Adjusting to institutional realities: the 2006 NGO law and its effects on civil society in Russia

Key findings: The paper investigates the impact that the legislative changes of 2006 had on civil society in Russia. This legislation has change the regulatory environment in which civil society actors such as Third Sector Organisations operate. Using the past development of civil society organisations as well as insights about how the institutional environment influences this article illustrates: - the undemocratic nature and motivation of the law and how it exploits the structural weaknesses of civil society - how Third Sector Organisations rationalise and translate the legislative changes into their organisational realities and how this changed or did not change their behaviour - the shift in state-civil society relations away from liberal co-existence into more hierarchical arrangements were Third Sector Organisations are subordinated to the state. These trends have far reaching implications for civil society. The empirical evidence shows that state now manages civil society to meet its own political ends. It also shows that organisations in the field welcome the more engage and directive nature of the Russian state. Why is this important? What does it mean for business or other users? Are there policy implications? The research is important as it shows how Third Sector Organisations have reacted to the legislative changes. Further it provides a basis for interpretation of the potential future development of civil society. Additional it highlights how the continuous process of democratisation in transition economies sometimes might come unstuck. In particular donor agencies will need to consider these trends when disturbing funding to Third Sector Organisations.

Auctions law and practice

This is the new edition of the leading work on the law and practice of auctions. The book looks at every aspect of auction practice from the economics of auction sales and restrictions on trading to criminal and other liabilities of the auctioneer. There is also a chapter on VAT. There have been important recent developments in the field of consumer protection and the book has been substantially revised to reflect these. In addition to general updating the new edition considers the practice of online auctions for the first time. There is also a section on looted art . The book continues to draw on case law from other common law jurisdictions.

Computer-aided categorisation and quantification of connectives in English and Arabic (based on newspaper text corpora).

This study presents a detailed contrastive description of the textual functioning of connectives in English and Arabic. Particular emphasis is placed on the organisational force of connectives and their role in sustaining cohesion. The description is intended as a contribution for a better understanding of the variations in the dominant tendencies for text organisation in each language. The findings are expected to be utilised for pedagogical purposes, particularly in improving EFL teaching of writing at the undergraduate level. The study is based on an empirical investigation of the phenomenon of connectivity and, for optimal efficiency, employs computer-aided procedures, particularly those adopted in corpus linguistics, for investigatory purposes. One important methodological requirement is the establishment of two comparable and statistically adequate corpora, also the design of software and the use of existing packages and to achieve the basic analysis. Each corpus comprises ca 250,000 words of newspaper material sampled in accordance to a specific set of criteria and assembled in machine readable form prior to the computer-assisted analysis. A suite of programmes have been written in SPITBOL to accomplish a variety of analytical tasks, and in particular to perform a battery of measurements intended to quantify the textual functioning of connectives in each corpus. Concordances and some word lists are produced by using OCP. Results of these researches confirm the existence of fundamental differences in text organisation in Arabic in comparison to English. This manifests itself in the way textual operations of grouping and sequencing are performed and in the intensity of the textual role of connectives in imposing linearity and continuity and in maintaining overall stability. Furthermore, computation of connective functionality and range of operationality has identified fundamental differences in the way favourable choices for text organisation are made and implemented.

Computer aided design and manufacture for three dimensional milling

Advances in both computer technology and the necessary mathematical models capable of capturing the geometry of arbitarily shaped objects has led to the development in this thesis of a surface generation package called 'IBSCURF' aimed at providing a more economically viable solution to free-form surface manufacture. A suit of computer programs written in FORTRAN 77 has been developed to provide computer aids for every aspect of work in designing and machining free-form surfaces. A vector-valued parametric method was used for shape description and a lofting technique employed for the construction of the surface. The development of the package 'IBSCURF' consists of two phases. The first deals with CAD. The design process commences in defining the cross-sections which are represented by uniform B-spline curves as approximations to give polygons. The order of the curve and the position and number of the polygon vertices can be used as parameters for the modification to achieve the required curves. When the definitions of the sectional curves is complete, the surface is interpolated over them by cubic cardinal splines. To use the CAD function of the package to design a mould for a plastic handle, a mathematical model was developed. To facilitate the integration of design and machining using the mathematical representation of the surface, the second phase of the package is concerned with CAM which enables the generation of tool offset positions for ball-nosed cutters and a general post-processor has been developed which automatically generates NC tape programs for any CNC milling machine. The two phases of these programs have been successfully implemented, as a CAD/CAM package for free-form surfaces on the VAX 11/750 super-minicomputer with graphics facilities for displaying drawings interactively on the terminal screen. The development of this package has been beneficial in all aspects of design and machining of free form surfaces.

Computer aided design and analysis of cold formed sections

The work reported in this thesis is concerned with the improvement and expansion of the assistance given to the designer by the computer in the design of cold formed sections. The main contributions have been in four areas, which have consequently led to the fifth, the development of a methodology to optimise designs. This methodology can be considered an `Expert Design System' for cold formed sections. A different method of determining section properties of profiles was introduced, using the properties of line and circular elements. Graphics were introduced to show the outline of the profile on screen. The analysis of beam loading has been expanded to beam loading conditions where the number of supports, point loads, and uniform distributive loads can be specified by the designer. The profile can then be checked for suitability for the specified type of loading. Artificial Intelligence concepts have been introduced to give the designer decision support from the computer, in combination with the computer aided design facilities. The more complex decision support was adopted through the use of production rules. All the support was based on the British standards. A method has been introduced, by which the appropriate use of stiffeners can be determined and consequently designed by the designer. Finally, the methodology by which the designer is given assistance from the computer, without constraining the designer, was developed. This methodology gives advice to the designer on possible methods of improving the design, but allows the designer to reject that option, and analyse the profile accordingly. The methodology enables optimisation to be achieved by the designer, designing variety of profiles for a particular loading, and determining which one is best suited.

Computer aided design and manufacture of form-rolls

Cold roll forming of thin-walled sections is a very useful process in the sheet metal industry. However, the conventional method for the design and manufacture of form-rolls, the special tooling used in the cold roll forming process, is a very time consuming and skill demanding exercise. This thesis describes the establishment of a stand-alone minicomputer based CAD/CAM system for assisting the design and manufacture of form-rolls. The work was undertaken in collaboration with a leading manufacturer of thin-walled sections. A package of computer programs have been developed to provide computer aids for every aspect of work in form-roll design and manufacture. The programs have been successfully implemented, as an integrated CAD/CAM software system, on the ICL PERQ minicomputer with graphics facilities. Thus, the developed CAD/CAM system is a single-user workstation, with software facilities to help the user to perform the conventional roll design activities including the design of the finished section, the flower pattern, and the form-rolls. A roll editor program can then be used to modify, if required, the computer generated roll profiles. As far as manufacturing is concerned, a special-purpose roll machining program and postprocessor can be used in conjunction to generate the NC control part-programs for the production of form-rolls by NC turning. Graphics facilities have been incorporated into the CAD/CAM software programs to display drawings interactively on the computer screen throughout all stages of execution of the CAD/CAM software. It has been found that computerisation can shorten the lead time in all activities dealing with the design and manufacture of form-rolls, and small or medium size manufacturing companies can gain benefits from the CAD/CM! technology by developing, according to its own specification, a tailor-made CAD/CAM software system on a low cost minicomputer.

Justice and morality:human suffering, natural law and international politics

Bridging the contending theories of natural law and international relations, this book proposes a 'relational ontology' as the basis for rethinking our approach to international politics. The book contains a number of challenging and controversial ideas on the study of international political thought which should provoke constructive debate within international relations theory, political theory, and philosophical ethics. © Amanda Russell Beattie 2010. All rights reserved.

'Only in the leap from the lion's head will he prove his worth':natural law and international relations

This article argues the benefits of including a theological interpretation of natural law morality within the normative discourses of international politics. It challenges the assumption of a Grotian secular natural law arguing that practical reason, in a Thomist interpretation, is better suited to the demands of international political theory. It engages with themes of agency, practical reason, and community in order to enhance the content of the post-territorial community evidenced in ethical cosmopolitan debates. Likewise, it envisions a simultaneously enhancing a rapprochement among cosmopolitan and communitarian discourses of international politics facilitated through an institutional design guided by the morality of natural law.

The law and finance of share repurchases in Europe

This article analyses the impact of the EU market abuse law on share repurchases. We find that the Member States' previous rules differed considerably, and therefore it can be said that the Regulation on share repurchases has provided uniformity as to the availability of a safe harbour for share repurchases. The picture, however, gets more difficult to assess if we consider our findings on the actual effect of the law. Our results do not confirm a “simple law and finance story“ according to which market participants would have just reacted as expected by the new legal rules. Rather, it seems to be the case that the value of legal certainty and the positive signal of common legal rules have also had an impact on the propensity to repurchase own stock.