'In reality it's almost impossible':CLT-oriented curriculum change

Curriculum innovation is challenging and, as several commentators have reported, moves to introduce communicative language teaching in many contexts internationally have resulted in mixed outcomes, or even failure. In an effort to shed some light on this complex problem, this article focuses on curriculum change through the introduction of new communicative textbooks in an engineering college (kosen) in Japan. First, three key factors that inhibit change are considered and then other factors that specifically hindered change in the kosen environment are identified. A study investigating the attitudes and classroom practices of four Japanese teachers of English highlighted a culture of pedagogical uncertainty and lack of professional support. Suggestions for supporting teachers to implement curriculum change more effectively, both in Japan and elsewhere, are drawn out.

What is English for? Language structure and the curriculum for English

This article uses Bernstein’s theory of pedagogic discourse to account for both the processes by which curriculum change occurs and the failure of efforts to introduce meaningful attention to language structure into national curricula.

Managing change in China:a study of Chinese organisational cultures and management styles

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Organisational learning, climate change and the tragedy of the commons in China

This paper ends with a brief discussion of climate change and suggests that a practical solution would be to transfer much of the current air, sea and long-haul trucking of intercontinental freight between China and Europe (and the USA) to maglev systems. First we review the potential of Asian knowledge management and organisational learning and contrast this against Western precepts finding that there seems to be little incentive to 'look after one's fellows' in China (and perhaps across Asia) outside of tight personal guanxi networks. This is likely to be the case in the intense production regions of China where little time is allowed for 'organisational learning' by the staff and there is little incentive to initiate 'knowledge management' by senior managers. Thus the 'tragedy of the commons' will be enacted by individuals, township, and provincial leaders upwards to top ministers - no one will care for the climate or pollution, only for their own group and their wealth creation prospects. Copyright © 2011 Inderscience Enterprises Ltd.

Privatisation, state ownership and productivity:evidence from China

This paper examines the relationship between the transfer of ownership between the public and private sectors of Chinese industry, and its impacts on performance. We link ownership changes to productivity growth, and demonstrate that privatisation contributes significantly. We offer an extension that is generally ignored in the literature, in looking at firms that are taken back into state ownership, and evaluating the productivity growth effects of this. Further, we highlight the well-understood simultaneity problems, and demonstrate the hazard of ignoring the issue by comparing various estimators, including the modified control function approach. In general, the results stress the importance of allowing for such endogeneity when evaluating the productivity effects of ownership change.

International and intranational technological spillovers and productivity growth in China

Technological spillovers from foreign direct investment (FDI) have been regarded as a major source of technical progress and productivity growth. This paper explores the role of international and intranational technological spillovers from FDI in technical change, efficiency improvement, and total factor productivity growth in Chinese manufacturing firms using a recent Chinese manufacturing firm-level panel data set over the 2001–05 period. International industry-specific research and development (R&D) stock is linked to the Chinese firm-level data, international R&D spillovers from FDI and intranational technological spillovers of R&D activities by foreign invested firms in China are examined as well. Policy implications are discussed.

Grammar in the curriculum for English: what next?

It is clear from several government reports and research papers published recently, that the curriculum for English in primary and secondary schools is about to change, yet again. After years of a bureaucratic stranglehold that has left even Ofsted report writers criticising the teaching of English, it seems as if the conditions are right for further revisions. One of the questions that inevitably arises when a curriculum for English is reviewed, relates to the place and purpose of the teaching of grammar. This paper outlines a possible curriculum for grammar across both primary and secondary phases, arguing that for the teaching of grammar to have any salience or purpose at all, it has to be integrated into the curriculum as a whole, and not just that of writing. A recontextualised curriculum for grammar of the kind proposed here, would teach pupils to become critically literate in ways which recognise diversity as well as unity, and with the aim of providing them with the means to critically analyse and appraise the culture in which they live.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the role of indigenous and foreign innovation efforts in technological upgrading in developing countries, taking into account sectoral specificities in technical change. Using a Chinese firm-level panel dataset covering 2001–05, the paper decomposes productivity growth into technical change and efficiency improvement and examines the impact of indigenous and foreign innovation efforts on these changes. Indigenous firms are found to be the leading force on the technological frontier in the low- and medium-technology industries, while foreign-invested firms enjoy a clear lead in the high-technology sector. Collective indigenous R&D activities at the industry level are found to be the major driver of technology upgrading of indigenous firms that push out the technology frontier. While foreign investment appears to contribute to static industry capabilities, R&D activities of foreign-invested firms have exerted a significant negative effect on the technical change of local firms over the sample period.

Productivity in China's high technology industry:regional heterogeneity and R&D

This paper analyzes the impact of Research and Development (R&D) on the productivity of China's high technology industry. In order to capture important differences in the effect of R&D on output that arise from geographic and socioeconomic differences across three major regions in China, we use a novel semiparametric approach that allows us to model heterogeneities across provinces and time. Using a unique provincial level panel dataset spanning the period 2000–2007, we find that the impact of R&D on output varies substantially in terms of magnitude and significance across different regions. Results show that the eastern region benefits the most from R&D investments, however it benefits the least from technical progress, while the western region benefits the least from R&D investments, but enjoys the highest benefits from technical progress. The central region benefits from R&D investments more than the western region and benefits from technical progress more than the eastern region. Our results suggest that R&D investments would significantly increase output in both the eastern and central regions, however technical progress in the central region may further compound the effects of R&D on output within the region.

Absorptive capacity and the benefits from global reservoirs of knowledge:evidence from a linked China-OECD dataset

This paper investigates the role of absorptive capacity in the diffusion of global technology with sector and firm heterogeneity. We construct the FDI-intensity weighted global R&D stock for each industry and link it to Chinese firm-level panel data relating to 53,981 firms over the period 2001-2005. Non-parametric frontier analysis is employed to explore how absorptive capacity affects technical change and catch-up in the presence of global knowledge spillovers. We find that R&D activities and training at individual firms serve as an effective source of absorptive capability. The contribution of absorptive capacity varies according to the type of FDI and the extent of openness.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the drivers of technology upgrading in emerging economies using a recent Chinese firm-level panel dataset over the 2001-2005 period. It extends the Directed Technical Change theory by considering differences in technology intensities across industries within a country; examines the drivers of technical change, efficiency improvement and TFP growth in Chinese manufacturing firms; and explores the roles of indigenous innovations and foreign technology. It finds that FDI contributes to static industry capabilities by advanced technologies embedded in imported machineries, but not to dynamic technological capabilities of indigenous firms in developing countries. Collective indigenous R&D activities at industry level are the major driver of technology upgrading of indigenous firms that push up the technology frontier. Policy implications are discussed.

Nondestructive measurement of water content and moisture migration of unsaturated red clays in South China

To reveal the moisture migration mechanism of the unsaturated red clays, which are sensitive to water content change and widely distributed in South China, and then rationally use them as a filling material for highway embankments, a method to measure the water content of red clay cylinders using X-ray computed tomography (CT) was proposed and verified. Then, studies on the moisture migrations in the red clays under the rainfall and ground water level were performed at different degrees of compaction. The results show that the relationship between dry density, water content, and CT value determined from X-ray CT tests can be used to nondestructively measure the water content of red clay cylinders at different migration time, which avoids the error reduced by the sample-to-sample variation. The rainfall, ground water level, and degree of compaction are factors that can significantly affect the moisture migration distance and migration rate. Some techniques, such as lowering groundwater table and increasing degree of compaction of the red clays, can be used to prevent or delay the moisture migration in highway embankments filled with red clays.

Rethinking change:downsizing businesses, changing behaviours and still managing to come out on top

As an indicator of global change and shifting balances of power, every September in Dalian, China, the World Economic Forum meets. The subject in 2011 – Mastering Quality Growth. On the agenda is pursuing new frontiers of growth linked to embracing disruptive innovation. With growth coming from emerging markets, and European and North American economies treading water, many firms in the West are facing the reality of having to not just downsize but actually close manufacturing operations and re-open them elsewhere, where costs are lower, to remain competitive. There are thousands of books on “change management”. Yet very few of these devote much time to downsizing preferring to talk about re-engineering or restructuring. What lessons are available from the past to achieve a positive outcome from what will inevitably be something of a human, as well as an economic, tragedy. The authors reached three fundamental conclusions from their experience and research in facility closure management within Vauxhall, UK: put your people first, make sure you keep running the business and manage your legacy. They devlop the ideas into a new business model linked to the emotions of change.

Transforming the relationship between staff and students to effect change

This opinion piece argues for the necessity of student-staff partnerships that go beyond the common rhetoric of ‘student engagement’, achieving a richer student and staff dialogue which results in more meaningful change in policy and practice. In particular, attention is drawn to the need for such partnerships when determining technology applications that are often missed out from, or treated in isolation from, the curriculum design process. This piece cites, as an example, a student-led taught day on the Post Graduate Diploma in Learning and Teaching at Aston University in July 2015. There was clear evidence that the staff participants designed their assessments with student partners in mind. It is therefore proposed that a partnership relationship offers an effective means of moving forward from common practices where technology simply replicates, or supplements, traditional activities.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.