Strategies for performance improvement in the Chinese chemical industry:evidence from case study investigations

Purpose – This paper sets out to explore the proposition that building competences is more effective than privatisation and restructuring to improve performance in the Chinese chemical industry. Design/methodology/approach – Case study research has been undertaken in the Chinese chemical industry. The two case companies provide representative data on the factors under investigation. The case investigations that are described were complemented by a survey, the results of which have been reported elsewhere. Findings – Results obtained from the research show that privatisation of Chinese state-owned enterprises is not always an effective strategy to improve performance. In the case study companies, the development of core competences was more effective in enhancing performance. Research limitations/implications – The research results are limited by the scope of the study, which was carried out in the Chinese chemical industry. They are also based on in-depth case investigations in only two companies, but are supported by a large-scale survey reported elsewhere. The results have implications for academic researchers interested in China's privatisation programme. Practical implications – The research has practical implications for companies outside China that are considering collaborative operations with Chinese companies or investing in joint ventures. It also has implications for suppliers or customers of Chinese companies. Originality/value – The paper is based on original case study investigations carried out in Chinese enterprises and is supported by a survey of representative companies in China's chemical sector. Value is derived from understanding the basis of improved performance in the companies studied.

The interaction between the implementation of an occupational health and safety management system and safety culture:a case study in the rubber industry

A prominent theme emerging in Occupational Health and Safety (OSH) is the development of management systems. A range of interventions, according to a prescribed route detailed by one of the management systems, can be introduced into an organisation with some expectation of improved OSH performance. This thesis attempts to identify the key influencing factors that may impact upon the process of introducing interventions, (according to B88800: 1996, Guide to Implementing Occupational Health and Safety Management Systems) into an organisation. To help identify these influencing factors a review of possible models from the sphere of Total Quality Management (TQM) was undertaken and the most suitable TQM model selected for development and use in aSH. By anchoring the aSH model's development in the reviewed literature a range ofeare, medium and low level influencing factors were identified. This model was developed in conjunction with the research data generated within the case study organisation (rubber manufacturer) and applied to the organisation. The key finding was that the implementation of an OSH intervention was dependant upon three broad vectors of influence. These are the Incentive to introduce change within an organisation which refers to the drivers or motivators for OSH. Secondly the Ability within the management team to actually implement the changes refers to aspects, amongst others, such as leadership, commitment and perceptions of OSH. Ability is in turn itself influenced by the environment within which change is being introduced. TItis aspect of Receptivity refers to the history of the plant and characteristics of the workforce. Aspects within Receptivity include workforce profile and organisational policies amongst others. It was found that the TQM model selected and developed for an OSH management system intervention did explain the core influencing factors and their impact upon OSH performance. It was found that within the organisation the results that may have been expected from implementation of BS8800:1996 were not realised. The OSH model highlighted that given the organisation's starting point, a poor appreciation of the human factors of OSH, gave little reward for implementation of an OSH management system. In addition it was found that general organisational culture can effectively suffocate any attempts to generate a proactive safety culture.

Total quality management in English language teaching:a case study in Turkish higher education

The need to improve the management of language learning organizations in the light of the trend toward mass higher education and of the use of English as a world language was the starting point of this thesis. The thesis aims to assess the relevance, adequacy and the relative success of Total Quality Management (TQM) as a management philosophy. Taking this empirical evidence a TQM-oriented management project in a Turkish Higher Education context, the thesis observes the consequences of a change of organizational culture, with specific reference to teachers' attitudes towards management. Both qualitative and quantitative devices are employed to plot change and the value of these devices for identifying such is considered. The main focus of the thesis is the Soft S's (Shared Values, Style, Staff and Skills) of an organization rather than the Hard S's (System, Structure, Strategy). The thesis is not concerned with the teaching and learning processes, though the PDCA cycle (the Action Research Cycle) did play a part in the project for both teachers and the researcher involved in this study of organizational development. Both before the management project was launched, and at the end of the research period, the external measurement devices (Harrison's Culture Specification Device and Hofstede's VSM) were used to describe the culture of the Centre. During the management project, internal measurement devices were used to record the change including middle-management style change (the researcher in this case). The time period chosen for this study was between September 1991 and June 1994. During this period, each device was administered twice within a specific time period, ranging from a year to 32 months.

An institutional perspective on management accounting change in the public sector : a case study from Canada

This thesis reports on a four-year field study conducted at the Saskatchewan regional office of the Department of Indian Affairs and Northern Development, a large department of the Government of Canada. Over the course of the study, a sweeping government-wide accounting reform took place entitled the Financial Information Strategy. An ethnographic study was conducted that documented the management accounting processes in place at the regional office prior to the Financial Information Strategy reform, the organization’s adoption of the new accounting system associated with this initiative, and the state of the organization’s management accounting system once the implementation was complete. This research, therefore, captures in detail a management accounting change process in a public sector organization. This study employs an interpretive perspective and draws on institution theory as a theoretical framework. The concept of loose coupling and insights from the literature on professions were also employed in the explanation-building process for the case. This research contributes to institution theory and the study of management accounting change by recognizing conflicting institutional forces at the organizational level. An existing Old Institutional Economics-based conceptual framework for management accounting change is advanced and improved upon through the development of a new conceptual framework that incorporates the influence of wider institutional forces, the concepts of open and closed organizational systems and loose coupling, and the recognition of varying rates of change and institutionalization of organizational activity sets. Our understanding of loose coupling is enhanced by the interpretation of institutional influences developed in this study as is the role of professionalization as a normative influence in public sector organizations.

Internal branding to influence employees' brand promise delivery:a case study in Thailand

Purpose – The purpose of this paper is to understand the internal branding process from the perspective of service providers in Thailand. It will reveal the key internal branding mechanisms and empirically assess the relationship between internal branding and employees' brand attitudes and performance. Design/methodology/approach – A case study representing the Thai hotel industry is adopted with mixed methodologies. In-depth interviews are first carried out with 30 customer-interface employees in six major hotels in Thailand. On a census basis, a quantitative survey with 699 respondents from five major hotels in Thailand follows. Findings – Internal branding coordinating marketing with human resource management has a statistically significant impact on attitudinal and behavioural aspects of employees in their delivery of the brand promise. As employees' brand commitment do not have a statistically significant relationship with employees' brand performance, it is not regarded as a mediator in the link between internal branding and employees' brand performance. Practical implications – A number of significant managerial implications are drawn from this study, for example using both internal communication and training to influence employees' brand-supporting attitudes and behaviours. Still, it should be noted that the effect of internal branding on employee behaviours could be dependent on the extent to which it influences their brand attitudes. Originality/value – The paper provides valuable insights, from the key internal audience's perspectives, into an internal branding process. It has empirically shown the relationship between internal branding and the behavioural outcome as well as the partial meditating effects of employees' brand identification, commitment and loyalty.

The impact of the language barrier on the management of multinational companies : a case study and survey, based exploration of the impact of the language barrier on the strategies, policies and systems by which multinational companies manage their subsidaries

The thesis begins with a conceptual model of the way that language diversity affects the strategies, organisation and subsidiary control policies of multinational companies. The model is based solely on the researcher'’ personal experience of working in a variety of international management roles, but in Chapter 2 a wide-ranging review of related academic literature finds evidence to support the key ideas. The model is developed as a series of propositions which are tested in a comparative case study, refined and then re-tested in a global survey of multinational subsidiaries. The principal findings of the empirical phases of the thesis endorse the main tenets of the model: - That language difference between parent and subsidiary will impair communication, create mistrust and impede relationship development. - That subsequently the feelings of uncertainty, suspicion and mistrust will influence the decisions taken by the parent company. - They will have heightened sensitivity to language issues and will implement policies to manage language differences. - They will adopt low-risk strategies in host countries where they are concerned about language difference. - They will use organisational and manpower strategies to minimise the consequences and risks of the communications problems with the subsidiary. - As a consequence the level of integration and knowledge flow between parent and subsidiary will be curtailed. - They will adopt styles of control that depend least on their ability to communicate with their subsidiary. Although there is adequate support for all of the above conclusions, on some key points the evidence of the Case Studies and Survey is contradictory. The thesis, therefore, closes with an agenda for further research that would address these inconsistencies.

The control of technological change in the motor industry:a case study

This thesis is based upon a case study of the introduction of automated production technologies at the Longbridge plant of British Leyland in the period 1978 to 1980.The investment in automation was part of an overall programme of modernization to manufacture the new 'Mini Metro' model. In the first Section of the thesis, the different theoretical perspectives on technological change are discussed. Particular emphasis is placed upon the social role of management as the primary controllers of technological change. Their actions are seen to be oriented towards the overall strategy of the firm, integrating the firm's competitive strategy with production methods and techniques.This analysis is grounded in an examination of British Leyland's strategies during the 1970s.. The greater part of the thesis deals with the efforts made by management to secure their strategic objectives in the process of technological change against the conflicting claims of their work-force. Examination of these efforts is linked to the development of industrial relations conflict at Longbridge and in British Leyland as a whole.Emphasis is placed upon the struggle between management in pursuit of their version of efficiency and the trade unions in defence of job controls and demarcations. The thesis concludes that the process of technological change in the motor industry is controlled by social forces,with the introduction of new technologies being closely intertwined with management!s political relations with the trade unions.

Brand-driven leadership for change management in retailing

Change management theorists largely overlook using the brand as a vehicle for change. Similarly, while branding has become an increasingly popular research and business topic, the branding literature appears to neglect change management. Our research bridges this gap through the development of brand identity as the main driver of organizational renewal. In the article we provide insights into brand-driven leadership for change which have been develope by collaborative action research with CEOs and owners of retail firms over a twenty year period. In contrast to the usual planning of change attempting to fit the firm to external trends and considering internal resources our brand-driven approach is based on resonance with consumers by the use of external socio-cultural meanings in society. We highlight phases in the development of brand identity by reference to a prototypical retail case study and presenta framework to help managers with brand-driven leadership for change.

Measurement of project management performance:a case study in the Indian oil industry

Eight steps for projectizing continuous improvement to deliver desired change

A contingency theory perspective on the risk management control system within Birmingham City Council

In recent years the topic of risk management has moved up the agenda of both government and industry, and private sector initiatives to improve risk and internal control systems have been mirrored by similar promptings for change in the public sector. Both regulators and practitioners now view risk management as an integral part of the process of corporate governance, and an aid to the achievement of strategic objectives. The paper uses case study material on the risk management control system at Birmingham City Council to extend existing theory by developing a contingency theory for the public sector. The case demonstrates that whilst the structure of the control system fits a generic model, the operational details indicate that controls are contingent upon three core variables—central government policies, information and communication technology and organisational size. All three contingent variables are suitable for testing the theory across the broader public sector arena.

Risk management in organizations:an integrated case study approach

In any organization, risk plays a huge role in the success or failure of any business endeavour. Measuring and managing risk is a difficult and often complicated task and the global financial crisis of the late noughties can be traced to a worldwide deficiency in risk management regimes. One of the problems in understanding how best to manage risk is a lack of detailed examples of real world practice. In this accessible textbook the author sets the world of risk management in the context of the broader corporate governance agenda, as well as explaining the core elements of a risk management system. Material on the differences between risk management and internal auditing is supplemented by a section on the professionalization of risk – a relatively contemporary evolution. Enterprise risk management is also fully covered. With a detailed array of risk management cases – including Tesco, RBS and the UK government – lecturers will find this a uniquely well researched resource, supplemented by materials that enable the cases to be easily integrated into the classroom. Risk managers will be delighted with the case materials made available for the first time with the publication of this book.

Linking risk management to strategic controls:a case study of Tesco plc

Definitions and perceptions of the role and styles of risk management, and performance management/strategic control systems have evolved over time, but it can be argued that risk management is primarily concerned with ensuring the achievement of strategic objectives. This paper shows the extent of overlap between a broad-based view of risk management, namely Enterprise Risk Management (ERM), and the balanced scorecard, which is a widely used strategic control system. A case study of one of the UK's largest retailers, Tesco plc, is used to show how ERM can be introduced as part of an existing strategic control system. The case demonstrates that, despite some differences in lines of communications, the strategic controls and risk controls can be used to achieve a common objective. Adoption of such an integrated approach, however, has implications for the profile of risk and the overall risk culture within an organisation.

A case study analysis on information and communication technology usage in small logistics service companies

The impact of ICT (information and communications technology) on the logistics service industry is reshaping its organisation and structure. Within this process, the nature of changes resulting from ICT dissemination in small 3PLs (third party logistics providers) is still unclear, although a large number of logistics service markets, especially in the EU context, are populated by a high number of small 3PLs. In addition, there is still a gap in the literature where the role of technological capability in small 3PLs is seriously underestimated. This gives rise to the need to develop investigation in this area. The paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

Implementing a knowledge management system within an NHS hospital:a case study exploring the roll-out of an Electronic Patient Record (EPR)

This research aims to contribute to understanding the implementation of knowledge management systems (KMS) in the field of health through a case study, leading to theory building and theory extension. We use the concept of the business process approach to knowledge management as a theoretical lens to analyse and explore how a large teaching hospital developed, executed and practically implemented a KMS. A qualitative study was conducted over a 2.5 year period with data collected from semi-structured interviews with eight members of the strategic management team, 12 clinical users and 20 patients in addition to non-participant observation of meetings and documents. The theoretical propositions strategy was used as the overarching approach for data analysis. Our case study provides evidence that true patient centred approaches to supporting care delivery with a KMS benefit from process thinking at both the planning and implementation stages, and an emphasis on the knowledge demands resulting from: the activities along the care pathways; where cross-overs in care occur; and knowledge sharing for the integration of care. The findings also suggest that despite the theoretical awareness of KMS implementation methodologies, the actual execution of such systems requires practice and learning. Flexible, fluid approaches through rehearsal are important and communications strategies should focus heavily on transparency incorporating both structured and unstructured communication methods.

Re-engineering materials management: a case study on an Indian refinery

Materials management function is always a major concern to the management of any industrial organisation as high inventory and an inefficient procurement process affect the profitability to a great extent. Problems multiply due to a very current business environment in India. Hence, existing materials planning and procurement processes and inventory management systems require a re-look with respect to a changing business environment. This study shows a radical improvement in materials management function of an Indian petroleum refinery through business process re-engineering (BPR) by analysing current processes, identifying key issues, deriving paradigm shifts and developing re-engineered processes through customer value analysis. BPR has been carried out on existing processes of “materials planning and procurement” and “warehousing and surplus disposal”. The re-engineered processes for materials management function trigger a few improvement projects that were identified by the group of executives who took part in the re-engineering exercise. Those projects were implemented in an integrated framework with the application of the state of art information technology tools.