Investigating the current and future use of it by 3PL providers in europe and the far east

The paper investigates the role of current and future IT applications in 3PL services in Europe and the Far East. For clients' competitive advantage, 3PL providers increasingly contribute IT systems to logistics, helping 3PL providers to enhance supply chain collaboration with business partners. Through qualitative interviews, questionnaires and secondary data analysis, common attributes of both regions' IT systems are identified which enable supply chain partners to collaborate and share information. Most companies already implement IT systems for processing transactions, but recognized motivations and barriers remain, since 3PL providers incompletely understand clients' IT requirements. Long-term productivity gains require sophisticated IT systems to streamline cycles and improve supply chain visibility, thus facilitating planning and decision-making.

The potential use of bio-ultracarbofluids in a standard diesel engine

The replacement of diesel fuel by ultra-carbofluids was perceived to offer the potential to decrease the emissions of environmental pollutants such as carbon dioxide, carbon monoxide, hydrocarbons (HC's) and smoke. Such ultracarbofluids consist of a suspension of coal in fuel oil and water generally in the ratio of 5: 3: 2 plus a small amount of stabilising additive. The literature relating to the economies of coal and fuel oil production, and the production and properties of charcoal and vegetable oils has been critically reviewed. The potential use of charcoal and vegetable oils as replacements for coal and fuel oil are discussed. An experimental investigation was undertaken using novel bio-ultracarbofluid formulations. These differed from an ultracarbofluid by having bio-renewable charcoal and vegetable oil in place of coal and fuel oil. Tests were made with a Lister-Petter 600cc 2-cylinder, 4-stroke diesel engine fitted with a Heenan-Froude DPX 1 water brake dynamometer to measure brake power output, and Mexa-321E and Mexa-211E analysers to measure exhaust pollutants. Measurements were made of engine brake power output, carbon dioxide, carbon monoxide, hydrocarbons and smoke emissions over the speed range 1000 to 3000 rpm at 200 rpm intervals. The results were compared with those obtained with a standard diesel reference fuel. All the bio-ultracarbofluid formulations produced lower brake power outputs (i.e. 5.6% to 20.7% less brake power) but substantially improved exhaust emissions of CO2, CO, HC's and smoke. The major factor in the formulation was found to be the type and amount of charcoal; charcoal with a high volatile content (27.2%) and present at 30% by mass yielded the best results, i.e. only slightly lower brake power output and significantly lower exhaust pollutants.

Current and future uses of IT in Europe and the Far East:achieving competitive advantage with 3PL

Current and future IT applications effecting supply chains in Europe and Pacific Asia are investigated. 3PL providers increasingly use IT systems for logistics, to enhance supply chain collaboration with business partners. Advanced systems are not always immediately profi table. Most companies already implement IT systems for processing transactions but motivations vary and barriers remain since 3PL providers incompletely understand clients' IT requirements. Long-term productivity gains require sophisticated IT systems to streamline cycles and improve supply chain visibility to facilitate, plan and make decisions. RFID and advanced integration systems, including Business Process Management, are probably the next trend in IT logistics systems. Copyright © 2012 Inderscience Enterprises Ltd.

Teacher participation in school management : an analysis of some major issues, background factors, and the use of an attitude scale to study and compare teacher attitudes to participation

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Bridging large and small scales of water models using hybrid Molecular Dynamics/Fluctuating Hydrodynamics framework

This thesis presents a two-dimensional water model investigation and development of a multiscale method for the modelling of large systems, such as virus in water or peptide immersed in the solvent. We have implemented a two-dimensional ‘Mercedes Benz’ (MB) or BN2D water model using Molecular Dynamics. We have studied its dynamical and structural properties dependence on the model’s parameters. For the first time we derived formulas to calculate thermodynamic properties of the MB model in the microcanonical (NVE) ensemble. We also derived equations of motion in the isothermal–isobaric (NPT) ensemble. We have analysed the rotational degree of freedom of the model in both ensembles. We have developed and implemented a self-consistent multiscale method, which is able to communicate micro- and macro- scales. This multiscale method assumes, that matter consists of the two phases. One phase is related to micro- and the other to macroscale. We simulate the macro scale using Landau Lifshitz-Fluctuating Hydrodynamics, while we describe the microscale using Molecular Dynamics. We have demonstrated that the communication between the disparate scales is possible without introduction of fictitious interface or approximations which reduce the accuracy of the information exchange between the scales. We have investigated control parameters, which were introduced to control the contribution of each phases to the matter behaviour. We have shown, that microscales inherit dynamical properties of the macroscales and vice versa, depending on the concentration of each phase. We have shown, that Radial Distribution Function is not altered and velocity autocorrelation functions are gradually transformed, from Molecular Dynamics to Fluctuating Hydrodynamics description, when phase balance is changed. In this work we test our multiscale method for the liquid argon, BN2D and SPC/E water models. For the SPC/E water model we investigate microscale fluctuations which are computed using advanced mapping technique of the small scales to the large scales, which was developed by Voulgarakisand et. al.

Consumer trial, continuous use, and economic benefits of a retail service innovation:the case of the personal shopping assistant

Service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific self-service technology (SST), the personal shopping assistant (PSA), and estimates retailer benefits from implementing that innovation. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the technology acceptance model (TAM), this study develops specific hypotheses and tests them on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device. Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. Incorporation of technology within physical stores affords opportunities for the retailer to reduce costs, while enhancing service provided to consumers. Therefore, service innovations in retailing have the potential to benefit consumers as well as retailers. This research models key factors associated with the trial and continuous use of a specific SST in the retail context, the PSA, and estimates retailer benefits from implementing that innovation. In so doing, the study contributes to the nascent area of research on SSTs in the retail sector. Based on theoretical insights from prior SST studies, diffusion of innovation literature, and the TAM, this study develops specific hypotheses regarding the (1) antecedent effects of technological anxiety, novelty seeking, market mavenism, and trust in the retailer on trial of the service innovation; (2) the effects of ease of use, perceived waiting time, and need for interaction on continuous use of the innovation; and (3) the effect of use of innovation on consumer spending at the store. The hypotheses were tested on a sample of 104 actual users of the PSA and 345 nonusers who shopped at the retail store offering the PSA device, one of the early adopters of PSA in Germany. Data were analyzed using logistic regression (antecedents of trial), multiple regression (antecedents of continuous use), and propensity score matching (assessing retailer benefits). Results indicate that factors affecting initial trial are different from those affecting continuous use. More specifically, consumers' trust toward the retailer, novelty seeking, and market mavenism are positively related to trial, while technology anxiety hinders the likelihood of trying the PSA. Perceived ease of use of the device positively impacts continuous use, while consumers' need for interaction in shopping environments reduces the likelihood of continuous use. Importantly, there is evidence on retailer benefits from introducing the innovation since consumers using the PSA tend to spend more during each shopping trip. However, given the high costs of technology, the payback period for recovery of investments in innovation depends largely upon continued use of the innovation by consumers. Important implications are provided for retailers considering investments in new in-store service innovations. The study contributes to the literature through its (1) simultaneous examination of antecedents of trial and continuous usage of a specific SST, (2) the demonstration of economic benefits of SST introduction for the retailer, and (3) contribution to the stream of research on service innovation, as against product innovation.

Cellular uptake and biological activity of synthetic hammerhead ribozymes

Glioblastoma Multiforme (GBM) is a highly malignant form of brain cancer for which there is no effective cure. The over-expression of a number of genes, including the epidermal growth factor receptor (EGFr), has been implicated as a causative factor of tumourigenesis. Ribozymes are a class of ribonucleic acid that possess enzymatic properties. They can inhibit gene-expression in a highly sequence specific manner by catalysing the trans-cleavage of target RNA. The potential use of synthetic hammerhead ribozymes as novel anti-brain tumour agents was investigated in this study. The successful use of synthetic, exogenously administered ribozymes for such applications will require chemical modifications that improve biological stability and a fundamental understanding of cellular uptake mechanisms. Chimeric 2'-O-methylated hammerhead ribozymes proved to be significantly more stable (>4000-fold) in serum than unmodified RNA ribozymes and exhibited high in vitro catalytic activity. The cellular association of an internally [32P]-labelled 2'-O-methylated chimeric ribozyme in U87-MG human glioma cells was temperature-, energy- and pH-dependent and involved an active process that could be competed with a variety of polyanions. Indications are that the predominant mechanism of uptake is by adsorptive and / or receptor mediated endocytosis. Twenty 2'-O-methylated chimeric ribozymes were designed to cleave various sites along the EGFr mRNA. In vitro, 18 ribozymes exhibited high activity in cleaving a complementary short substrate. Using LipofectAMINETM as a delivery agent, the efficacy of these ribozymes was evaluated in the A431 cell line, which expresses amplified levels of EGFr. Studies revealed that although the ribozymes were taken up by the cells and remained stable over a period of 4 days, no significant reduction in either EGFr expression or cell proliferation was evident. The presence of telomerase, a ribonucleoprotein responsible for telomere elongation, has been strongly associated with tumour progression. The biological activity of a 2'-O-methylated ribozyme targeted against the RNA component of telomerase was determined. The ribozyme exhibited specific dose-dependent inhibition of telomerase activity in U87-MG cell lysates with an IC50 of –4μM. When 4μM ribozyme was delivered to intact U87-MG cells, complexed to LipofectAMINETM, telomerase activity was significantly reduced to 74.5±4.17% of the untreated control. Free ribozyme showed no significant inhibitory effect demonstrating the importance of an appropriate delivery system for optimum delivery of exogenously administered ribozymes.

Fish farm effluent control and the development of an expert system

In recent years, freshwater fish farmers have come under increasing pressure from the Water Authorities to control the quality of their farm effluents. This project aimed to investigate methods of treating aquacultural effluent in an efficient and cost-effective manner, and to incorporate the knowledge gained into an Expert System which could then be used in an advice service to farmers. From the results of this research it was established that sedimentation and the use of low pollution diets are the only cost effective methods of controlling the quality of fish farm effluents. Settlement has been extensively investigated and it was found that the removal of suspended solids in a settlement pond is only likely to be effective if the inlet solids concentration is in excess of 8 mg/litre. The probability of good settlement can be enhanced by keeping the ratio of length/retention time (a form of mean fluid velocity) below 4.0 metres/minute. The removal of BOD requires inlet solids concentrations in excess of 20 mg/litre to be effective, and this is seldom attained on commercial fish farms. Settlement, generally, does not remove appreciable quantities of ammonia from effluents, but algae can absorb ammonia by nutrient uptake under certain conditions. The use of low pollution, high performance diets gives pollutant yields which are low when compared with published figures obtained by many previous workers. Two Expert Systems were constructed, both of which diagnose possible causes of poor effluent quality on fish farms and suggest solutions. The first system uses knowledge gained from a literature review and the second employs the knowledge obtained from this project's experimental work. Consent details for over 100 fish farms were obtained from the public registers kept by the Water Authorities. Large variations in policy from one Authority to the next were found. These data have been compiled in a computer file for ease of comparison.

Assessment of physical and hydrological properties of biological soil crusts using x-ray microtomography and modelling

Biological soil crusts (BSCs) are formed by aggregates of soil particles and communities of microbial organisms and are common in all drylands. The role of BSCs on infiltration remains uncertain due to the lack of data on their role in affecting soil physical properties such as porosity and structure. Quantitative assessment of these properties is primarily hindered by the fragile nature of the crusts. Here we show how the use of a combination of non-destructive imaging X-ray microtomography (XMT) and Lattice Boltzmann method (LBM) enables quantification of key soil physical parameters and the modeling of water flow through BSCs samples from Kalahari Sands, Botswana. We quantify porosity and flow changes as a result of mechanical disturbance of such a fragile cyanobacteria-dominated crust. Results show significant variations in porosity between different types of crusts and how they affect the flow and that disturbance of a cyanobacteria-dominated crust results in the breakdown of larger pore spaces and reduces flow rates through the surface layer. We conclude that the XMT–LBM approach is well suited for study of fragile surface crust samples where physical and hydraulic properties cannot be easily quantified using conventional methods.

Increasing the use of simulation in business

The nature of Discrete-Event Simulation (DES) and the use of DES in organisations is changing. Two important developments are the use of Visual Interactive Modelling systems and the use of DES in Business Process Management (BPM) projects. Survey research is presented that shows that despite these developments usage of DES remains relatively low due to a lack of knowledge of the benefits of the technique. This paper considers two factors that could lead to a greater achievement and appreciation of the full benefit of DES and thus lead to greater usage. Firstly in relation to using DES to investigate social systems, both in the process of undertaking a simulation project and in the interpretation of the findings a 'soft' approach may generate more knowledge from the DES intervention and thus increase its benefit to businesses. Secondly in order to assess the full range of outcomes of DES the technique could be considered from the perspective of an information processing tool within the organisation. This will allow outcomes to be considered under the three modes of organisational information use of sense making, knowledge creating and decision making which relate to the theoretical areas of knowledge management, organisational learning and decision making respectively. The association of DES with these popular techniques could further increase its usage in business.

Enabling a simulation capability in the organisation

Enabling a Simulation Capability in the Organisation addresses the application of simulation modelling techniques in order to enable better informed decisions in business and industrial organisations. The book’s unique approach treats simulation not just as a technical tool, but within as a support for organisational decision making, showing the results from a survey of current and potential users of simulation to suggest reasons why the technique is not used as much as it should be and what are the barriers to its further use. By incorporating an evaluation of six detailed case studies of the application of simulation in industry by the author, the book will teach readers: •the role of simulation in decision making; •how to introduce simulation as a tool for decision making; and •how to undertake simulation studies that lead to change in the organisation. Enabling a Simulation Capability in the Organisation provides an introduction to the state of the art in simulation modelling for researchers in business studies and engineering, as well a useful guide to practitioners and managers in business and industry.

The evolution of logistics service providers and the role of Internet-based applications in facilitating global operations

The need for global logistics services has increased dramatically and become extremely complex and dynamic as a result of a number of changes in manufacturing and in industrial production. In response, the logistics industry is changing in a variety of ways, including mergers to form integrated transportation service providers, outsourcing and increased use of information technology. The aim of this chapter is to provide an overview of the evolution and the most important trends in the logistics services provider (LSP) industry. Specific emphasis will be given to the role of Internet-based applications. Within this context, the chapter will also present the role of logistics e-marketplaces. In particular, based on the secondary research of currently existing logistics on-line marketplaces, an analysis and classification of them is provided with the aim of identifying service gaps. The analysis reveals that logistics electronic marketplaces, despite the increased range of services currently offered, still face limitations with reference to integrated customs links or translation services, which both reduce the efficiency of global operations.

Discourses of friendship between heterosexual women and gay men:mythical norms and an absence of desire

Gay men and heterosexual women may share some common interests in critiquing hetero-patriarchy. However feminism and gay liberationist politics do not always coincide and the role of individual subjectivities in recognising oppressive discourses of normativity remains debated. Interviews were conducted with seven friendship dyads of heterosexual women and gay men. Transcripts were subjected to discourse analysis, which suggested extensive management of heterosexist norms in the friends' accounts of friendship. The analysis highlighted ambiguity over the 'male' status of gay men, a concern with constructing the friendships as legitimately asexual, and the use of parody in the face of homophobia to disrupt normative assumptions. Although we primarily considered the role of heterosexist discourses, there is also evidence that other dimensions of non-normativity (for example, gender and ethnicity) are implicated in friendships constructed around shared otherness and mutual non-normativity. © 2010 SAGE.