Use of complementary and alternative medicine and self-tests by coronary heart disease patients

Background: Coronary heart disease patients have to learn to manage their condition to maximise quality of life and prevent recurrence or deterioration. They may develop their own informal methods of self-management in addition to the advice they receive as part of formal cardiac rehabilitation programmes. This study aimed to explore the use of complementary and alternative medicines and therapies (CAM), self-test kits and attitudes towards health of UK patients one year after referral to cardiac rehabilitation. Method: Questionnaire given to 463 patients attending an assessment clinic for 12 month follow up in four West Midlands hospitals. Results: 91.1% completed a questionnaire. 29.1% of patients used CAM and/or self-test kits for self-management but few (8.9%) used both methods. CAM was more often used for treating other illnesses than for CHD management. Self-test kit use (77.2%,) was more common than CAM (31.7%,) with BP monitors being the most prevalent (80.0%). Patients obtained self-test kits from a wide range of sources, for the most part (89.5%) purchased entirely on their own initiative. Predictors of self-management were post revascularisation status and higher scores on 'holism', 'rejection of authority' and 'individual responsibility'. Predictors of self-test kit use were higher `holism' and 'individual responsibility' scores. Conclusion: Patients are independently using new technologies to monitor their cardiovascular health, a role formerly carried out only by healthcare practitioners. Post-rehabilitation patients reported using CAM for self-management less frequently than they reported using self-test kits. Reports of CAM use were less frequent than in previous surveys of similar patient groups. Automatic assumptions cannot be made by clinicians about which CHD patients are most likely to self-manage. In order to increase trust and compliance it is important for doctors to encourage all CHD patients to disclose their self-management practices and to continue to address this in follow up consultations.

Type 2 diabetes:assessing the relative risks and benefits of glucose-lowering medications

The selection of appropriate pharmacologic therapy for any disease requires a careful assessment of benefit and risk. In the case of type 2 diabetes, this decision typically balances the benefits accrued from improved glycemic control with the risks inherent in glucose-lowering medications. This review is intended to assist therapeutic decision-making by carefully assessing the potential benefit from improved metabolic control relative to the potential risks of a wide array of currently prescribed glucose-lowering agents. Wherever possible, risks and benefits have been expressed in terms of absolute rates (events per 1000 patient-years) to facilitate cross-study comparisons. The review incorporates data from new studies (Action in Diabetes and Vascular Disease: Preterax and Diamicron Modified Release Controlled Evaluation, Action to Control Cardiovascular Risk in Diabetes, and the Veterans Affairs Diabetes Trial), as well as safety issues associated with newer glucose-lowering medications. © 2010 Elsevier Inc. All rights reserved.

Apodisation of photo-induced waveguide gratings using double-exposure with complementary duty cycles

We present a novel apodisation scheme for photo-induced waveguide gratings. The apodisation is implemented with double exposures that have reversely varying duty cycles. We have successfully applied the proposed scheme to remove the sidelobes of long period gratings (LPGs). We also observed for the first time super strong sidelobes in LPGs when creating them with only a single varying-duty-cycle exposure. The strong sidelobes can be well explained with a Mach-Zehnder interference model.

On the adoption decision and the intensity of use of complementary innovations: The intra firm diffusion of management practices across UK establishments

This paper contributes to the literature on the intra-firm diffusion of innovations by investigating the factors that affect the firm’s decision to adopt and use sets of complementary innovations. We define complementary innovations those innovations whose joint use generates super additive gains, i.e. the gain from the joint adoption is higher than the sum of the gains derived from the adoption of each innovation in isolation. From a theoretical perspective, we present a simple decision model, whereby the firm decides ‘whether’ and ‘how much’ to invest in each of the innovations under investigation based upon the expected profit gain from each possible combination of adoption and use. The model shows how the extent of complementarity among the innovations can affect the firm’s profit gains and therefore the likelihood that the firm will adopt these innovations jointly, rather than individually. From an empirical perspective, we focus on four sets of management practices, namely operating (OMP), monitoring (MMP), targets (TMP) and incentives (IMP) management practices. We show that these sets of practices, although to a different extent, are complementary to each other. Then, we construct a synthetic indicator of the depth of their use. The resulting intra-firm index is built to reflect not only the number of practices adopted but also the depth of their individual use and the extent of their complementarity. The empirical testing of the decision model is carried out using the evidence from the adoption behaviour of a sample of 1,238 UK establishments present in the 2004 Workplace Employment Relations Survey (WERS). Our empirical results show that the intra-firm profitability based model is a good model in that it can explain more of the variability of joint adoption than models based upon the variability of adoption and use of individual practices. We also investigate whether a number of firm specific and market characteristics by affecting the size of the gains (which the joint adoption of innovations can generate) may drive the intensity of use of the four innovations. We find that establishment size, whether foreign owned, whether exposed to an international market and the degree of homogeneity of the final product are important determinants of the intensity of the joint adoption of the four innovations. Most importantly, our results point out that the factors that the economics of innovation literature has been showing to affect the intensity of use of a technological innovation do also affect the intensity of use of sets of innovative management practices. However, they can explain only a small part of the diversity of their joint adoption use by the firms in the sample.

The intra-firm diffusion of complementary innovations: Evidence from the adoption of management practices by British establishments

This paper presents a simple profitability-based decision model to show how synergistic gains generated by the joint adoption of complementary innovations may influence the firm's adoption decision. For this purpose a weighted index of intra-firm diffusion is built to investigate empirically the drivers of the intensity of joint use of a set of complementary innovations. The findings indicate that establishment size, ownership structure and product market concentration are important determinants of the intensity of use. Interestingly, the factors that affect the extent of use of technological innovations do also affect that of clusters of management practices. However, they can explain only part of the heterogeneity of the benefits from joint use.

Workers' understanding of chemical risks: electroplating case study

BACKGROUND: There is limited research concerning how small companies in particular, respond to health and safety messages. AIMS: To understand individuals' knowledge and beliefs about chemical risks and to compare these with those of experts. METHODS: The use of chromic acid in particular, and also other chemicals associated with chrome plating were studied. All chromium plating firms were based in the West Midlands. The methodology involved initial face to face interviews (n = 21) with chromium platers, structured questionnaires (n = 84) to test the prevalence of beliefs identified in the interviews, an expert questionnaire, and a workshop to discuss findings. The responses of platers were compared with those of occupational health and safety experts. RESULTS: Although chromium platers appeared to understand the short term adverse effects of the chemicals to which they are exposed, their understanding of long term, or chronic effects appeared to be incomplete. They had good knowledge of acute effects based primarily on experience. Platers were aware of the hazardous nature of the chemicals with which they work, but did not draw distinction between the terms "hazards" and "risks". They had difficulties articulating the effects of the chemicals and how exposure might occur; although it is inappropriate to equate this with lack of knowledge. A significant minority of platers displayed deficiencies in understanding key technical terms used in Safety Data Sheets. CONCLUSIONS: This study provides a method which can be used to gain some understanding of workers' knowledge and beliefs about risks that they are exposed to in the workplace. The study also identifies gaps between the platers' knowledge and beliefs and those of experts. New risk information needs to be designed which addresses the information needs of platers using language that they understand.

Apodisation of photo-induced waveguide gratings using double-exposure with complementary duty cycles

We present a novel apodisation scheme for photo-induced waveguide gratings. The apodisation is implemented with double exposures that have reversely varying duty cycles. We have successfully applied the proposed scheme to remove the sidelobes of long period gratings (LPGs). We also observed for the first time super strong sidelobes in LPGs when creating them with only a single varying-duty-cycle exposure. The strong sidelobes can be well explained with a Mach-Zehnder interference model.

Social and scientific issues in the acceptibility of radiation risks

Ionising radiation hazards are perhaps the most documented and regulated occupational and environmental hazard. In the radiological protection field a single expert advisory organisation has had an unusually large influence on the international standard setting process. This is the International Commission on Radiological Protection (ICRP). Two common, and opposing views, exist over the formulation of protection recommendations by the ICRP. The first, and most widely accepted, is that its recommendations are scientifically determined. The second view, is that its recommendations are politically or socially determined. Neither of these analyses adequately accounts for the complex process in which protection recommendations are formulated. A third view, provided by studies of the origins of scientific controversy, suggests that both science and social factors are important in the assessment and limitation of risk. The aim of this thesis is not simply to examine the origin of controversy. Issues of equal, if not more, importance are the resolution of controversy, the formation of consensus and the maintenance of expert authority and influence. These issues form the central focus of this thesis. The aim is to assess the process through which the ICRP formulates its radiological protection recommendations and comment on the extent that these are influenced by the affiliations of its members. This thesis concludes that the ICRP's recommendations have been shaped by a complex relationship of scientific and social considerations, in which a socio-technical commitment to nuclear energy has played a key role. The Commission has responded to new scientific data by making complex changes to its philosophy and methods of describing risk. Where reductions in numerical limits have been applied they have been accompanied by practical measures designed to limit the impact of the change and provide continuity with the old limits and flexibility in the application of the new recommendations.

Mathematical modelling of patient risks in a hospital environment, using multiple regression analysis

The aim of this research work was primarily to examine the relevance of patient parameters, ward structures, procedures and practices, in respect of the potential hazards of wound cross-infection and nasal colonisation with multiple resistant strains of Staphylococcus aureus, which it is thought might provide a useful indication of a patient's general susceptibility to wound infection. Information from a large cross-sectional survey involving 12,000 patients from some 41 hospitals and 375 wards was collected over a five-year period from 1967-72, and its validity checked before any subsequent analysis was carried out. Many environmental factors and procedures which had previously been thought (but never conclusively proved) to have an influence on wound infection or nasal colonisation rates, were assessed, and subsequently dismissed as not being significant, provided that the standard of the current range of practices and procedures is maintained and not allowed to deteriorate. Retrospective analysis revealed that the probability of wound infection was influenced by the patient's age, duration of pre-operative hospitalisation, sex, type of wound, presence and type of drain, number of patients in ward, and other special risk factors, whilst nasal colonisation was found to be influenced by the patient's age, total duration of hospitalisation, sex, antibiotics, proportion of occupied beds in the ward, average distance between bed centres and special risk factors. A multi-variate regression analysis technique was used to develop statistical models, consisting of variable patient and environmental factors which were found to have a significant influence on the risks pertaining to wound infection and nasal colonisation. A relationship between wound infection and nasal colonisation was then established and this led to the development of a more advanced model for predicting wound infections, taking advantage of the additional knowledge of the patient's state of nasal colonisation prior to operation.

Complementary methods to investigate the development of clogging within a horizontal sub-surface flow tertiary treatment wetland

A combination of experimental methods was applied at a clogged, horizontal subsurface flow (HSSF) municipal wastewater tertiary treatment wetland (TW) in the UK, to quantify the extent of surface and subsurface clogging which had resulted in undesirable surface flow. The three dimensional hydraulic conductivity profile was determined, using a purpose made device which recreates the constant head permeameter test in-situ. The hydrodynamic pathways were investigated by performing dye tracing tests with Rhodamine WT and a novel multi-channel, data-logging, flow through Fluorimeter which allows synchronous measurements to be taken from a matrix of sampling points. Hydraulic conductivity varied in all planes, with the lowest measurement of 0.1 md1 corresponding to the surface layer at the inlet, and the maximum measurement of 1550 md1 located at a 0.4m depth at the outlet. According to dye tracing results, the region where the overland flow ceased received five times the average flow, which then vertically short-circuited below the rhizosphere. The tracer break-through curve obtained from the outlet showed that this preferential flow-path accounted for approximately 80% of the flow overall and arrived 8 h before a distinctly separate secondary flow-path. The overall volumetric efficiencyof the clogged system was 71% and the hydrology was simulated using a dual-path, dead-zone storage model. It is concluded that uneven inlet distribution, continuous surface loading and high rhizosphere resistance is responsible for the clog formation observed in this system. The average inlet hydraulic conductivity was 2 md1, suggesting that current European design guidelines, which predict that the system will reach an equilibrium hydraulic conductivity of 86 md1, do not adequately describe the hydrology of mature systems.

Accountability, organisational learning and risks to patient safety in England: conflict or compromise?

This article examines the current risk regulation regime, within the English National Health Service (NHS), by investigating the two, sometimes conflicting, approaches to risk embodied within the field of policies towards patient safety. The first approach focuses on promoting accountability and is built on legal principles surrounding negligence and competence. The second approach focuses on promoting learning from previous mistakes and near-misses, and is built on the development of a ‘safety culture’. Previous work has drawn attention to problems associated with risk-based regulation when faced with the dual imperatives of accountability and organisational learning. The article develops this by considering whether the NHS patient safety regime demonstrates the coexistence of two different risk regulation regimes, or merely one regime with contradictory elements. It uses the heuristic device of ‘institutional logics’ to examine the coexistence of and interrelationship between ‘organisational learning’ and ‘accountability’ logics driving risk regulation in health care.

A novel all-fiber bipolar transversal filter with complementary outputs

A novel all-fiber bipolar delay line filter is realized in a single-line cascaded high birefringence fiber structure. Optically coherent operation is achieved with suppression of interference noise. Complementary filter outputs give simultaneous lowpass and highpass responses.