Outage-optimal relay strategy under outdated channel state information in decode-and-forward cooperative communication systems

In this study, the authors investigate the outage-optimal relay strategy under outdated channel state information (CSI) in a decode-and-forward cooperative communication system. They first confirm mathematically that minimising the outage probability under outdated CSI is equivalent to minimising the conditional outage probability on the outdated CSI of all the decodable relays' links. They then propose a multiple-relay strategy with optimised transmitting power allocation (MRS-OTPA) that minimises the conditional outage probability. It is shown that this MRS is a generalised relay approach to achieve the outage optimality under outdated CSI. To reduce the complexity, they also propose a MRS with equal transmitting power allocation (MRS-ETPA) that achieves near-optimal outage performance. It is proved that full spatial diversity, which has been achieved under ideal CSI, can still be achieved under outdated CSI through MRS-OTPA and MRS-ETPA. Finally, the outage performance and diversity order of MRS-OTPA and MRS-ETPA are evaluated by simulation.

Optimization of relay selection in DF cooperative systems with outdated CSI

Relay selection has been considered as an effective method to improve the performance of cooperative communication. However, the Channel State Information (CSI) used in relay selection can be outdated, yielding severe performance degradation of cooperative communication systems. In this paper, we investigate the relay selection under outdated CSI in a Decode-and-Forward (DF) cooperative system to improve its outage performance. We formulize an optimization problem, where the set of relays that forwards data is optimized to minimize the probability of outage conditioned on the outdated CSI of all the decodable relays’ links. We then propose a novel multiple-relay selection strategy based on the solution of the optimization problem. Simulation results show that the proposed relay selection strategy achieves large improvement of outage performance compared with the existing relay selection strategies combating outdated CSI given in the literature.

Conditional distribution modeling for estimating and exploiting uncertainty in control systems

This paper presents a general methodology for estimating and incorporating uncertainty in the controller and forward models for noisy nonlinear control problems. Conditional distribution modeling in a neural network context is used to estimate uncertainty around the prediction of neural network outputs. The developed methodology circumvents the dynamic programming problem by using the predicted neural network uncertainty to localize the possible control solutions to consider. A nonlinear multivariable system with different delays between the input-output pairs is used to demonstrate the successful application of the developed control algorithm. The proposed method is suitable for redundant control systems and allows us to model strongly non Gaussian distributions of control signal as well as processes with hysteresis.

The dialectics of corporate reporting:a semiotic analysis of corporate financial and environmental reporting

The central argument to this thesis is that the nature and purpose of corporate reporting has changed over time to become a more outward looking and forward looking document designed to promote the company and its performance to a wide range of shareholders, rather than merely to report to its owners upon past performance. it is argued that the discourse of environmental accounting and reporting is one driver for this change but that this discourse has been set up as in conflicting with the discourse of traditional accounting and performance measurement. The effect of this opposition between the discourses is that the two have been interpreted to be different and incompatible dimensions of performance with good performance along one dimension only being achievable through a sacrifice of performance along the other dimension. Thus a perceived dialectic in performance is believed to exist. One of the principal purposes of this thesis is to explore this perceived dialectic and, through analysis, to show that it does not exist and that there is not incompatibility. This exploration and analysis is based upon an investigation of the inherent inconsistencies in such corporate reports and the analysis makes use of both a statistical analysis and a semiotic analysis of corporate reports and the reported performance of companies along these dimensions. Thus the development of a semiology of corporate reporting is one of the significant outcomes of this thesis. A further outcome is a consideration of the implications of the analysis for corporate performance and its measurement. The thesis concludes with a consideration of the way in which the advent of electronic reporting may affect the ability of organisations to maintain the dialectic and the implications for corporate reporting.

FDI horizontal and vertical effects on local firm technical efficiency

Differencing from previous studies on foreign direct investment (FDI) spillovers to domestic enterprises which mainly focus on productivity, in this paper we take a different perspective by analysing the impacts of FDI to technical efficiency of domestic firms. The paper goes beyond the current literature to shed some light on the spillover effects of FDI to technical efficiency of small and medium enterprises in a developing country. By exploiting a firm-level panel dataset and using SFA models following Battese and Coelli (1995), the paper is able to analyse horizontal spillovers through imitation and competition and labour mobility as well as vertical spillovers through backward and forward linkages on technical efficiency. The paper contributes to the understanding of potential effects on foreign invested enterprises on domestic economy in general and local enterprises performance in particular. Thus it importantly assists policy making by the government of developing countries, where FDI is believed to create technical spillovers on domestic enterprises.

Spillovers from FDI and local networks:the importance of transactional linkages and vertical keiretsu in Japan

Purpose – The purpose of this paper is to explore the importance of host country networks and organisation of production in the context of international technology transfer that accompanies foreign direct investment (FDI). Design/methodology/approach – The empirical analysis is based on unbalanced panel data covering Japanese firms active in two-digit manufacturing sectors over a seven-year period. Given the self-selection problem affecting past sectoral-level studies, using firm-level panel data is a prerequisite to provide robust empirical evidence. Findings – While Japan is thought of as being a technologically advanced country, the results show that vertical productivity spillovers from FDI occur in Japan, but they are sensitive to technological differences between domestic firms and the idiosyncratic Japanese institutional network. FDI in vertically organised keiretsu sectors generates inter-industry spillovers through backward and forward linkages, while FDI within sectors linked to vertical keiretsu activities adversely affects domestic productivity. Overall, our results suggest that the role of vertical keiretsu is more prevalent than that of horizontal keiretsu. Originality/value – Japan’s industrial landscape has been dominated by institutional clusters or networks of inter-firm organisations through reciprocated, direct and indirect ties. However, interactions between inward investors and such institutionalised networks in the host economy are seldom explored. The role and characteristics of local business groups, in the form of keiretsu networks, have been investigated to determine the scale and scope of spillovers from inward FDI to Japanese establishments. This conceptualisation depends on the institutional mechanism and the market structure through which host economies absorb and exploit FDI.

Typical behavior of relays in communication channels

The typical behavior of the relay-without-delay channel under low-density parity-check coding and its multiple-unit generalization, termed the relay array, is studied using methods of statistical mechanics. A demodulate-and- forward strategy is analytically solved using the replica symmetric ansatz which is exact in the system studied at Nishimori's temperature. In particular, the typical level of improvement in communication performance by relaying messages is shown in the case of a small and a large number of relay units. © 2007 The American Physical Society.

The influence of climate on the dispersal of lichen soredia

The relationship between the daily deposition of soredia of Hypogymnia physodes (L.) Nyl. and local climatic records was studied in the field during three periods at a site in Seattle, WA, U.S.A: (1) 11 August – 16 September 1986 (Study A); (2) 16 December – 11 January 1987 (Study B) and (3) 8 July 1988 – 30 January 1989 (Study C). The soredia were trapped on adhesive strips placed at various locations on a Prunus blireiana L. tree for 24 hr periods. A correlation matrix of the data from all three studies revealed a negative correlation between soredial deposition and relative humidity; and a positive correlation with rainfall and temperature. A multiple regression and forward stepwise regression analysis selected relative humidity as the most significant climatic variable, i.e. more soredia tended to be deposited when relative humidity was low. Analysis of individual studies by multiple regression revealed: (1) no significant relationships between soredial deposition and climate in Study A; (2) positive relationships with temperature and wind speed in Study B and (3) positive relationships with wind speed and rainfall in the summer/autumn months of Study C; in the winter months no relationships with climate were found because few soredia were deposited. The data suggest that in the field seasonal photoperiod differences combined with moderately high temperatures and high relative humidity may promote soredial formation and accumulation on thalli prior to soredia dispersal. In addition, low relative humidity may promote soredial release while wind and raindrops may be possible agents of dispersal.

Impact of RFID in reverse logistics

This paper aims to discuss the recent literature on Radio Frequency Identification (RFID) and reverse logistics (RL). Particular attention is applied to the bullwhip effect and its increase as RL activities are integrated into the supply chain. RFID is investigated as a tool to assist with integrating reverse and forward logistics into a seamless supply chain and reduce the bullwhip effect. However, further research is required within this area and in particular the return on investment for RFID-enabled integrated systems.

Tracing requirements for adaptive systems using claims

The complexity of environments faced by dynamically adaptive systems (DAS) means that the RE process will often be iterative with analysts revisiting the system specifications based on new environmental understanding product of experiences with experimental deployments, or even after final deployments. An ability to trace backwards to an identified environmental assumption, and to trace forwards to find the areas of a DAS's specification that are affected by changes in environmental understanding aids in supporting this necessarily iterative RE process. This paper demonstrates how claims can be used as markers for areas of uncertainty in a DAS specification. The paper demonstrates backward tracing using claims to identify faulty environmental understanding, and forward tracing to allow generation of new behaviour in the form of policy adaptations and models for transitioning the running system. © 2011 ACM.

Optimal designs of collaborative relay-assisted multiuser beamforming for cellular systems

With careful calculation of signal forwarding weights, relay nodes can be used to work collaboratively to enhance downlink transmission performance by forming a virtual multiple-input multiple-output beamforming system. Although collaborative relay beamforming schemes for single user have been widely investigated for cellular systems in previous literatures, there are few studies on the relay beamforming for multiusers. In this paper, we study the collaborative downlink signal transmission with multiple amplify-and-forward relay nodes for multiusers in cellular systems. We propose two new algorithms to determine the beamforming weights with the same objective of minimizing power consumption of the relay nodes. In the first algorithm, we aim to guarantee the received signal-to-noise ratio at multiusers for the relay beamforming with orthogonal channels. We prove that the solution obtained by a semidefinite relaxation technology is optimal. In the second algorithm, we propose an iterative algorithm that jointly selects the base station antennas and optimizes the relay beamforming weights to reach the target signal-to-interference-and-noise ratio at multiusers with nonorthogonal channels. Numerical results validate our theoretical analysis and demonstrate that the proposed optimal schemes can effectively reduce the relay power consumption compared with several other beamforming approaches. © 2012 John Wiley & Sons, Ltd.

Accurate modelling of pulse transformation by adjustable-in-time medium parameters

A possibility of a strong change of an electromagnetic signal by a short sequence of time cycles of pulses that modulate the medium parameters is shown. The backward wave is demonstrated to be an inevitable result of the medium time change. Dependence of the relation between backward and forward waves on the parameters of the medium modulation is investigated. The finite statistical complexity of the electromagnetic signal transformed by a finite sequence of modulating cycles is calculated. Increase of the complexity with the number of cycles is shown.

Is there a role for telemedicine in adult allergy services?

Telemedicine refers to the application of telecommunication and information technology (IT) in the delivery of health and clinical care at a distance or remotely and can be broadly considered in two modalities: store-and-forward and real-time interactive services. Preliminary studies have shown promising results in radiology, dermatology, intensive care, diabetes, rheumatology and primary care. However, the evidence is limited and hampered by small sample sizes, paucity of randomised controlled studies and lack of data relating to cost-effectiveness, health related quality of life and patient and clinician satisfaction. This review appraises the evidence from studies that have employed telemedicine tools in other disciplines and makes suggestions for its potential applications in specific clinical scenarios in adult allergy services. Possible examples include: triaging patients to determine the need for allergy tests; pre-assessment for specialised treatments such as allergen immunotherapy; follow up to assess treatment response and side effects; and education in self-management plan including training updates for self-injectable adrenaline and nasal spray use. This approach might improve access for those with limited mobility or living far away from regional centres, as well as bringing convenience and cost savings for the patient and service provider. These potential benefits need to be carefully weighed against evidence of service safety and quality. Keys to success include delineation of appropriate clinical scenarios, patient selection, training, IT support and robust information governance framework. Well-designed prospective studies are needed to evaluate its role. This article is protected by copyright. All rights reserved.

Performance evaluation of reverse osmosis (RO) pre-treatment technologies for in-land brackish water treatment

Integration of renewable energy with desalination technologies has emerged as an attractive solution to augment fresh water supply sustainably. Fouling and scaling are still considered as limiting factors in membrane desalination processes. For brackish water treatment, pre-treatment of reverse osmosis (RO) feed water is a key step in designing RO plants avoiding membrane fouling. This study aims to compare at pilot scale the rejection efficiency of RO membranes with multiple pre-treatment options at different water recoveries (30, 35, 40, 45 and 50%) and TDS concentrations (3500, 4000, and 4500mg/L). Synthetic brackish water was prepared and performance evaluation were carried out using brackish water reverse osmosis (BWRO) membranes (Filmtec LC-LE-4040 and Hydranautics CPA5-LD-4040) preceded by 5 and 1μm cartridge filters, 0.02μm ultra-filtration (UF) membrane, and forward osmosis (FO) membrane using 0.25M NaCl and MgCl2 as draw solutions (DS). It was revealed that FO membrane with 0.25M MgCl2 used as a draw solution (DS) and Ultra-filtration (UF) membrane followed by Filmtec membrane gave overall 98% rejection but UF facing high fouling potential due to high applied pressure. Use of 5 and 1μm cartridge filter prior to Filmtec membrane also showed effective results with 95% salt rejection.

Regularization and complexity control in feed-forward networks

In this paper we consider four alternative approaches to complexity control in feed-forward networks based respectively on architecture selection, regularization, early stopping, and training with noise. We show that there are close similarities between these approaches and we argue that, for most practical applications, the technique of regularization should be the method of choice.