Analysis of the degree of compliance with the EU Machinery Directive.

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Health beliefs affect the correct replacement of daily disposable contact lenses:predicting compliance with the Health Belief Model and the Theory of Planned Behaviour

Purpose: To assess the compliance of Daily Disposable Contact Lenses (DDCLs) wearers with replacing lenses at a manufacturer-recommended replacement frequency. To evaluate the ability of two different Health Behavioural Theories (HBT), The Health Belief Model (HBM) and The Theory of Planned Behaviour (TPB), in predicting compliance. Method: A multi-centre survey was conducted using a questionnaire completed anonymously by contact lens wearers during the purchase of DDCLs. Results: Three hundred and fifty-four questionnaires were returned. The survey comprised 58.5% females and 41.5% males (mean age 34. ±. 12. years). Twenty-three percent of respondents were non-compliant with manufacturer-recommended replacement frequency (re-using DDCLs at least once). The main reason for re-using DDCLs was "to save money" (35%). Predictions of compliance behaviour (past behaviour or future intentions) on the basis of the two HBT was investigated through logistic regression analysis: both TPB factors (subjective norms and perceived behavioural control) were significant (p. <. 0.01); HBM was less predictive with only the severity (past behaviour and future intentions) and perceived benefit (only for past behaviour) as significant factors (p. <. 0.05). Conclusions: Non-compliance with DDCLs replacement is widespread, affecting 1 out of 4 Italian wearers. Results from the TPB model show that the involvement of persons socially close to the wearers (subjective norms) and the improvement of the procedure of behavioural control of daily replacement (behavioural control) are of paramount importance in improving compliance. With reference to the HBM, it is important to warn DDCLs wearers of the severity of a contact-lens-related eye infection, and to underline the possibility of its prevention.

Measuring the assessment and counselling provided with the supply of non-prescription asthma reliever medication: a simulated patient study

BACKGROUND: Over one quarter of asthma reliever medications are provided without prescription by community pharmacies in Australia. Evidence that community pharmacies provide these medications with sufficient patient assessment and medication counseling to ensure compliance with the government's Quality Use of Medicines principles is currently lacking. OBJECTIVE: To assess current practice when asthma reliever medication is provided in the community pharmacy setting and to identify factors that correlate with assessment of asthma control. METHODS: Researchers posing as patients visited a sample of Perth metropolitan community pharmacies in May 2007. During the visit, the simulated patient enacted a standardized scenario of someone with moderately controlled asthma who wished to purchase a salbutamol (albuterol) inhaler without prescription. Results of the encounter were recorded immediately after the visit. Regression analysis was performed, with medication use frequency (a marker of asthma control) as the dependent variable. RESULTS: One hundred sixty community pharmacies in the Perth metropolitan area were visited in May 2007. Pharmacists and/or pharmacy assistants provided some form of assessment in 84% of the visits. Counseling was provided to the simulated patients in 24% of the visits. Only 4 pharmacy staff members asked whether the simulated patient knew how to use the inhaler. Significant correlation was found between assessment and/or counseling of reliever use frequency and 3 independent variables: visit length (p < 0.001), number of assessment questions asked (p < 0.001), and the simulated patient who conducted the visit (p < 0.02). CONCLUSIONS: Both patient assessment and medication counseling were suboptimal compared with recommended practice when nonprescription asthma reliever medication was supplied in the community pharmacy setting. Pharmacy and pharmacist demographic variables do not appear to affect assessment of asthma control. This research indicates the need for substantial improvements in practice in order to provide reliever medication in line with Quality Use of Medication principles of ensuring safe and effective use of medication.

The effect of innate compliance on the performance of a counterpulsation device

Cardiovascular disease (CVD) continues to be one of the top causes of mortality in the world. World Heart Organization (WHO) reported that in 2004, CVD contributed to almost 30% of death from estimated worldwide death figures of 58 million[1]. Heart failure treatment varies from lifestyle adjustment to heart transplantation; its aims are to reduce HF symptoms, prolong patient survival and minimize risk [2]. One alternative available in the market for HF treatment is Left Ventricular Assist Device (LVAD). Chronic Intermittent Mechanical Support (CIMS) device is a novel (LVAD) heart failure treatment using counterpulsation similar to Intra Aortic Balloon Pumps (IABP). However, the implantation site of the CIMS balloon is in the ascending aorta just distal to aortic valve contrasted with IABP in the descending aorta. Counterpulsation coupled with implantation close to the aortic valve enables comparable flow augmentation with reduced balloon volume. Two prototypes of the CIMS balloon were constructed using rapid prototyping: the straight-body model is a cylindrical tube with a silicone membrane lining with zero expansive compliance. The compliant-body model had a bulging structure that allowed the membrane to expand under native systolic pressure increasing the device’s static compliance to 1.5 mL/mmHg. This study examined the effect of device compliance and vascular compliance on counterpulsating flow augmentation. Both prototypes were tested on a two-element Windkessel model human mock circulatory loop (MCL). The devices were placed just distal to aortic valve and left coronary artery. The MCL mimicked HF with cardiac output of 3 L/min, left ventricular pressure of 85/15 mmHg, aortic pressure of 70/50 mmHg and left coronary artery flow rate of 66 mL/min. The mean arterial pressure (MAP) was calculated to be 57 mmHg. Arterial compliance was set to be1.25 mL/mmHg and 2.5 mL/mmHg. Inflation of the balloon was triggered at the dicrotic notch while deflation was at minimum aortic pressure prior to systole. Important haemodynamics parameters such as left ventricular pressure (LVP), aortic pressure (AoP), cardiac output (CO), left coronary artery flowrate (QcorMean), and dP (Peak aortic diastolic augmentation pressure – AoPmax ) were simultaneously recorded for both non-assisted mode and assisted mode. ANOVA was used to analyse the effect of both factors (balloon and arterial compliance) to flow augmentation. The results showed that for cardiac output and left coronary artery flowrate, there were significant difference between balloon and arterial compliance at p < 0.001. Cardiac output recorded maximum output at 18% for compliant body and stiff arterial compliance. Left coronary artery flowrate also recorded around 20% increase due to compliant body and stiffer arterial compliance. Resistance to blood ejection recorded highest difference for combination of straight body and stiffer arterial compliance. From these results it is clear that both balloon and arterial compliance are statistically significant factors for flow augmentation on peripheral artery and reduction of resistance. Although the result for resistance reduction was different from flow augmentation, these results serves as an important aspect which will influence the future design of the CIMS balloon and its control strategy. References: 1. Mathers C, Boerma T, Fat DM. The Global Burden of disease:2004 update. Geneva: World Heatlh Organization; 2008. 2. Jessup M, Brozena S. Heart Failure. N Engl J Med 2003;348:2007-18.

Certainty of subject matter in the law of trusts

This piece argued that the accepted orthodoxy concerning the requirement that each individual piece of property is individually segregated for a valid trust to exist is unsupported by the case law, and that there is nothing wrong in principle or theory with a trust that exists for unsegregated property.

The 'law of requisite variety' may assist climate change negotiations:a review of the Kyoto and Durban meetings

Ashby wrote about cybernetics, during which discourse he described a Law that attempts to resolve difficulties arising in complex situations – he suggested using variety to combat complexity. In this paper, we note that the delegates to the UN Framework Convention on Climate Change (UNFCCC) meeting in Kyoto, 1997, were offered a ‘simplifying solution’ to cope with the complexity of discussing multiple pollutants allegedly contributing to ‘climate change’. We assert that the adoption of CO2eq has resulted in imprecise thinking regarding the ‘carbon footprint’ – that is, ‘CO2’ – to the exclusion of other pollutants. We propose, as Ashby might have done, that the CO2eq and other factors within the ‘climate change’ negotiations be disaggregated to allow careful and specific individual solutions to be agreed on each factor. We propose a new permanent and transparent ‘action group’ be in charge of agenda setting and to manage the messy annual meetings. This body would be responsible for achieving accords at these annual meetings, rather than forcing this task on national hosts. We acknowledge the task is daunting and we recommend moving on from Ashby's Law to Beer's Viable Systems approach.

Corporate governance and compliance with International Financial Reporting Standards (IFRSs):evidence from two MENA stock exchanges

This study examines the influence of corporate governance structures on the levels of compliance with IFRSs disclosure requirements by companies listed on the stock exchanges of two leading MENA (Middle East and North Africa) countries, Egypt and Jordan. This study employs a cross-sectional analysis of a sample of non-financial companies listed on the two stock exchanges for the fiscal year 2007. Using an unweighted disclosure index, the study measures the levels of compliance by companies listed on the two stock exchanges investigated.Univariate and multivariate regression analyses are used to estimate the relationships proposed in the hypotheses. In addition, the study uses semi-structured interviews in order to supplement the interpretation of the findings of the quantitative analyses. An innovative theoretical foundation is deployed, in which compliance is interpretable through three lenses - institutional isomorphism theory, secrecy versus transparency (one of Gray’s accounting sub-cultural values), and financial economics theories. The study extends the financial reporting literature, cross-national comparative financial disclosure literature, and the emerging markets disclosure literature by carrying out one of the first comparative studies of the above mentioned stock exchanges. Results provide evidence of a lack of de facto compliance (i.e., actual compliance) with IFRSs disclosure requirements in the scrutinised MENA countries. The impact of corporate governance mechanisms for best practice on enhancing the extent of compliance with mandatory IFRSs is absent in the stock exchanges in question. The limited impact of corporate governance best practice is mainly attributed to the novelty of corporate governance in the region, a finding which lends support to the applicability of the proposed theoretical foundation to the MENA context. Finally, the study provides recommendations for improving de facto compliance with IFRSs disclosure requirements and corporate governance best practice in the MENA region and suggests areas for future research.

Visualisation of quality information for geospatial and remote sensing data:providing the GIS community with the decision support tools for geospatial dataset quality evaluation

The evaluation of geospatial data quality and trustworthiness presents a major challenge to geospatial data users when making a dataset selection decision. The research presented here therefore focused on defining and developing a GEO label – a decision support mechanism to assist data users in efficient and effective geospatial dataset selection on the basis of quality, trustworthiness and fitness for use. This thesis thus presents six phases of research and development conducted to: (a) identify the informational aspects upon which users rely when assessing geospatial dataset quality and trustworthiness; (2) elicit initial user views on the GEO label role in supporting dataset comparison and selection; (3) evaluate prototype label visualisations; (4) develop a Web service to support GEO label generation; (5) develop a prototype GEO label-based dataset discovery and intercomparison decision support tool; and (6) evaluate the prototype tool in a controlled human-subject study. The results of the studies revealed, and subsequently confirmed, eight geospatial data informational aspects that were considered important by users when evaluating geospatial dataset quality and trustworthiness, namely: producer information, producer comments, lineage information, compliance with standards, quantitative quality information, user feedback, expert reviews, and citations information. Following an iterative user-centred design (UCD) approach, it was established that the GEO label should visually summarise availability and allow interrogation of these key informational aspects. A Web service was developed to support generation of dynamic GEO label representations and integrated into a number of real-world GIS applications. The service was also utilised in the development of the GEO LINC tool – a GEO label-based dataset discovery and intercomparison decision support tool. The results of the final evaluation study indicated that (a) the GEO label effectively communicates the availability of dataset quality and trustworthiness information and (b) GEO LINC successfully facilitates ‘at a glance’ dataset intercomparison and fitness for purpose-based dataset selection.