Survey of influence of biomass mineral matter in thermochemical conversion of short rotation willow coppice

Short rotation willow coppice (SRC) has been investigated for the influence of K, Ca, Mg, Fe and P on its pyrolysis and combustion behaviours. These metals are the typical components that appear in biomass. The willow sample was pretreated to remove salts and metals by hydrochloric acid, and this demineralised sample was impregnated with each individual metal at the same mol g biomass (2.4 × 10 mol g demineralised willow). Characterisation was performed using thermogravimetric analysis (TGA), and differential thermal analysis (DTA) for combustion. In pyrolysis, volatile fingerprints were measured by means of pyrolysis-gas chromatography-mass spectrometry (PY-GC-MS). The yields and distribution of pyrolysis products have been influenced by the presence of the catalysts. Most notably, both potassium and phosphorous strongly catalysed the pyrolysis, modifying both the yield and distribution of reaction products. Temperature programmed combustion TGA indicates that combustion of biomass char is catalysed by all the metals, while phosphorus strongly inhibits the char combustion. In this case, combustion rates follow the order for volatile release/combustion: P>K>Fe>Raw>HCl>Mg>Ca, and for char combustion K>Fe>raw>Ca-Mg>HCl>P. The samples impregnated with phosphorus and potassium were also studied for combustion under flame conditions, and the same trend was observed, i.e. both potassium and phosphorus catalyse the volatile release/combustion, while, in char combustion, potassium is a catalyst and phosphorus a strong inhibitor, i.e. K impregnated>(faster than) raw>demineralised»P impregnated.

Dynamics of pulsed flow in an elastic tube

Internal haemorrhage, often leading to cardio-vascular arrest happens to be one of the prime sources of high fatality rates in mammals. We propose a simplistic model of fluid flow in our attempt to specify the location of the haemorrhagic spot, which, if located accurately, could possibly be operated leading to an instant cure. The model we employ for the purpose is basically fluid mechanical in origin and consists of a viscous fluid, pumped by a periodic force and flowing through an elastic tube. The analogy is with that of blood, pumped from the heart and flowing through an artery or vein. Our results, aided by graphical illustrations, match reasonably well with experimental observations.

Widening access to Higher Education:an evaluative case study of a foundation year alternative to access

Universities are encouraged to widen access to a broad range of applicants, including mature students taking Access qualifications. Admissions tutors can find it difficult to compare and choose between Access and A-level applications, and Access applicants for popular courses may be disadvantaged relative to students with good A-levels. In this evaluative case study a foundation year designed to avoid Access selection problems and widen participation in psychology, biology, optometry and pharmacy is reviewed. Progression and success rates are compared to national averages for Access courses and issues in Foundation Year management considered. The Foundation Year is rejected as unsatisfactory and it is concluded that widening participation for mature students can be achieved through Access courses. Difficulties in achieving this for high-demand courses in leading universities are discussed.

An institutional perspective on management accounting change in the public sector : a case study from Canada

This thesis reports on a four-year field study conducted at the Saskatchewan regional office of the Department of Indian Affairs and Northern Development, a large department of the Government of Canada. Over the course of the study, a sweeping government-wide accounting reform took place entitled the Financial Information Strategy. An ethnographic study was conducted that documented the management accounting processes in place at the regional office prior to the Financial Information Strategy reform, the organization’s adoption of the new accounting system associated with this initiative, and the state of the organization’s management accounting system once the implementation was complete. This research, therefore, captures in detail a management accounting change process in a public sector organization. This study employs an interpretive perspective and draws on institution theory as a theoretical framework. The concept of loose coupling and insights from the literature on professions were also employed in the explanation-building process for the case. This research contributes to institution theory and the study of management accounting change by recognizing conflicting institutional forces at the organizational level. An existing Old Institutional Economics-based conceptual framework for management accounting change is advanced and improved upon through the development of a new conceptual framework that incorporates the influence of wider institutional forces, the concepts of open and closed organizational systems and loose coupling, and the recognition of varying rates of change and institutionalization of organizational activity sets. Our understanding of loose coupling is enhanced by the interpretation of institutional influences developed in this study as is the role of professionalization as a normative influence in public sector organizations.

The water use rates of reedbed and wet woodland habitats

To create hydrologically sustainable wetlands, knowledge of the water use requirements of target habitats must be known. Extensive literature reviews highlighted a dearth of water-use data associated with large reedbeds and wet woodland habitats and in response to this field experiments were established. Field experiments to measure the water use rates of large reedbeds [ET(Reed)] were completed at three sites within the UK. Reference Crop Evapotranspiration [ETo] was calculated and mean monthly crop coefficients [Kc(Reed)] were developed. Kc(Reed) was less than 1 during the growing season (March to September), ranging between 0.22 in March and reaching a peak of 0.98 in June. The developed coefficients compare favourably with published data from other large reedbed systems and support the premise that the water use of large reedbeds is lower than that from small/fringe reedbeds. A methodology for determining water use rates from wet woodland habitats (UK NVC Code: W6) is presented, in addition to provisional ET(W6) rates for two sites in the UK. Reference Crop Evapotranspiration [ETo] data was used to develop Kc(W6) values which ranged between 0.89 (LV Lysimeter 1) and 1.64 (CH Lysimeter 2) for the period March to September. The data are comparable with relevant published data and show that the water use rates of wet woodland are higher than most other wetland habitats. Initial observations suggest that water use is related to the habitat’s establishment phase and the age and size of the canopy tree species. A theoretical case study presents crop coefficients associated with wetland habitats and provides an example water budget for the creation of a wetland comprising a mosaic of wetland habitats. The case study shows the critical role that the water use of wetland habitats plays within a water budget.

Time scale analysis for fluidized bed melt granulation I: granule-granule and granule-droplet collision rates

Fluidized bed spray granulators (FBMG) are widely used in the process industry for particle size growth; a desirable feature in many products, such as granulated food and medical tablets. In this paper, the first in a series of four discussing the rate of various microscopic events occurring in FBMG, theoretical analysis coupled with CFD simulations have been used to predict granule–granule and droplet–granule collision time scales. The granule–granule collision time scale was derived from principles of kinetic theory of granular flow (KTGF). For the droplet–granule collisions, two limiting models were derived; one is for the case of fast droplet velocity, where the granule velocity is considerable lower than that of the droplet (ballistic model) and another for the case where the droplet is traveling with a velocity similar to the velocity of the granules. The hydrodynamic parameters used in the solution of the above models were obtained from the CFD predictions for a typical spray fluidized bed system. The granule–granule collision rate within an identified spray zone was found to fall approximately within the range of 10-2–10-3 s, while the droplet–granule collision was found to be much faster, however, slowing rapidly (exponentially) when moving away from the spray nozzle tip. Such information, together with the time scale analysis of droplet solidification and spreading, discussed in part II and III of this study, are useful for probability analysis of the various event occurring during a granulation process, which then lead to be better qualitative and, in part IV, quantitative prediction of the aggregation rate.

The effects of coloured light filter overlays on reading rates in age-related macular degeneration

Purpose: To determine the effect of coloured light filter overlays on reading rates for people with age-related macular degeneration (AMD). Method: Using a prospective clinical trial design, we examined the null hypothesis that coloured light filter overlays do not improve reading rates in AMD when compared to a clear filter. Reading rates for 12 subjects with non-exudative AMD, associated with a relative scotoma and central fixation (mean age 81 years, SD 5.07 years) were determined using the Rate of Reading Test® (printed, nonsense, lower case sans serif, stationary text) with 10 different, coloured light filter overlays (Intuitive Overlays®; figures in brackets are percentage transmission values); rose (78%), pink (78%), purple (67%), aqua (81%), blue (74%), lime-green (86%), mint-green (85%), yellow (93%), orange (83%) and grey (71%). A clear overlay (Roscolene # 00) (360 cdm-2) with 100% transmittance was used as a control. Results: ANOVA indicated that there was no statistically significant difference in reading rates with the coloured light filter overlays compared to the clear filter. Furthermore, chi-squared analysis indicated that the rose, purple and blue filters had a significantly poorer overall ranking in terms of reading rates compared to the other coloured and clear light filters. Conclusion: Coloured light filter overlays are unlikely to provide a clinically significant improvement in reading rates for people with non-exudative AMD associated with a relative scotoma and central fixation. Copyright © Acta Ophthalmol Scand 2004.

Designing a mobile transcriber application for adult literacy education:a case study

Functional illiteracy rates amongst 16 to 65 year-olds in the world’s richest countries are alarmingly high. This research looks at the use of mobile technology to support experiential adult literacy education whereby adult literacy students are able to construct knowledge throughout their daily activities whilst being supported in their daily literacy challenges. This research has two primary goals: (a) to design a mobile application to support adult literacy education; and (b) to identify appropriate processes by which this design could be achieved given the nature and specific requirements of the target users. The means by which both go also were achieved, together with lessons learned, are discussed. A prototype mobile application to meet the needs of adult literacy students is also introduced.

Accommodating special needs users in the evaluation of an m-Learning application:a case study

Adult illiteracy rates are alarmingly high worldwide. The portability, affordability, and ease of use of mobile (or handheld) devices offer a realistic opportunity to provide novel, context-sensitive literacy resources to adults with limited literacy skills. To this end, we developed the concept of ALEX – a mobile Adult Literacy support application for EXperiential learning (Lumsden et al., 2005). On the basis of a medium-fidelity prototype of this application, we conducted an evaluation of ALEX using participants from our in tended user group. This evaluation had two goals: (a) to assess the usefulness of the ALEX concept and the usability of its current design; and (b) to reflect on the appropriateness of our evaluation process given the literacy-related needs of our participants. This paper outlines our approach to this evaluation as well as the results we obtained and our reflections on the process.

An examination of the determinants of entrepreneurship at the regional level:the case of East Midlands region

Despite the importance of new firms to the economy, determinants of start-ups have mainly been examined at a country level and discussion of regional entrepreneurial activity has received less attention. Since there are significant variations in entrepreneurship rates across and within countries, such an investigation at a regional level would help in gaining an in depth understanding of the impact of the individual level resource endowments and neighbourhood characteristics on an individual’s decision to engage in entrepreneurial activity. The main aim of the thesis is to explore various theories of entrepreneurship and develop integrated frameworks for examining the determinants of entrepreneurial activity at a neighbourhood level in the East Midlands region in England. The specific objectives of the thesis are to examine how the individual level resources and the neighbourhood characteristics: (i) combine to influence an individual to engage in the different stages of the entrepreneurial process, (ii) influence natives and migrants to engage in start up activity and (iii) influence women and men to become self-employed and ambitious entrepreneurs. In terms of the methodology, the empirical analysis is based on two databases combined: 2006 to 2009 GEM East Midlands region and the English Index of Multiple Deprivation dataset. Based on the critical review of the literature on entrepreneurship the thesis develop theoretical frameworks which led to formulate hypotheses related to the differentiated impact of both individual and neighbourhood level factors on the propensity of an individual to be involved in entrepreneurial activity. The findings indicate that the determinants of entrepreneurial activity vary with human, financial and the local environment factors affecting the entrepreneurial process. Finally, the thesis calls for caution when developing and applying generic and specific policy measures aimed at promoting entry into entrepreneurship.

Understanding and improving the manufacturing and changeover process in Saudi Arabian business - a multiple case study approach

The importance of the changeover process in the manufacturing industry is becoming widely recognised. Changeover is a complete process of changing between the manufacture of one product to manufacture of an alternative product until specified production and quality rates are reached. The initiatives to improve changeover exist in industry, as better changeover process typically contribute to improved quality performance. A high-quality and reliable changeover process can be achieved through implementation of continuous or radical improvements. This research examines the changeover process of Saudi Arabian manufacturing firms because Saudi Arabia’s government is focused on the expansion of GDP and increasing the number of export manufacturing firms. Furthermore, it is encouraging foreign manufacturing firms to invest within Saudi Arabia. These initiatives, therefore, require that Saudi manufacturing businesses develop the changeover practice in order to compete in the market and achieve the government’s objectives. Therefore, the aim of this research is to discover the current status of changeover process implementation in Saudi Arabian manufacturing businesses. To achieve this aim, the main objective of this research is to develop a conceptual model to understand and examine the effectiveness of the changeover process within Saudi Arabian manufacturing firms, facilitating identification of those activities that affect the reliability and high-quality of the process. In order to provide a comprehensive understanding of this area, this research first explores the concept of quality management and its relationship to firm performance and the performance of manufacturing changeover. An extensive body of literature was reviewed on the subject of lean manufacturing and changeover practice. A research conceptual model was identified based on this review, and focus was on providing high-quality and reliable manufacturing changeover processes during set-up in a dynamic environment. Exploratory research was conducted in sample Saudi manufacturing firms to understand the features of the changeover process within the manufacturing sector, and as a basis for modifying the proposed conceptual model. Qualitative research was employed in the study with semi-structured interviews, direct observations and documentation in order to understand the real situation such as actual daily practice and current status of changeover process in the field. The research instrument, the Changeover Effectiveness Assessment Tool (CEAT) was developed to evaluate changeover practices. A pilot study was conducted by examining the CEAT, proposed for the main research. Consequently, the conceptual model was modified and CEAT was improved in response to the pilot study findings. Case studies have been conducted within eight Saudi manufacturing businesses. These case studies assessed the implementation of manufacturing changeover practice in the lighting and medical products sectors. These two sectors were selected based on their operation strategy which was batch production as well as the fact that they fulfilled the research sampling strategy. The outcomes of the research improved the conceptual model, ultimately to facilitate the firms’ adoption and rapid implementation of a high-quality and reliability changeover during the set-up process. The main finding of this research is that Quality’s factors were considering the lowest levels comparing to the other factors which are People, Process and Infrastructure. This research contributes to enable Saudi businesses to implement the changeover process by adopting the conceptual model. In addition, the guidelines for facilitating implementation were provided in this thesis. Therefore, this research provides insight to enable the Saudi manufacturing industry to be more responsive to rapidly changing customer demands.