The development of collaborative skills in young children

This thesis examines young children's early collaborative development when engaged in joint tasks with both a peer and a parent. It begins by examining how the term "collaborative" has been applied and researched in previous literature. As collaboration is found to usually require dialogue, and intersubjectivity is seen as an important component in the construction of both collaboration and dialogue, the ability to construct intersubjectivity is the subject of the rest of the chapter. The chapter concludes by introducing the research questions that underpin the experiments that follow. A number of experiments are then described. Experiments 1 and 2 investigate age differences in interaction styles and the communication strategies used by similar aged dyads. Experiments 3 and 4 investigate differences due to the age of the child and/or the status of the information giver (either parent or child) in the styles of interaction and the communication strategies used by parent and child dyads. Experiment 5 investigates the benefits of collaborating with a parent, and finally, Experiment 6 examines the collaborative ability of pre-schools. The thesis identifies a series of skills required for successful collaboration. These include recognition of a joint goal and the need to suppress individual desires, the ability to structure joint interaction, moving from role-based to a negotiating style, and communicative skills, for example, asking for clarification. Other reasons for children's failure in collaborative tasks involve task-related skills, such as the development of spatial terms, and failure to recognise the need for accuracy. The findings support Vygotsky's theory that when working with an adult, children perform at a higher level than when working with a peer. Evidence was also found of parents scaffolding the interaction for their children. However, further research is necessary to establish that such scaffolding skills affect the child's development of collaborative interactive skills.

Cross-institutional development of an online open course for educators:confronting current challenges and imagining future possibilities

The Global Dimensions in Higher Education module is a fully online open course for educators, jointly developed by three UK universities through a process of consultation and inquiry involving colleagues within the global education sector. The purpose of the module is two-fold. Firstly, to engage academics within and beyond the partner institutions in a critical exploration of transnational and global issues within higher education. Secondly, to provide the project partners with an opportunity to understand and address the challenges of jointly developing and delivering an online course that is to be offered both openly as well as integrated within credit-bearing and continued professional development provision for academics in the partner institutions. This short paper describes progress to date in developing the Global Dimensions in Higher Education module, our current activity focused on validating and implementing the module, and lessons learned to be considered for the collaborative development of open online courses.

International technology transfer and collaborative new product development:evidence and a case from the machine tool industry

In recent years, it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper, the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The paper outlines the links between the operational aspects of collaborations and their strategic objectives. It is based on empirical data collected from the machine tool industries in the UK and China. The evidence includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of BSA Tools Ltd and its Chinese partner the Changcheng Machine Tool Works is used to provide an in-depth example of the operational development of a successful collaboration. The paper concludes that a phased coordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work.

The importance of collaborative frontloading in automotive supply networks

Purpose – The purpose of this paper is to investigate how research and development (R&D) collaboration takes place for complex new products in the automotive sector. The research aims to give guidelines to increase the effectiveness of such collaborations. Design/methodology/approach – The methodology used to investigate this issue was grounded theory. The empirical data were collected through a mixture of interviews and questionnaires. The resulting inducted conceptual models were subsequently validated in industrial workshops. Findings – The findings show that frontloading of the collaborative members was a major issue in managing successful R&D collaborations. Research limitations/implications – The limitation of this research is that it is only based in the German automotive industry. Practical implications – Practical implications have come out of this research. Models and guidelines are given to help make a success of collaborative projects and their potential impacts on time, cost and quality metrics. Originality/value – Frontloading is not often studied in a collaborative manner; it is normally studied within just one organisation. This study has novel value because it has involved a number of different members throughout the supplier network.

International technology collaboration for new product development

In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.

Collaborative alliances and organisational innovation : a study of the innovation process

Despite the voluminous studies written about organisational innovation over the last 30-40 years our understanding of this phenomenon continues to be inconsistent and inconclusive (Wolfe, 1994). An assessment of the theoretical and methodological issues influencing the explanatory utility of many studies has led scholars (e.g. Slappendel, 1996) to re-evaluate the assumptions used to ground studies. Building on these criticisms the current study contributes to the development of an interactive perspective of organisational innovation. This work contributes empirically and theoretically to an improved understanding of the innovation process and the interaction between the realm of action and the mediating effects of pre-existing contingencies i.e. social control, economic exchange and the communicability of knowledge (Scarbrough, 1996). Building on recent advances in institutional theory (see Barley, 1986; 1990; Barley and Tolbert, 1997) and critical theory (Morrow, 1994, Sayer, 1992) the study aims to demonstrate, via longitudinal intensive research, the process through which ideas are translated into reality. This is significant because, despite a growing recognition of the implicit link between the strategic conduct of actors and the institutional realm in organisational analysis, there are few examples that theorise and empirically test these connections. By assessing an under researched example of technology transfer; the government's Teaching Company Scheme (TCS) this project provides a critique of the innovation process that contributes to theory and our appreciation of change in the UK government's premier technology transfer scheme (QR, 1996). Critical moments during the translation of ideas illustrate how elements that are linked to social control, economic exchange and communicability mediate the innovation process. Using analytical categories i.e. contradiction, slippage and dysfunctionality these are assessed in relation to the actions (coping strategies) of programme members over a two-year period. Drawing on Giddens' (1995) notion of the duality of structure this study explores the nature of the relationship between the task environment and institutional environment demonstrating how and why knowledge is both an enabler and barrier to organisational innovation.

Negotiating regional futures:the successes and failures of the West Midlands Regional Development Agency Network

The introduction of Regional Development Agencies (RDAs) in the English regions in 1999 presented a new set of collaborative challenges to existing local institutions. The key objectives of the new policy impetus emphasise increased joined-up thinking and holistic regional governance. Partners were enjoined to promote cross-sector collaboration and present a coherent regional voice. This study aims to evaluate the impact of an RDA on the partnership infrastructure of the West Midlands. The RDA network incorporates a wide spectrum of interest and organisations with diverse collaborative histories, competencies and capacities. The study has followed partners through the process over an eighteen-month period and has sought to explore the complexities and tensions of partnership working 'on the ground'. A strong qualitative methodology has been employed in generating 'thick descriptions' of the policy domain. The research has probed beyond the 'rhetoric' of partnerships and explores the sensitivities of the collaboration process. A number of theoretical frameworks have been employed, including policy network theory; partnership and collaboration theory; organisational learning; and trust and social capital. The structural components of the West Midlands RDA network are explored, including the structural configuration of the network and stocks of human and social capital assets. These combine to form the asset base of the network. Three sets of network behaviours are then explored, namely, strategy, the management of perceptions, and learning. The thesis explores how the combination of assets and behaviours affect, and in turn are affected by, each other. The findings contribute to the growing body of knowledge and understanding surrounding policy networks and collaborative governance.

User interface design support for the development of knowledge-based systems

The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Explaining process and performance in the co-production of knowledge:a comparative analysis of collaborative research projects

Despite considerable and growing interest in the subject of academic researchers and practising managers jointly generating knowledge (which we term ‘co-production’), our searches of management literature revealed few articles based on primary data or multiple cases. Given the increasing commitment to co-production by academics, managers and those funding research, it seems important to strengthen the evidence base about practice and performance in co-production. Literature on collaborative research was reviewed to develop a framework to structure the analysis of this data and relate findings to the limited body of prior research on collaborative research practice and performance. This paper presents empirical data from four completed, large scale co-production projects. Despite major differences between the cases, we find that the key success factors and the indicators of performances are remarkably similar. We demonstrate many, complex influences between factors, between outcomes, and between factors and outcomes, and discuss the features that are distinctive to co-production. Our empirical findings are broadly consonant with prior literature, but go further in trying to understand success factors’ consequences for performance. A second contribution of this paper is the development of a conceptually and methodologically rigorous process for investigating collaborative research, linking process and performance. The paper closes with discussion of the study’s limitations and opportunities for further research.

Organised for inward investment? Development agencies, local government, and firms in the inward investment process

Inward investment promotion and aftercare remain central aspects of local economic development for English Regional Development Agencies, Scottish and Welsh development bodies, and local authorities in Britain. In many cases, partnership and consultation mechanisms have become integral to attracting inward investment and providing aftercare. Inward investment is thus an important area in which to explore interinstitutional relations between agents operating along diverse spatial boundaries and with different responsibilities. In this paper we analyse the local and regional institutional structures and relations characterising the inward investment process in Britain using new survey data from local authorities, regional bodies, and inward investors. We find that promotional activities have clearly defined structures which are chiefly led by the regional level. Aftercare is characterised by more collaborative arrangements involving both regional bodies and local government. However, many bodies are little used, with competition and tension between partners remaining frequent within English regions, regardless of recent institutional changes designed to reduce such problems. In Scotland and Wales, however, their national institutions are not only widely used, but they create high levels of satisfaction from firms. Hence, England has yet to respond to the effective challenges of Scotland and Wales. The analysis also highlights the limited importance of all national, regional, and local public institutions in attracting inward investors and their subsequent aftercare. The critical inputs to business decisions appear to be driven chiefly by more general supply-side conditions (for example, general skills versus local public packages) and the general attractions of a particular location.

Integrating service user and practitioner expertise within a web-based system for collaborative mental-health risk and safety management

Objectives: To develop a decision support system (DSS), myGRaCE, that integrates service user (SU) and practitioner expertise about mental health and associated risks of suicide, self-harm, harm to others, self-neglect, and vulnerability. The intention is to help SUs assess and manage their own mental health collaboratively with practitioners. Methods: An iterative process involving interviews, focus groups, and agile software development with 115 SUs, to elicit and implement myGRaCE requirements. Results: Findings highlight shared understanding of mental health risk between SUs and practitioners that can be integrated within a single model. However, important differences were revealed in SUs' preferred process of assessing risks and safety, which are reflected in the distinctive interface, navigation, tool functionality and language developed for myGRaCE. A challenge was how to provide flexible access without overwhelming and confusing users. Conclusion: The methods show that practitioner expertise can be reformulated in a format that simultaneously captures SU expertise, to provide a tool highly valued by SUs. A stepped process adds necessary structure to the assessment, each step with its own feedback and guidance. Practice Implications: The GRiST web-based DSS (www.egrist.org) links and integrates myGRaCE self-assessments with GRiST practitioner assessments for supporting collaborative and self-managed healthcare.

Practice based learning approaches in collaborative design and engineering education:a case study investigation into the benefits of a crossdisciplinary practice based learning strategy

This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several cohorts to bring a valuable perspective to the approaches piloted across two similar university departments while trialling a number of innovative learning strategies. In addition to the concurrent institutional studies the work explores curriculum design that applies the principles of Co-Design, multidisciplinary and trans disciplinary learning, with both engineering and product design students working alongside each other through a practical problem solving learning approach known as the CDIO learning initiative (Conceive, Design Implement and Operate) [1]. The study builds on previous work presented at the 2010 EPDE conference: The Effect of Personality on the Design Team: Lessons from Industry for Design Education [2]. The subsequent work presented in this paper applies the findings to mixed design and engineering team based learning, building on the insight gained through a number of industrial process case studies carried out in current design practice. Developments in delivery also aligning the CDIO principles of learning through doing into a practice based, collaborative learning experience and include elements of the TRIZ creative problem solving technique [3]. The paper will outline case studies involving a number of mixed engineering and design student projects that highlight the CDIO principles, combined with an external industrial design brief. It will compare and contrast the learning experience with that of a KTP derived student project, to examine an industry based model for student projects. In addition key areas of best practice will be presented, and student work from each mode will be discussed at the conference.

Advanced predictive-analysis-based decision support for collaborative logistics networks

Purpose – The purpose of this paper is to examine challenges and potential of big data in heterogeneous business networks and relate these to an implemented logistics solution. Design/methodology/approach – The paper establishes an overview of challenges and opportunities of current significance in the area of big data, specifically in the context of transparency and processes in heterogeneous enterprise networks. Within this context, the paper presents how existing components and purpose-driven research were combined for a solution implemented in a nationwide network for less-than-truckload consignments. Findings – Aside from providing an extended overview of today’s big data situation, the findings have shown that technical means and methods available today can comprise a feasible process transparency solution in a large heterogeneous network where legacy practices, reporting lags and incomplete data exist, yet processes are sensitive to inadequate policy changes. Practical implications – The means introduced in the paper were found to be of utility value in improving process efficiency, transparency and planning in logistics networks. The particular system design choices in the presented solution allow an incremental introduction or evolution of resource handling practices, incorporating existing fragmentary, unstructured or tacit knowledge of experienced personnel into the theoretically founded overall concept. Originality/value – The paper extends previous high-level view on the potential of big data, and presents new applied research and development results in a logistics application.