Influence of impact angles on penetration rates of CRAs exposed to a high velocity multiphase flow

A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in a mixed gas - saltwater - sand multiphase flow at impact velocities up to 70 m/s. Artificial brine with a salt content of 27 g/1 was used as liquid phase. Sand content, with grain size below 150 µ, was 2.7 g/l brine. CO at a pressure of 15 bar was used as gas phase. The impact angle between jet stream (nozzle) and sample surface was varied between 30 and 90°. Rectangular stainless steel disc samples with a size of 20 × 15 × 5 mm were used. They were mechanically ground and polished prior to testing. Damaged surfaces of specimens exposed to the high velocity multiphase flow were investigated by stereo microscopy, scanning electron microscopy (SEM) and an optical device for 3D surface measurements. Furthermore, samples were investigated by applying atomic force microscopy (AFM), magnetic force microscopy (MFM) and nanoindentation. Influence of impact velocity and impact angle on penetration rates (mass loss rates) of two CRAs (UNS S30400 and N08028) are presented. Moreover effects of chemical composition and mechanical properties are critically discussed. © 2008 by NACE International.

Evaluation of Impact of Beam Size on Fibre Bragg Grating Fabrication

Fabrication of gratings has gone a long way since the onset by Kenneth Hill in 1976. Basic fabrication techniques such as holographic and phase-mask which have distinguishing advantages (variable wavelength, and high repeatability consecutively) have since been modified in an effort to combine the advantages of both methods. These basic methods are inherently simple and have few controls, they have been combined and modified over time to enable the possibility of fabricating gratings with complex modulation index and phase profiles.

Evaluation of impact of beam size on fibre Bragg grating fabrication

Fabrication of gratings has gone a long way since the onset by Kenneth Hill in 1976. Basic fabrication techniques such as holographic and phase-mask which have distinguishing advantages (variable wavelength, and high repeatability consecutively) have since been modified in an effort to combine the advantages of both methods. These basic methods are inherently simple and have few controls, they have been combined and modified over time to enable the possibility of fabricating gratings with complex modulation index and phase profiles.

The impact of performance measurement in strategic planning

Purpose – To investigate the impact of performance measurement in strategic planning process. Design/methodology/approach – A large scale survey was conducted online with Warwick Business School alumni. The questionnaire was based on the Strategic Development Process model by Dyson. The questionnaire was designed to map the current practice of strategic planning and to determine its most influential factors on the effectiveness of the process. All questions were close ended and a seven-point Likert scale used. The independent variables were grouped into four meaningful factors by factor analysis (Varimax, coefficient of rotation 0.4). The factors produced were used to build regression models (stepwise) for the five assessments of strategic planning process. Regression models were developed for the totality of the responses, comparing SMEs and large organizations and comparing organizations operating in slowly and rapidly changing environments. Findings – The results indicate that performance measurement stands as one of the four main factors characterising the current practice of strategic planning. This research has determined that complexity coming from organizational size and rate of change in the sector creates variation in the impact of performance measurement in strategic planning. Large organizations and organizations operating in rapidly changing environments make greater use of performance measurement. Research limitations/implications – This research is based on subjective data, therefore the conclusions do not concern the impact of strategic planning process' elements on the organizational performance achievements, but on the success/effectiveness of the strategic planning process itself. Practical implications – This research raises a series of questions about the use and potential impact of performance measurement, especially in the categories of organizations that are not significantly influenced by its utilisation. It contributes to the field of performance measurement impact. Originality/value – This research fills in the gap literature concerning the lack of large scale surveys on strategic development processes and performance measurement. It also contributes in the literature of this field by providing empirical evidences on the impact of performance measurement upon the strategic planning process.

Exploring the impact of e-business adoption on logistics processes:empirical evidence from the food industry

The objectives of the research were to identify factors that influence e-business adoption and its impact on logistics processes in the Greek food industry. Drawing on existing research, a conceptual framework and propositions were developed and six in depth case studies were carried out. In the framework, three major categories of influencing factors were distinguished: intra-enterprise, sector and supply chain factors. Findings suggest that e-business adoption is more affected by supply chain and sector factors, rather than intra-enterprise factors. Regarding the impact of e-business on logistics process, it seems that it is affected by the frequency of its use and it is greater in processes occurring at the company-customer interface. Finally, e-business impact is more related to the dimensions of time and quality, rather than cost improvements.

Performance of small and medium enterprises and the impact of environmental variables: evidence from Vietnam

thesis is developed from a real life application of performance evaluation of small and medium-sized enterprises (SMEs) in Vietnam. The thesis presents two main methodological developments on evaluation of dichotomous environment variable impacts on technical efficiency. Taking into account the selection bias the thesis proposes a revised frontier separation approach for the seminal Data Envelopment Analysis (DEA) model which was developed by Charnes, Cooper, and Rhodes (1981). The revised frontier separation approach is based on a nearest neighbour propensity score matching pairing treated SMEs with their counterfactuals on the propensity score. The thesis develops order-m frontier conditioning on propensity score from the conditional order-m approach proposed by Cazals, Florens, and Simar (2002), advocated by Daraio and Simar (2005). By this development, the thesis allows the application of the conditional order-m approach with a dichotomous environment variable taking into account the existence of the self-selection problem of impact evaluation. Monte Carlo style simulations have been built to examine the effectiveness of the aforementioned developments. Methodological developments of the thesis are applied in empirical studies to evaluate the impact of training programmes on the performance of food processing SMEs and the impact of exporting on technical efficiency of textile and garment SMEs of Vietnam. The analysis shows that training programmes have no significant impact on the technical efficiency of food processing SMEs. Moreover, the analysis confirms the conclusion of the export literature that exporters are self selected into the sector. The thesis finds no significant impact from exporting activities on technical efficiency of textile and garment SMEs. However, large bias has been eliminated by the proposed approach. Results of empirical studies contribute to the understanding of the impact of different environmental variables on the performance of SMEs. It helps policy makers to design proper policy supporting the development of Vietnamese SMEs.

Objects and the production of technological forms of life:understanding organisational arrangements from a postsocial perspective

Objects are produced within, and simultaneously affect, the process of organizing as a consequence of their interaction within social collectives. This paper discusses the impact and influences of the growth of post-social relations, between human and technological objects, on social and organisational arrangements. The paper presents a discussion largely at the conceptual level and draws from a variety of literatures, including the burgeoning sociology of science literature. The discussion in this paper is based on a view that posits the growth of intimate links with epistemic objects within organisations and society. Organising through networks of post-social relations increasingly comes to affect the manner in which differing groups of organisational participants, and particularly various categories of knowledge workers, experience time and spatial arrangements within organisations.

Finite element analysis of particle impact problems

Particle impacts are of fundamental importance in many areas and there has been a renewed interest in research on particle impact problems. A comprehensive investigation of the particle impact problems, using finite element (FE) methods, is presented in this thesis. The capability of FE procedures for modelling particle impacts is demonstrated by excellent agreements between FE analysis results and previous theoretical, experimental and numerical results. For normal impacts of elastic particles, it is found that the energy loss due to stress wave propagation is negligible if it can reflect more than three times during the impact, for which Hertz theory provides a good prediction of impact behaviour provided that the contact deformation is sufficiently small. For normal impact of plastic particles, the energy loss due to stress wave propagation is also generally negligible so that the energy loss is mainly due to plastic deformation. Finite-deformation plastic impact is addressed in this thesis so that plastic impacts can be categorised into elastic-plastic impact and finite-deformation plastic impact. Criteria for the onset of finite-deformation plastic impacts are proposed in terms of impact velocity and material properties. It is found that the coefficient of restitution depends mainly upon the ratio of impact velocity to yield Vni/Vy0 for elastic-plastic impacts, but it is proportional to [(Vni/Vy0)*(Y/E*)]-1/2, where Y /E* is the representative yield strain for finite-deformation plastic impacts. A theoretical model for elastic-plastic impacts is also developed and compares favourably with FEA and previous experimental results. The effect of work hardening is also investigated.

Elasto-plastic impact of fine particles and fragmentation of small agglomerates

Surface deposition of dense aerosol particles is of major concern in the nuclear industry for safety assessment. This study presents theoretical investigations and computer simulations of single gas-born U3O8 particles impacting with the in-reactor surface and the fragmentation of small agglomerates. A theoretical model for elasto-plastic spheres has been developed and used to analyse the force-displacement and force-time relationships. The impulse equations, based on Newton's second law, are applied to govern the tangential bouncing behaviour. The theoretical model is then incorporated into the Distinct Element Method code TRUBAL in order to perform computer simulated tests of particle collisions. A comparison of simulated results with both theoretical predictions and experimental measurements is provided. For oblique impacts, the results in terms of the force-displacement relationship, coefficients of restitution, trajectory of the impacting particle, and distribution of kinetic energy and work done during the process of impact are presented. The effects of Poisson's ratio, friction, plastic deformation and initial particle rotation on the bouncing behaviour are also discussed. In the presence of adhesion an elasto-plastic collision model, which is an extension to the JKR theory, is developed. Based on an energy balance equation the critical sticking velocity is obtained. For oblique collisions computer simulated results are used to establish a set of criteria determining whether or not the particle bounces off the target plate. For impact velocities above the critical sticking value, computer simulated results for the coefficients of restitution and rebound angles of the particle are presented. Computer simulations of fracture/fragmentation resulting from agglomerate-wall impact have also been performed, where two randomly generated agglomerates (one monodisperse, the other polydisperse), each consisting of 50 primary particles are used. The effects of impact angle, local structural arrangements close to the impact point, and plastic deformation at the contacts on agglomerate damage are examined. The simulated results show a significant difference in agglomerate strength between the two assemblies. The computer data also shows that agglomerate damage resulting from an oblique impact is determined by the normal velocity component rather than the impact speed.

Adolescents and the experience of parental divorce:including reference to the expectations of teacher trainees

The aims of this study were to investigate the impact of parental divorce on adolescents, and the expectations of teacher trainees with regard to children of divorce. The literature related to children of divorce is reviewed and the results of interviews with a sample of recently divorced custodial parents and their adolescent children, using a structured interview schedule, are described. The semantic differential technique was used to obtain ratings of a sample of teacher trainees' expectations of children of divorce as compared with their ratings of several other categories of children. The results of the interviews with parents and their adolescent children suggested that parental divorce does not necessarily interfere with adolescent development and that for some adolescents the reduction of conflict in the home might enhance normal development. They also suggest that adolescents would prefer to live in a one parent home rather than a two parent home which is fraught with conflict, and that it is preferable for parents who are unable to resolve such conflict in any other way to separate rather than allow it to persist. The ratings of children of divorce by teacher trainees suggest that they hold more negative expectations of such children than of other groups • such as adopted children. The contrast between this finding and the results of the interviews with adolescents and their parents lends some support to the existence of the divorce myth; that is, the cultural belief that divorce has the inherent power to make people unhappy. The implications for policy, practice and further research are discussed.

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques.By combining two variants of the Free Disposal Hull (FDH) methods (order-m and order-?) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI.These results show the benefits of performing the analysis using quantile regression.

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques. By combining two variants of the Free Disposal Hull (FDH) methods (order- m and order- α) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI. These results show the benefits of performing the analysis using quantile regression. © 2013 Elsevier B.V.

Coping with extreme weather:strategies of construction SMEs

Weather extremes have created a considerable impact on Small and Medium-sized Enterprises (SMEs) in the UK during the recent years, especially on SMEs in the construction sector. Evidence in relation to the recent weather extremes have demonstrated that SMEs are some of the worst impacted by the Extreme Weather Events (EWEs) and have confirmed them as a highly vulnerable section of the UK economy to the impact of extreme weather. This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. Whilst construction has been perceived as a sector significantly vulnerable to the impacts of EWEs, there is scant evidence of how construction SMEs respond to such events and cope with their impact. Based on the evidence emerged from case studies of construction SMEs, current coping strategies of construction SMEs were identified. Some of the strategies identified were focused at organisational level whereas others were focused at project level. Further, some of the strategies were general risk management / business continuity strategies whereas others have been specifically developed to address the risk of EWEs. Accordingly, coping strategies can be broadly categorised based on their focus; i.e. those focused at project or organisational level, and based on the risks that they seek to address; i.e. business / continuity risks in general or EWE risk specifically. By overlapping these two aspects; their focus and risks that they seek to address, four categories of coping strategies can be devised. There are; general risk management strategies focused at business level, general risk management strategies focused at project level, EWE specific strategies focused at business level, and EWE specific strategies focused at project level. It is proposed that for a construction SME to effectively cope with the impact of EWEs and develop their resilience against EWEs a rich mix of these coping strategies are required to suite the particular requirements of the business.

The Long-Term impact of Business Support? - Exploring the Role of Evaluation Timing using Micro Data

The original contribution of this work is threefold. Firstly, this thesis develops a critical perspective on current evaluation practice of business support, with focus on the timing of evaluation. The general time frame applied for business support policy evaluation is limited to one to two, seldom three years post intervention. This is despite calls for long-term impact studies by various authors, concerned about time lags before effects are fully realised. This desire for long-term evaluation opposes the requirements by policy-makers and funders, seeking quick results. Also, current ‘best practice’ frameworks do not refer to timing or its implications, and data availability affects the ability to undertake long-term evaluation. Secondly, this thesis provides methodological value for follow-up and similar studies by using data linking of scheme-beneficiary data with official performance datasets. Thus data availability problems are avoided through the use of secondary data. Thirdly, this thesis builds the evidence, through the application of a longitudinal impact study of small business support in England, covering seven years of post intervention data. This illustrates the variability of results for different evaluation periods, and the value in using multiple years of data for a robust understanding of support impact. For survival, impact of assistance is found to be immediate, but limited. Concerning growth, significant impact centres on a two to three year period post intervention for the linear selection and quantile regression models – positive for employment and turnover, negative for productivity. Attribution of impact may present a problem for subsequent periods. The results clearly support the argument for the use of longitudinal data and analysis, and a greater appreciation by evaluators of the factor time. This analysis recommends a time frame of four to five years post intervention for soft business support evaluation.