from toxicity to inhibition of nitric oxide synthesis and upregulation of vascular adhesion molecules. Thus evidence is building for a role of chlorinated lipids in inflammatory disease, although much more research is required to establish the contributions of specific compounds in different disease pathologies. Preventing chlorinated lipid formation and indeed other HOCl-induced damage, via the inhibition of myeloperoxidase, is an area of growing interest and may lead in the future to antimyeloperoxidase-based antiinflammatory therapy. However, other chlorinated lipids, such as punaglandins, have beneficial effects that could offer novel therapies for cancer.

Reactive oxygen species induce antigenic changes in DNA

Reactive oxygen species (ROS) are released at sites of inflammation during the respiratory burst which accompanies the phagocytic process. Using an in vitro system to simulate this process we have shown that ROS induce antigenic changes in DNA. More specifically, results of experiments using ROS scavengers have shown that hydroxyl radicals produced in close proximity to DNA-bound metal ions play a predominant role. ROS-mediated attack resulted in increased binding of anti-DNA antibodies to the denatured DNA. These changes were detected using IgG, IgA and IgM isotype binding to antibodies in systemic lupus erythematosus sera. Of these the IgA isotype was most discriminating in its detection of hydroxyl radical-induced damage.

Mitochondrial superoxide anion radicals mediate induction of apoptosis in cardiac myoblasts exposed to chronic hypoxia

Both reactive oxygen species (ROS) and ATP depletion may be significant in hypoxia-induced damage and death, either collectively or independently, with high energy requiring, metabolically active cells being the most susceptible to damage. We investigated the kinetics and effects of ROS production in cardiac myoblasts, H9C2 cells, under 2%, 10% and 21% O2 in the presence or absence of apocynin, rotenone and carbonyl cyanide p-(trifluoromethoxy) phenylhydrazone. H9C2 cells showed significant loss of viability within 30 min of culture at 2% oxygen which was not due to apoptosis, but was associated with an increase in protein oxidation. However, after 4 h, apoptosis induction was observed at 2% oxygen and also to a lesser extent at 10% oxygen; this was dependent on the levels of mitochondrial superoxide anion radicals determined using dihydroethidine. Hypoxia-induced ROS production and cell death could be rescued by the mitochondrial complex I inhibitor, rotenone, despite further depletion of ATP. In conclusion, a change to superoxide anion radical steady state level was not detectable after 30 min but was evident after 4 h of mild or severe hypoxia. Superoxide anion radicals from the mitochondrion and not ATP depletion is the major cause of apoptotic cell death in cardiac myoblasts under chronic, severe hypoxia.

Ion plating

Under ideal conditions ion plating produces finely grained dense coatings with excellent adhesion. The ion bombardment induced damage initiates a large number of small nuclei. Simultaneous coating and sputtering stimulates high rates of diffusion and forms an interfacial region of graded composition responsible for good adhesion. To obtain such coatings on components far industrial applications, the design and construction Of an ion plater with a 24" (O.6rn) diameter chamber were investigated and modifications of the electron beam gun were proposed. A 12" (O.3m) diameter ion plater was designed and constructed. The equipment was used to develop surfaces for solar energy applications. The conditions to give extended surfaces by sputter etching were studied. Austenitic stainless steel was sputter etched at 20 and 30 mTorr working pressure and at 3, 4 and 5 kV. Uniform etching was achieved by redesigning the specimen holder to give a uniform electrostatic field over the surfaces of the specimens. Surface protrusions were observed after sputter etching. They were caused by the sputter process and were independent of grain boundaries, surface contaminants and inclusions. The sputtering rate of stainless steel was highly dependent on the background pressure which should be kept below 10-5 Torr. Sputter etching improved the performance of stainless steel used as a solar selective surface. A twofold improvement was achieved on sputter etching bright annealed stainless steel. However, there was only slight improvement after sputter etching stainless steel which had been mechanically polished to a mirror finish. Cooling curves Were used to measure the thermal emittance of specimens.The deposition rate of copper was measured at different levels of power input and was found to be a maximum at 9.5 kW. The diameter of the copper feed rod was found to be critical for the maintenance of a uniform evaporation rate.

Towards standardization of UV eye protection:what can be learned from photodermatology?

While knowledge about standardization of skin protection against ultraviolet radiation (UVR) has progressed over the past few decades, there is no uniform and generally accepted standardized measurement for UV eye protection. The literature provides solid evidence that UV can induce considerable damage to structures of the eye. As well as damaging the eyelids and periorbital skin, chronic UV exposure may also affect the conjunctiva and lens. Clinically, this damage can manifest as skin cancer and premature skin ageing as well as the development of pterygia and premature cortical cataracts. Modern eye protection, used daily, offers the opportunity to prevent these adverse sequelae of lifelong UV exposure. A standardized, reliable and comprehensive label for consumers and professionals is currently lacking. In this review we (i) summarize the existing literature about UV radiation-induced damage to the eye and surrounding skin; (ii) review the recent technological advances in UV protection by means of lenses; (iii) review the definition of the Eye-Sun Protection Factor (E-SPF®), which describes the intrinsic UV protection properties of lenses and lens coating materials based on their capacity to absorb or reflect UV radiation; and (iv) propose a strategy for establishing the biological relevance of the E-SPF. © 2013 John Wiley & Sons A/S.