Understanding the role of self-identity in habitual risky behaviours: pedestrian road-crossing decisions across the lifespan

Self-identity as a careful pedestrian has not been fully considered in previous work on predicting intention to cross the road, or actual crossing behaviour, in non-optimal situations. Evidence suggests that self-identity may be a better predictor than attitudes in situations where decision-making styles have become habitual ways to respond. This study compared contributions of self-identity and attitudes to the prediction of intentions in two situations differing in level of habitual crossing expectation, and to crossing behaviour. Three hundred and sixty-two adults (17–92 years) completed a questionnaire measuring self-identity, attitudes, intentions, experience, social identity variables (e.g. age, gender) and personal limitations (mobility). Two hundred and five participants also completed a road-crossing simulation. Self-identity and attitude were both shown as significant independent predictors of intention in both situations. However, self-identity was less effective as a predictor in the higher risk scenario, where intention to perform the behaviour was lower, and for participants aged >75 years who had lower intention across scenarios. Self-identity strongly predicted intention to cross, which in turn predicted behaviour, but self-identity did not directly predict behaviour. Self-identity was strongly predicted by age. Implications for theories of compensation in older age and for design and targeting of pedestrian safety education are discussed.

Financial liberalization and dynamics of firm-level financing and investment decisions in the Southeast Asian countries

This thesis examines the dynamics of firm-level financing and investment decisions for six Southeast Asian countries. The study provides empirical evidence on the impacts of changes in the firm-level financing decisions during the period of financial liberalization by considering the debt and equity financing decisions of a set of non-financial firms. The empirical results show that firms in Indonesia, Pakistan, and South Korea have relatively faster speed of adjustment than other Southeast Asian countries to attain optimal debt and equity ratios in response to banking sector and stock market liberalization. In addition, contrary to widely held belief that firms adjust their financial ratios to industry levels, the results indicate that industry factors do not significantly impact on the speed of capital structure adjustments. This study also shows that non-linear estimation methods are more appropriate than linear estimation methods for capturing changes in capital structure. The empirical results also show that international stock market integration of these countries has significantly reduced the equity risk premium as well as the firm-level cost of equity capital. Thus stock market liberalization is associated with a decrease in the cost of equity capital of the firms. Developments in the securities markets infrastructure have also reduced the cost of equity capital. However, with increased integration there is the possibility of capital outflows from the emerging markets, which might reverse the pattern of decrease in cost of capital in these markets.

Evaluating the impact of design decisions on the financial performance of manufacturing companies

Product design decisions can have a significant impact on the financial and operation performance of manufacturing companies. Therefore good analysis of the financial impact of design decisions is required if the profitability of the business is to be maximised. The product design process can be viewed as a chain of decisions which links decisions about the concept to decisions about the detail. The idea of decision chains can be extended to include the design and operation of the 'downstream' business processes which manufacture and support the product. These chains of decisions are not independent but are interrelated in a complex manner. To deal with the interdependencies requires a modelling approach which represents all the chains of decisions, to a level of detail not normally considered in the analysis of product design. The operational, control and financial elements of a manufacturing business constitute a dynamic system. These elements interact with each other and with external elements (i.e. customers and suppliers). Analysing the chain of decisions for such an environment requires the application of simulation techniques, not just to any one area of interest, but to the whole business i.e. an enterprise simulation. To investigate the capability and viability of enterprise simulation an experimental 'Whole Business Simulation' system has been developed. This system combines specialist simulation elements and standard operational applications software packages, to create a model that incorporates all the key elements of a manufacturing business, including its customers and suppliers. By means of a series of experiments, the performance of this system was compared with a range of existing analysis tools (i.e. DFX, capacity calculation, shop floor simulator, and business planner driven by a shop floor simulator).

A simultaneous examination of the effects of salesperson relationship-building activities and marketing activities on retail buyers' purchase decisions

Firms’ contemporary selling practices often not only demand that salespeople meet sales quotas, but also that they build strong, profitable relationships with customers. Given the belief that relationship-building activities can develop closer customer ties and improve sales performance, scholars have increasingly studied salesperson behaviors aimed at nurturing buyer-salesperson relations. However, while previous sales research has investigated the effects of a number of relational activities on performance outcomes in isolation, knowledge about their effectiveness in comparison to other important performance drivers is virtually absent. The present study provides some first theoretical and empirical insights into this research gap by simultaneously examining the role of specific salesperson relationship-building activities, and product-focused variables, in retail buyers’ new product purchase decisions. Following an extensive literature review, a two-part qualitative field study was conducted to explore salesperson relationship-building activities that are regarded as important by retail buyers. Two key relational behaviors were suggested by the customer-centric and retail industry-specific data; salesperson consultation (communication-based) and salesperson helping behavior (action-based). Drawing on this as well as extant literature, a conceptual framework was developed concerning the influences of these relationship-building activities and other product-focused factors on retail buyers’ new product acceptance. The study’s quantitative component contained a mail and web survey of U.S. retail buyers, resulting in a total dataset of 192 responses. After a comprehensive measure validation process, the theoretical hypotheses were tested using logistic regression analysis. Contrary to existing assertions, the results suggest that salesperson relationship-building activities themselves do not directly and/or indirectly influence purchase decisions, but instead can moderate the effects of product-focused determinants on retail buyers’ new product selections. Data on actual purchase decisions provide a high level of external validity to the findings. The study closes with a concluding discussion, including theoretical and managerial implications of the findings, limitations of the research, and directions for future inquiry.

The governance of justice and internal security in Scotland:between the Scottish independence referendum and British decisions on the EU

This article examines how the governance of justice and internal security in Scotland could be affected by the outcome of the Scottish independence referendum in September 2014. The article argues that it is currently impossible to equate a specific result in the referendum with a given outcome for the governance of justice and internal security in Scotland. This is because of the complexities of the current arrangements in that policy area and the existence of several changes that presently affect them and are outside the control of the government and of the people of Scotland. This article also identifies an important paradox. In the policy domain of justice and internal security, a ‘no’ vote could, in a specific set of circumstances, actually lead to more changes than a victory of the ‘yes’ camp.

Audit fees, non-audit fees and auditor going-concern reporting decisions in the United Kingdom

The accounting profession has come under increased scrutiny over recent years about the growing number of non-audit fees received from audit clients and the possible negative impact of such fees on auditor independence. The argument advanced is that providing substantial amounts of non-audit services to clients may make it more likely that auditors concede to the wishes of the client management when difficult judgments are made. Such concerns are particularly salient in the case of reporting decisions related to going-concern uncertainties for financially stressed clients. This study empirically examines audit reports provided to financially stressed companies in the United Kingdom and the magnitude of audit and non-audit service fees paid to the company’s auditors. We find that the magnitude of both audit fees and non-audit fees are significantly associated with the issuance of a going-concern modified audit opinion. In particular, financially stressed companies with high audit fees are more likely to receive a going-concern modified audit opinion, whereas companies with high non-audit fees are less likely to receive a goingconcern modified audit opinion. Additional analyses indicate that the results are generally robust across alternative model and variable specifications. Overall, evidence supports the contention that high non-audit fees have a detrimental effect on going-concern reporting judgments for financially stressed U.K. companies.

An illustration of variable precision rough sets model:an analysis of the findings of the UK Monopolies and Mergers Commission

This paper introduces a new technique in the investigation of limited-dependent variable models. This paper illustrates that variable precision rough set theory (VPRS), allied with the use of a modern method of classification, or discretisation of data, can out-perform the more standard approaches that are employed in economics, such as a probit model. These approaches and certain inductive decision tree methods are compared (through a Monte Carlo simulation approach) in the analysis of the decisions reached by the UK Monopolies and Mergers Committee. We show that, particularly in small samples, the VPRS model can improve on more traditional models, both in-sample, and particularly in out-of-sample prediction. A similar improvement in out-of-sample prediction over the decision tree methods is also shown.

Multinational enterprises and technological effort by local firms:a case study of the Malaysian electronics and electrical industry

It is often assumed that foreign MNEs are the driving force behind technological development in developing economies but it has become evident in recent years that the actions of MNEs in isolation from the domestic economy. The study, therefore, examines the determinants of local firms' decisions to undertake technological effort, not only in isolation, but also in the context of linkages between domestic firms and MNEs. There is evidence that linkages between MNEs and local firms are important in explaining technological effort by local firms but direct technological assistance from MNEs does not seem to play a major role in fostering increased technological effort by local firms.

Applications of the behavioural homogeneity evaluation framework: the predictive ability of consumer involvement for international food market segmentation

This article proposes a framework of alternative international marketing strategies, based on the evaluation of intra- and inter-cultural behavioural homogeneity for market segmentation. The framework developed in this study provides a generic structure to behavioural homogeneity, proposing consumer involvement as a construct with unique predictive ability for international marketing strategy decisions. A model-based segmentation process, using structural equation models, is implemented to illustrate the application of the framework.

Do tinted lenses or filters improve visual performance in low vision? A review of the literature

This is a review of studies that have investigated the proposed rehabilitative benefit of tinted lenses and filters for people with low vision. Currently, eye care practitioners have to rely on marketing literature and anecdotal reports from users when making recommendations for tinted lens or filter use in low vision. Our main aim was to locate a prescribing protocol that was scientifically based and could assist low vision specialists with tinted lens prescribing decisions. We also wanted to determine if previous work had found any tinted lens/task or tinted lens/ocular condition relationships, i.e. were certain tints or filters of use for specific tasks or for specific eye conditions. Another aim was to provide a review of previous research in order to stimulate new work using modern experimental designs. Past studies of tinted lenses and low vision have assessed effects on visual acuity (VA), grating acuity, contrast sensitivity (CS), visual field, adaptation time, glare, photophobia and TV viewing. Objective and subjective outcome measures have been used. However, very little objective evidence has been provided to support anecdotal reports of improvements in visual performance. Many studies are flawed in that they lack controls for investigator bias, and placebo, learning and fatigue effects. Therefore, the use of tinted lenses in low vision remains controversial and eye care practitioners will have to continue to rely on anecdotal evidence to assist them in their prescribing decisions. Suggestions for future research, avoiding some of these experimental shortcomings, are made. © 2002 The College of Optometrists.

The impact of the language barrier on the management of multinational companies : a case study and survey, based exploration of the impact of the language barrier on the strategies, policies and systems by which multinational companies manage their subsidaries

The thesis begins with a conceptual model of the way that language diversity affects the strategies, organisation and subsidiary control policies of multinational companies. The model is based solely on the researcher'’ personal experience of working in a variety of international management roles, but in Chapter 2 a wide-ranging review of related academic literature finds evidence to support the key ideas. The model is developed as a series of propositions which are tested in a comparative case study, refined and then re-tested in a global survey of multinational subsidiaries. The principal findings of the empirical phases of the thesis endorse the main tenets of the model: - That language difference between parent and subsidiary will impair communication, create mistrust and impede relationship development. - That subsequently the feelings of uncertainty, suspicion and mistrust will influence the decisions taken by the parent company. - They will have heightened sensitivity to language issues and will implement policies to manage language differences. - They will adopt low-risk strategies in host countries where they are concerned about language difference. - They will use organisational and manpower strategies to minimise the consequences and risks of the communications problems with the subsidiary. - As a consequence the level of integration and knowledge flow between parent and subsidiary will be curtailed. - They will adopt styles of control that depend least on their ability to communicate with their subsidiary. Although there is adequate support for all of the above conclusions, on some key points the evidence of the Case Studies and Survey is contradictory. The thesis, therefore, closes with an agenda for further research that would address these inconsistencies.

An examination of the appropriateness of the contemporary strategic management models for the Greek small manufacturing enterprises

The starting point of the project was the observation that strategic management is absent in small businesses. The first objective of the project was to examine the reasons causing this situation in Greece, the second one, to examine the appropriateness of the contemporary models of strategic planning for the Greek S.M.E.s, and the third to examine the appropriateness of the alternative approaches to strategic management for the Greek S.M.E.s. The term appropriateness includes (a) the ability of managers to use the models and (b) the ability of the models to assist the managers. The results of the research indicate that none of the two above conditions exists, hence, it is suggested that the contemporary models of strategic management are inappropriate for the Greek S.M.E.s. Many previous research projects on the topic suggest that since the strategic decision making process in S.M.E.s is informal, the whole process is absent or ineffective. Current trends in S.M.E.s' strategic management do not consider the informality of the strategic decision making process as a kind of managerial illness, but as a managerial characteristic. The use of sophisticated data collection and analytical methods does not indicate successful strategic decisions, but it indicates the method large firms use to manage their strategy. According to the literature review, the S.M.E.s' managers avoid the use of the contemporary models of strategic management, because they do not have the knowledge, the resources or the time. Another thesis, expressed by some firms' specialists, suggests that small firms are different from large ones, hence their practice of strategic management should not follow the large firm's prototypes.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

The choice of the model in inventory control and the cost of sophistication

This thesis is concerned with the inventory control of items that can be considered independent of one another. The decisions when to order and in what quantity, are the controllable or independent variables in cost expressions which are minimised. The four systems considered are referred to as (Q, R), (nQ,R,T), (M,T) and (M,R,T). Wiith ((Q,R) a fixed quantity Q is ordered each time the order cover (i.e. stock in hand plus on order ) equals or falls below R, the re-order level. With the other three systems reviews are made only at intervals of T. With (nQ,R,T) an order for nQ is placed if on review the inventory cover is less than or equal to R, where n, which is an integer, is chosen at the time so that the new order cover just exceeds R. In (M, T) each order increases the order cover to M. Fnally in (M, R, T) when on review, order cover does not exceed R, enough is ordered to increase it to M. The (Q, R) system is examined at several levels of complexity, so that the theoretical savings in inventory costs obtained with more exact models could be compared with the increases in computational costs. Since the exact model was preferable for the (Q,R) system only exact models were derived for theoretical systems for the other three. Several methods of optimization were tried, but most were found inappropriate for the exact models because of non-convergence. However one method did work for each of the exact models. Demand is considered continuous, and with one exception, the distribution assumed is the normal distribution truncated so that demand is never less than zero. Shortages are assumed to result in backorders, not lost sales. However, the shortage cost is a function of three items, one of which, the backorder cost, may be either a linear, quadratic or an exponential function of the length of time of a backorder, with or without period of grace. Lead times are assumed constant or gamma distributed. Lastly, the actual supply quantity is allowed to be distributed. All the sets of equations were programmed for a KDF 9 computer and the computed performances of the four inventory control procedures are compared under each assurnption.