Novel formulation strategies for the fabrication of lyophilised orally disintegrating tablets

Orally disintegrating Tablets (ODTs), also known as fast-disintegrating, fast-melt or fast-dissolving tablets, are a relatively novel dosage technology that involves the rapid disintegration or dissolution of the dosage form into a solution or suspension in the mouth without the need for water. The solution containing the active ingredients is swallowed, and the active ingredients are then absorbed through the gastrointestinal epithelium to reach the target and produce the desired effect. Formulation of ODTs was originally developed to address swallowing difficulties of conventional solid oral dosage forms (tablets and capsules) experienced by wide range of patient population, especially children and elderly. The current work investigates the formulation and development of ODTs prepared by freeze drying. Initial studies focused on formulation parameters that influence the manufacturing process and performance of lyophilised tablets based on excipients used in commercial products (gelatin and saccharides). The second phase of the work was followed up by comprehensive studies to address the essential need to create saccharide free ODTs using naturally accruing amino acids individually or in combinations. Furthermore, a factorial design study was carried out to investigate the feasibility of delivering multiparticulate systems of challenging drugs using a novel formulation that exploited the electrostatic associative interaction between gelatin and carrageenan. Finally, studies aimed to replace gelatin with ethically and morally accepted components to the end users were performed and the selected binder was used in factorial design studies to investigate and optimise ODT formulations that incorporated drugs with varies physicochemical properties. Our results show that formulation of elegant lyophilised ODTs with instant disintegration and adequate mechanical strength requires carful optimisation of gelatin concentration and bloom strength in addition to saccharide type and concentration. Successful formulation of saccharides free lyophilised ODTs requires amino acids that crystallise in the frozen state or display relatively high Tg', interact and integrate completely with the binder and, also, display short wetting time with the disintegrating medium. The use of an optimised mixture of gelatin, carrageenan and alanine was able to create viscous solutions to suspend multiparticulate systems and at the same time provide tablets with short disintegration times and adequate mechanical properties. On the other hand, gum arabic showed an outstanding potential for use as a binder in the formulation of lyophilised ODTs. Compared to gelatin formulations, the use of gum arabic simplified the formulation stages, shortened the freeze drying cycles and produced tablets with superior performance in terms of the disintegration time and mechanical strength. Furthermore, formulation of lyophilised ODTs based on gum arabic showed capability to deliver diverse range of drugs with advantages over commercial products.

Modelling foreign direct investment in China

This thesis consists of three empirical and one theoretical studies. While China has received an increasing amount of foreign direct investment (FDI) and become the second largest host country for FDI in recent years, the absence of comprehensive studies on FDI inflows into this country drives this research. In the first study, an econometric model is developed to analyse the economic, political, cultural and geographic determinants of both pledged and realised FDI in China. The results of this study suggest that China's relatively cheaper labour force, high degree of international integration with the outside world (represented by its exports and imports) and bilateral exchange rates are the important economic determinants of both pledged FDI and realised FDI in China. The second study analyses the regional distribution of both pledged and realised FDI within China. The econometric properties of the panel data set are examined using a standardised 't-bar' test. The empirical results indicate that provinces with higher level of international trade, lower wage rates, more R&D manpower, more preferential policies and closer ethnic links with overseas Chinese attract relatively more FDI. The third study constructs a dynamic equilibrium model to study the interactions among FDI, knowledge spillovers and long run economic growth in a developing country. The ideas of endogenous product cycles and trade-related international knowledge spillovers are modified and extended to FDI. The major conclusion is that, in the presence of FDI, economic growth is determined by the stock of human capital, the subjective discount rate and knowledge gap, while unskilled labour can not sustain growth. In the fourth study, the role of FDI in the growth process of the Chinese economy is investigated by using a panel of data for 27 provinces across China between 1986 and 1995. In addition to FDI, domestic R&D expenditure, international trade and human capital are added to the standard convergence regressions to control for different structural characteristics in each province. The empirical results support endogenous innovation growth theory in which regional per capita income can converge given technological diffusion, transfer and imitation.

Negative brand personality:the construct, its antecedents and outcome variables

By evolving brands and building on the importance of self-expression, Aaker (1997) developed the brand personality framework as a means to understand brand-consumer relationships. The brand personality framework captures the core values and characteristics described in human personality research in an attempt to humanize brands. Although influential across many streams of brand personality research, the current conceptualization of brand personality only offers a positively-framed approach. To date, no research, both conceptually and empirically, has thoroughly incorporated factors reflective of Negative Brand Personality, despite the fact that almost all researchers in personality are in agreement that factors akin to Extraversion (positive) and Neuroticism (negative) should be in a comprehensive personality scale to accommodate consumers’ expressions. As a result, the study of brand personality is only half complete since the current research trend is to position brand personality under brand image. However, with the brand personality concept being confused with brand identity at the empirical stage, factors reflective of Negative Brand Personality have been neglected. Accordingly, this thesis extends the current conceptualization of brand personality by demarcating the existing typologies of desirable brand personality and incorporating the characteristics reflective of consumers’ discrepant self-meaning to provide a more complete understanding of brand personality. However, it is not enough to interpret negative factors as the absence of positive factors. Negative factors reflect consumers’ anxious and frustrated feelings. Therefore, this thesis contributes to the current conceptualization of brand personality by, firstly, presenting a conceptual definition of Negative Brand Personality in order to provide a theoretical basis for the development of a Negative Brand Personality scale, then, secondly, identifying what constitutes Negative Brand Personality and to what extent consumers’ cognitive dissonance explains the nature of Negative Brand Personality, and, thirdly, ascertaining the impact Negative Brand Personality has on attitudinal constructs, namely: Negative Attitude, Detachment, Brand Loyalty and Satisfaction, which have proven to predict behaviors such as choice and (re-)purchasing. In order to deliver on the three main contributions, two comprehensive studies were conducted to a) develop a valid, parsimonious, yet relatively short measure of Negative Brand Personality, and b) ascertain how the Negative Brand Personality measure behaves within a network of related constructs. The mixed methods approach, grounded in theoretical and empirical development, provides evidence to suggest that there are four factors to Negative Brand Personality and, tested through use of a structural equation modeling technique, that these are influenced by Brand Confusion, Price Unfairness, Self- Incongruence and Corporate Hypocrisy. Negative Brand Personality factors mainly determined Consumers Negative Attitudes and Brand Detachment. The research contributes to the literature on brand personality by improving the consumer-brand relationship by means of engaging in a brandconsumer conversation in order to reduce consumers’ cognitive strain. The study concludes with a discussion on the theoretical and practical implications of the findings, its limitations, and potential directions for future research.

Determinants of human immunodeficiency virus type 1 escape from the primary CD8+ cytotoxic T lymphocyte response

CD8+ cytotoxic T lymphocytes (CTLs) play an important role in containment of virus replication in primary human immunodeficiency virus (HIV) infection. HIV's ability to mutate to escape from CTL pressure is increasingly recognized; but comprehensive studies of escape from the CD8 T cell response in primary HIV infection are currently lacking. Here, we have fully characterized the primary CTL response to autologous virus Env, Gag, and Tat proteins in three patients, and investigated the extent, kinetics, and mechanisms of viral escape from epitope-specific components of the response. In all three individuals, we observed variation beginning within weeks of infection at epitope-containing sites in the viral quasispecies, which conferred escape by mechanisms including altered peptide presentation/recognition and altered antigen processing. The number of epitope-containing regions exhibiting evidence of early CTL escape ranged from 1 out of 21 in a subject who controlled viral replication effectively to 5 out of 7 in a subject who did not. Evaluation of the extent and kinetics of HIV-1 escape from >40 different epitope-specific CD8 T cell responses enabled analysis of factors determining escape and suggested that escape is restricted by costs to intrinsic viral fitness and by broad, codominant distribution of CTL-mediated pressure on viral replication.

Synthesis and characterisation of interfacial layers in organic solar cells

The quest for renewable energy sources has led to growing attention in the research of organic photovoltaics (OPVs), as a promising alternative to fossil fuels, since these devices have low manufacturing costs and attractive end-user qualities, such as ease of installation and maintenance. Wide application of OPVs is majorly limited by the devices lifetime. With the development of new encapsulation materials, some degradation factors, such as water and oxygen ingress, can almost be excluded, whereas the thermal degradation of the devices remains a major issue. Two aspects have to be addressed to solve the problem of thermal instability: bulk effects in the photoactive layer and interfacial effects at the photoactive layer/charge-transporting layers. In this work, the interface between photoactive layer and electron-transporting zinc oxide (ZnO) in devices with inverted architecture was engineered by introducing polymeric interlayers, based on zinc-binding ligands, such as 3,4-dihydroxybenzene and 8-hydroxyquinoline. Also, a cross-linkable layer of poly(3,4-dimethoxystyrene) and its fullerene derivative were studied. At first, controlled reversible addition-fragmentation chain transfer (RAFT) polymerisation was employed to achieve well-defined polymers in a range of molar masses, all bearing a chain-end functionality for further modifications. Resulting polymers have been fully characterised, including their thermal and optical properties, and introduced as interlayers to study their effect on the initial device performance and thermal stability. Poly(3,4-dihydroxystyrene) and its fullerene derivative were found unsuitable for application in devices as they increased the work function of ZnO and created a barrier for electron extraction. On the other hand, their parental polymer, poly(3,4-dimethoxystyrene), and its fullerene derivative, upon cross-linking, resulted in enhanced efficiency and stability of devices, if compared to control. Polymers based on 8-hydroxyquinoline ligand had a negative effect on the initial stability of the devices, but increased the lifetime of the cells under accelerated thermal stress. Comprehensive studies of the key mechanisms, determining efficiency, such as charge generation and extraction, were performed by using time-resolved electrical and spectroscopic techniques, in order to understand in detail the effect of the interlayers on the device performance. Obtained results allow deeper insight into mechanisms of degradation that limit the lifetime of devices and prompt the design of better materials for the interface stabilisation.

Spectroscopic studies of field-induced electron emission from isolated microstructures

A detailed investigation has been undertaken into the field induced electron emission (FIEE) mechanism that occurs at microscopically localised `sites' on uncoated and dielectric coated metallic electrodes. These processes have been investigated using two dedicated experimental systems that were developed for this study. The first is a novel combined photo/field emission microscope, which employs a UV source to stimulate photo-electrons from the sample surface in order to generate a topographical image. This system utilises an electrostatic lens column to provide identical optical properties under the different operating conditions required for purely topographical and combined photo/field imaging. The system has been demonstrated to have a resolution approaching 1m. Emission images have been obtained from carbon emission sites using this system to reveal that emission may occur from the edge triple junction or from the bulk of the carbon particle. An existing UHV electron spectrometer has been extensively rebuilt to incorporate a computer control and data acquisition system, improved sample handling and manipulation and a specimen heating stage. Details are given of a comprehensive study into the effects of sample heating on the emission process under conditions of both bulk and transient heating. Similar studies were also performed under conditions of both zero and high applied field. These show that the properties of emission sites are strongly temperature and field dependent thus indicating that the emission process is `non-metallic' in nature. The results have been shown to be consistent with an existing hot electron emission model.

Comprehensive human urine standards for comparability and standardization in clinical proteome analysis

Urine proteomics is emerging as a powerful tool for biomarker discovery. The purpose of this study is the development of a well-characterized "real life" sample that can be used as reference standard in urine clinical proteomics studies.

A comparison of five lipid extraction solvent systems for lipidomic studies of human LDL

Lipidome profile of fluids and tissues is a growing field as the role of lipids as signaling molecules is increasingly understood, relying on an effective and representative extraction of the lipids present. A number of solvent systems suitable for lipid extraction are commonly in use, though no comprehensive investigation of their effectiveness across multiple lipid classes has been carried out. To address this, human LDL from normolipidemic volunteers was used to evaluate five different solvent extraction protocols [Folch, Bligh and Dyer, acidified Bligh and Dyer, methanol (MeOH)-tert-butyl methyl ether (TBME), and hexane-isopropanol] and the extracted lipids were analyzed by LC-MS in a high-resolution instrument equipped with polarity switching. Overall, more than 350 different lipid species from 19 lipid subclasses were identified. Solvent composition had a small effect on the extraction of predominant lipid classes (triacylglycerides, cholesterol esters, and phosphatidylcholines). In contrast, extraction of less abundant lipids (phosphatidylinositols, lyso-lipids, ceramides, and cholesterol sulfates) was greatly influenced by the solvent system used. Overall, the Folch method was most effective for the extraction of a broad range of lipid classes in LDL, although the hexane-isopropanol method was best for apolar lipids and the MeOH-TBME method was suitable for lactosyl ceramides. Copyright © 2013 by the American Society for Biochemistry and Molecular Biology, Inc.

Empirical studies of corporate governance in China

The thesis aims to provide empirical studies towards Chinese corporate governance. Since China initially established its stock exchange system in the 1990s, it has gone through different stages of changes to become a more market-oriented system. Extensive studies have been conducted in Chinese corporate governance, however, many were theoretical discussion focusing on the early stages and there‘s a general lack of empirical analysis. This paper provides three empirical analysis of the Chinese corporate governance: the overall market discipline efficiency, the impact of capital structure on agency costs, the status of 2005- 2006 reform that substantially modified ownership structure of Chinese listed firms and separated ownership and control of listed firms. The three empirical studies were selected to reflect four key issues that need answering: the first empirical study, using event study to detect market discipline on a collective level. This study filled a gap in the Chinese stock market literature for being the first one ever using cross-market data to test market discipline. The second empirical study endeavoured to contribute to the existing corporate governance literature regarding capital structure and agency costs. Two conclusions can be made through this study: 1) for Chinese listed firms, higher gearing means higher asset turnover ratios and ROE, i.e. more debts seem to reduce agency costs; 2) concentration level of shares appears to be irrelevant with company performance, controlling shareholders didn‘t seem to commit to the improvement of corporate assets utilization or contribute to reducing agency costs. This study addressed a key issue in Chinese corporate governance since the state has significant shareholding in most big listed companies. The discussion of corporate governance in the Chinese context would be completely meaningless without discussing the state‘s role in corporate governance, given that about 2/3 of the almost all shares were non-circulating shares controlled by the state before the 2005-2006 overhaul ownership reform. The third study focused on the 2005-2006 reform of ownership of Chinese listed firms. By collecting large-scale data covering all 64 groups of Chinese listed companies went through the reform by the end of 2006 (accounting for about 97.86% and 96.76% of the total market value of Shanghai (SSE) and Shenzhen Stock Exchange (SZSE) respectively), a comprehensive study about the ownership reform was conducted. This would be first and most comprehensive empirical study in this area. The study of separated ownership and control of listed firm is the first study conducted using the ultimate ownership concept in Chinese context.