A techno-economic comparison of power production by biomass fast pyrolysis with gasification and combustion

This paper presents an assessment of the technical and economic performance of thermal processes to generate electricity from a wood chip feedstock by combustion, gasification and fast pyrolysis. The scope of the work begins with the delivery of a wood chip feedstock at a conversion plant and ends with the supply of electricity to the grid, incorporating wood chip preparation, thermal conversion, and electricity generation in dual fuel diesel engines. Net generating capacities of 1–20 MWe are evaluated. The techno-economic assessment is achieved through the development of a suite of models that are combined to give cost and performance data for the integrated system. The models include feed pretreatment, combustion, atmospheric and pressure gasification, fast pyrolysis with pyrolysis liquid storage and transport (an optional step in de-coupled systems) and diesel engine or turbine power generation. The models calculate system efficiencies, capital costs and production costs. An identical methodology is applied in the development of all the models so that all of the results are directly comparable. The electricity production costs have been calculated for 10th plant systems, indicating the costs that are achievable in the medium term after the high initial costs associated with novel technologies have reduced. The costs converge at the larger scale with the mean electricity price paid in the EU by a large consumer, and there is therefore potential for fast pyrolysis and diesel engine systems to sell electricity directly to large consumers or for on-site generation. However, competition will be fierce at all capacities since electricity production costs vary only slightly between the four biomass to electricity systems that are evaluated. Systems de-coupling is one way that the fast pyrolysis and diesel engine system can distinguish itself from the other conversion technologies. Evaluations in this work show that situations requiring several remote generators are much better served by a large fast pyrolysis plant that supplies fuel to de-coupled diesel engines than by constructing an entire close-coupled system at each generating site. Another advantage of de-coupling is that the fast pyrolysis conversion step and the diesel engine generation step can operate independently, with intermediate storage of the fast pyrolysis liquid fuel, increasing overall reliability. Peak load or seasonal power requirements would also benefit from de-coupling since a small fast pyrolysis plant could operate continuously to produce fuel that is stored for use in the engine on demand. Current electricity production costs for a fast pyrolysis and diesel engine system are 0.091/kWh at 1 MWe when learning effects are included. These systems are handicapped by the typical characteristics of a novel technology: high capital cost, high labour, and low reliability. As such the more established combustion and steam cycle produces lower cost electricity under current conditions. The fast pyrolysis and diesel engine system is a low capital cost option but it also suffers from relatively low system efficiency particularly at high capacities. This low efficiency is the result of a low conversion efficiency of feed energy into the pyrolysis liquid, because of the energy in the char by-product. A sensitivity analysis has highlighted the high impact on electricity production costs of the fast pyrolysis liquids yield. The liquids yield should be set realistically during design, and it should be maintained in practice by careful attention to plant operation and feed quality. Another problem is the high power consumption during feedstock grinding. Efficiencies may be enhanced in ablative fast pyrolysis which can tolerate a chipped feedstock. This has yet to be demonstrated at commercial scale. In summary, the fast pyrolysis and diesel engine system has great potential to generate electricity at a profit in the long term, and at a lower cost than any other biomass to electricity system at small scale. This future viability can only be achieved through the construction of early plant that could, in the short term, be more expensive than the combustion alternative. Profitability in the short term can best be achieved by exploiting niches in the market place and specific features of fast pyrolysis. These include: •countries or regions with fiscal incentives for renewable energy such as premium electricity prices or capital grants; •locations with high electricity prices so that electricity can be sold direct to large consumers or generated on-site by companies who wish to reduce their consumption from the grid; •waste disposal opportunities where feedstocks can attract a gate fee rather than incur a cost; •the ability to store fast pyrolysis liquids as a buffer against shutdowns or as a fuel for peak-load generating plant; •de-coupling opportunities where a large, single pyrolysis plant supplies fuel to several small and remote generators; •small-scale combined heat and power opportunities; •sales of the excess char, although a market has yet to be established for this by-product; and •potential co-production of speciality chemicals and fuel for power generation in fast pyrolysis systems.

Inscribing the organization:representations in dispute between accounting and production

This paper assumes that a primary function of management accounting is the representation of "accounting facts" for purposes such as organizational control. Accountants are able to offer conventional techniques of control, such as standard costing, as a consequence of their ability to deploy accounting representations within managerial and economic models of organizational processes. Accounting competes, at times, with other 'professional' groups, such as production planning or quality management people, in this role of representing the organization to management. The paper develops its arguments around a case illustration of cost accounting set in a low technology manufacturing environment. The research relates to a case organization in which accountants are attempting to establish the reliability of accounting inscriptions of a simple manufacturing process. The case research focuses on the documents, the inscriptions that vie for managements' attention. It is these sometimes messy and inaccurate representations which enable control of complex and heterogeneous activities at a distance. At the end of our site visits we observe quality management systems in the ascendancy over the accountants' standard costing systems. © 2006 Elsevier Ltd. All rights reserved.

Technical and economic simulation of biomass pyrolysis processes for fuels and electricity

There is considerable concern over the increased effect of fossil fuel usage on the environment and this concern has resulted in an effort to find alternative, environmentally friendly energy sources. Biomass is an available alternative resource which may be converted by flash pyrolysis to produce a crude liquid product that can be used directly to substitute for conventional fossil fuels or upgraded to a higher quality fuel. Both the crude and upgraded products may be utilised for power generation. A computer program, BLUNT, has been developed to model the flash pyrolysis of biomass with subsequent upgrading, refining or power production. The program assesses and compares the economic and technical opportunities for biomass thermochemical conversion on the same basis. BLUNT works by building up a selected processing route from a number of process steps through which the material passes sequentially. Each process step has a step model that calculates the mass and energy balances, the utilities usage and the capital cost for that step of the process. The results of the step models are combined to determine the performance of the whole conversion route. Sample results from the modelling are presented in this thesis. Due to the large number of possible combinations of feeds, conversion processes, products and sensitivity analyses a complete set of results is impractical to present in a single publication. Variation of the production costs for the available products have been illustrated based on the cost of a wood feedstock. The effect of selected macroeconomic factors on the production costs of bio-diesel and gasoline are also given.

The influence of political, economic and passenger market factors on international civil aviation

Civil aviation plays an essential role in maintaining international communications. Many extraneous factors influence the daily operations of the air transport industry. This thesis begins by investigating the major categories of so­ called "external interests" in civil aviation. These are shown to have played a significant part in ensuring the need for international agreement over the adoption of regulating principles. The combination and interaction of the various influences has produced a particular type of regulatory environment in which all commercial air services have to operate. The need for such regulation and the extreme difficulty experienced in trying to define universally acceptable methods of supervision is discussed. It is shown how opportunity for the development of on-scheduled air services was created by default on the part of the European Governments.The concept of so-called "scheduled" and "non-scheduled" sectors" is considered and it is suggested that growth of the inclusive tour industry resulted from inappropriate categorisation of the air services involved. The means by which development opportunities were created for inclusive tour operations is considered and the work then investigates the importance of British air transport policy in their exploitation. The politics of British civil aviation in the post-war years is the subject of detailed examination and the process by which Independent airlines were encouraged to develop inclusive tours, is identified. This theme is expanded to demonstrate the vital contribution of British air transport policy in the restructuring of the international industry. The subsequent involvement of the United States is shown to have been directed specifically towards the satisfaction of domestic issues. British objectives, however, are considered to have been more generally concerned with improving the tariff structure. The unique opportunities for British experimentation with international fares are seen to have major influence in forcing the pace of tariff rationalisation.

Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels

Biomass-To-Liquid (BTL) is one of the most promising low carbon processes available to support the expanding transportation sector. This multi-step process produces hydrocarbon fuels from biomass, the so-called “second generation biofuels” that, unlike first generation biofuels, have the ability to make use of a wider range of biomass feedstock than just plant oils and sugar/starch components. A BTL process based on gasification has yet to be commercialized. This work focuses on the techno-economic feasibility of nine BTL plants. The scope was limited to hydrocarbon products as these can be readily incorporated and integrated into conventional markets and supply chains. The evaluated BTL systems were based on pressurised oxygen gasification of wood biomass or bio-oil and they were characterised by different fuel synthesis processes including: Fischer-Tropsch synthesis, the Methanol to Gasoline (MTG) process and the Topsoe Integrated Gasoline (TIGAS) synthesis. This was the first time that these three fuel synthesis technologies were compared in a single, consistent evaluation. The selected process concepts were modelled using the process simulation software IPSEpro to determine mass balances, energy balances and product distributions. For each BTL concept, a cost model was developed in MS Excel to estimate capital, operating and production costs. An uncertainty analysis based on the Monte Carlo statistical method, was also carried out to examine how the uncertainty in the input parameters of the cost model could affect the output (i.e. production cost) of the model. This was the first time that an uncertainty analysis was included in a published techno-economic assessment study of BTL systems. It was found that bio-oil gasification cannot currently compete with solid biomass gasification due to the lower efficiencies and higher costs associated with the additional thermal conversion step of fast pyrolysis. Fischer-Tropsch synthesis was the most promising fuel synthesis technology for commercial production of liquid hydrocarbon fuels since it achieved higher efficiencies and lower costs than TIGAS and MTG. None of the BTL systems were competitive with conventional fossil fuel plants. However, if government tax take was reduced by approximately 33% or a subsidy of £55/t dry biomass was available, transport biofuels could be competitive with conventional fuels. Large scale biofuel production may be possible in the long term through subsidies, fuels price rises and legislation.

Germany as the EU's reluctant hegemon? Of economic strength and political constraints

This article explores the growing perception, prompted by the eurozone crisis, of Germany as a hegemonic power in the European Union. The article explores the realignments in the power balance within the European Union (EU) by making an original application of the insights from the literature on hegemony. It reviews the evidence for Germany playing a hegemonic role, but then emphasizes three sets of constraints. First, German pre-eminence is largely confined to the economic sphere. Even in this area Germany has not acted fully in line with the role ascribed by hegemonic stability theory. Second, its pre-eminence in the EU encounters problems of international legitimacy. Third, growing constraints arising from German domestic politics further hamper playing the role of hegemon. In consequence, Germany is intrinsically a reluctant hegemon: one whose economic leadership is recognized but politically contested. The conclusion considers the significance of these findings on the EU's most important member state. © 2013 Taylor & Francis.

Adding constrained discontinuities to Gaussian process models of wind fields

Gaussian Processes provide good prior models for spatial data, but can be too smooth. In many physical situations there are discontinuities along bounding surfaces, for example fronts in near-surface wind fields. We describe a modelling method for such a constrained discontinuity and demonstrate how to infer the model parameters in wind fields with MCMC sampling.

Adding constrained discontinuities to Gaussian process models of wind fields

Gaussian Processes provide good prior models for spatial data, but can be too smooth. In many physical situations there are discontinuities along bounding surfaces, for example fronts in near-surface wind fields. We describe a modelling method for such a constrained discontinuity and demonstrate how to infer the model parameters in wind fields with MCMC sampling.

Mathematical modelling and optimal multivariable control of chemical processes

This work reports the developnent of a mathenatical model and distributed, multi variable computer-control for a pilot plant double-effect climbing-film evaporator. A distributed-parameter model of the plant has been developed and the time-domain model transformed into the Laplace domain. The model has been further transformed into an integral domain conforming to an algebraic ring of polynomials, to eliminate the transcendental terms which arise in the Laplace domain due to the distributed nature of the plant model. This has made possible the application of linear control theories to a set of linear-partial differential equations. The models obtained have well tracked the experimental results of the plant. A distributed-computer network has been interfaced with the plant to implement digital controllers in a hierarchical structure. A modern rnultivariable Wiener-Hopf controller has been applled to the plant model. The application has revealed a limitation condition that the plant matrix should be positive-definite along the infinite frequency axis. A new multi variable control theory has emerged fram this study, which avoids the above limitation. The controller has the structure of the modern Wiener-Hopf controller, but with a unique feature enabling a designer to specify the closed-loop poles in advance and to shape the sensitivity matrix as required. In this way, the method treats directly the interaction problems found in the chemical processes with good tracking and regulation performances. Though the ability of the analytical design methods to determine once and for all whether a given set of specifications can be met is one of its chief advantages over the conventional trial-and-error design procedures. However, one disadvantage that offsets to some degree the enormous advantages is the relatively complicated algebra that must be employed in working out all but the simplest problem. Mathematical algorithms and computer software have been developed to treat some of the mathematical operations defined over the integral domain, such as matrix fraction description, spectral factorization, the Bezout identity, and the general manipulation of polynomial matrices. Hence, the design problems of Wiener-Hopf type of controllers and other similar algebraic design methods can be easily solved.

Dynamic simulation of chemical processes

This thesis describes the design and implementation of an interactive dynamic simulator called DASPRII. The starting point of this research has been an existing dynamic simulation package, DASP. DASPII is written in standard FORTRAN 77 and is implemented on universally available IBM-PC or compatible machines. It provides a means for the analysis and design of chemical processes. Industrial interest in dynamic simulation has increased due to the recent increase in concern over plant operability, resiliency and safety. DASPII is an equation oriented simulation package which allows solution of dynamic and steady state equations. The steady state can be used to initialise the dynamic simulation. A robust non linear algebraic equation solver has been implemented for steady state solution. This has increased the general robustness of DASPII, compared to DASP. A graphical front end is used to generate the process flowsheet topology from a user constructed diagram of the process. A conversational interface is used to interrogate the user with the aid of a database, to complete the topological information. An original modelling strategy implemented in DASPII provides a simple mechanism for parameter switching which creates a more flexible simulation environment. The problem description generated is by a further conversational procedure using a data-base. The model format used allows the same model equations to be used for dynamic and steady state solution. All the useful features of DASPI are retained in DASPII. The program has been demonstrated and verified using a number of example problems, Significant improvements using the new NLAE solver have been shown. Topics requiring further research are described. The benefits of variable switching in models has been demonstrated with a literature problem.

Managerial cognitions in technological innovation processes:a study of interpretative processes

In this research, conceptualizations of the links between technological innovation and organizational change are explored and recommendations in the literature concerning such changes are reviewed and criticized. Such recommendations do not usually address the details of social interactions by which organizational changes take place. As a consequence, the issue of how these recommendations become relevant for the actors who would carry them out is not addressed. The complexity of organizational change processes highlights the role of actors' interpretations of organizational reality. Interpretations take place through the use of language in the interaction between actors. Theoretical contributions and recommendations concerning organizational changes should be seen therefore as discourses which contribute to these interpretations. They will influence the process of change only if they become relevant for organizational actors'. A method for analysing discourse in organizations is presented. It is used to identify the variety of discourses which are put forward in organizations, and to describe the structure of their distribution among actors. The structures of discourses in three companies suggest that knowledge about technological innovation processes becomes relevant to the extent that it contributes to political/discursive processes maintained by actors attempting to secure or change their role definitions. It follows that recommendations concerning planned organizational change should take into account these processes explicitly. It is therefore suggested that the analysis of discourse can be a valuable instrument for monitoring change processes. Suggestions for further research are made, concerning (i) the development of the method itself and its use in real situations (ii) the study of how discourse structures evolve over time and episodes of change.

Consumer trial, continuous use, and economic benefits of a retail service innovation:the case of the personal shopping assistant

Service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific self-service technology (SST), the personal shopping assistant (PSA), and estimates retailer benefits from implementing that innovation. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the technology acceptance model (TAM), this study develops specific hypotheses and tests them on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device. Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. Incorporation of technology within physical stores affords opportunities for the retailer to reduce costs, while enhancing service provided to consumers. Therefore, service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific SST in the retail context, the PSA, and estimates retailer benefits from implementing that innovation. In so doing, the study contributes to the nascent area of research on SSTs in the retail sector. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the TAM, this study develops specific hypotheses regarding the (1) antecedent effects of technological anxiety, novelty seeking, market mavenism, and trust in the retailer on trial of the service innovation; (2) the effects of ease of use, perceived waiting time, and need for interaction on continuous use of the innovation; and (3) the effect of use of innovation on consumer spending at the store. The hypotheses were tested on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device, one of the early adopters of PSA in Germany. Data were analyzed using logistic regression (antecedents of trial), multiple regression (antecedents of continuous use), and propensity score matching (assessing retailer benefits). Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use, while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. The study contributes to the literature through its (1) simultaneous examination of antecedents of trial and continuous usage of a specific SST, (2) the demonstration of economic benefits of SST introduction for the retailer, and (3) contribution to the stream of research on service innovation, as against product innovation.

Making sense of the ‘difficult’ past:transmission of political heritage and memory-work among young people across Europe

This article considers young people’s socialization into mnemonic communities in 14 European countries. It argues that such socialization is an intersubjective and selective process that, to a great degree, depends on the particular social environment that conditions the discourses on pasts available to young people. Drawing on memory studies, it recognizes memory as a valid alternative to the institutionalized past (history) but envisages the two as inextricably connected. Given this, it identifies several strategies adopted by young people in order to socialize understandings of the past. While these strategies vary, some reveal receptivity to populist and far right ideologies. Our study demonstrates how internalization of political heritage via mnemonic socialization within families is conditioned by both the national political agenda and socio-economic situation experienced across Europe.