Addressing the project implementation challenges in the Saudi Arabian power supply industry: an investigative approach towards improving project delivery

For many decades, the Kingdom of Saudi Arabia has been widely known for being a reliable oil exporter. This fact, however, has not exempted it from facing significant domestic energy challenges. One of the most pressing of these challenges involves bridging the widening electricity supply-demand gap where, currently, the demand is growing at a very fast rate. One crucial means to address this challenge is through delivering power supply projects with maximum efficiency. Project delivery delay, however, is not uncommon in this highly capital-intensive industry, indicating electricity supplies are not coping with the demand increases. To provide a deeper insight into the challenges of project implementation and efficient practice, this research adopts a pragmatic approach by triangulating literature, questionnaires and semi-structured interviews. The research was conducted in the Saudi Arabian power supply industry – Western Operating Area. A total of 105 usable questionnaires were collected, and 28 recorded, semi-structured interviews were conducted, analysed and synthesised to produce a conceptual model of what constitutes the project implementation challenges in the investigated industry. This was achieved by conducting a comprehensive ranking analysis applied to all 58 identified and surveyed factors which, according to project practitioners in the investigated industry, contribute to project delay. 28 of these project delay factors were selected as the "most important" ones. Factor Analysis was employed to structure these 28 most important project delay factors into the following meaningful set of 7 project implementation challenges: Saudi Electricity Company's contractual commitments, Saudi Electricity Company's communication and coordination effectiveness, contractors' project planning and project control effectiveness, consultant-related aspects, manpower challenges and material uncertainties, Saudi Electricity Company's tendering system, and lack of project requirements clarity. The study has implications for industry policy in that it provides a coherent assessment of the key project stakeholders' central problems. From this analysis, pragmatic recommendations are proposed that, if enacted, will minimise the significance of the identified problems on future project outcomes, thus helping to ensure the electricity supply-demand gap is diminished.

Business process orientated holonic (PrOH) modeling

Purpose: The purpose of this paper is to describe how the application of systems thinking to designing, managing and improving business processes has resulted in a new and unique holonic-based process modeling methodology know as process orientated holonic modeling. Design/methodology/approach: The paper describes key systems thinking axioms that are built upon in an overview of the methodology; the techniques are described using an example taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. These were produced in an 18 month project, using an action research approach, to improve quality and process efficiency. Findings: The findings of this research show that this new methodology can support process depiction and improvement in industrial sectors which are characterized by environments of high variety and low volume (e.g. projects; such as the design and manufacture of a radar system or a hybrid production process) which do not provide repetitive learning opportunities. In such circumstances, the methodology has not only been able to deliver holonic-based process diagrams but also been able to transfer strategic vision from top management to middle and operational levels without being reductionistic. Originality/value: This paper will be of interest to organizational analysts looking at large complex projects whom require a methodology that does not confine them to thinking reductionistically in "task-breakdown" based approaches. The novel ideas in this paper have great impact on the way analysts should perceive organizational processes. Future research is applying the methodology in similar environments in other industries. © Emerald Group Publishing Limited.

Building a holarchy using business process-oriented holonic (PrOH) modeling

The application of systems thinking to designing, managing, and improving business processes has developed a new "holonic-based" process modeling methodology. The theoretical background and the methodology are described using examples taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. A key point of differentiation attributed to this methodology is that it allows a set of models to be produced without taking a task breakdown approach but instead uses systems thinking and a construct known as the "holon" to build process descriptions as a system of systems (i.e., a holarchy). The process-oriented holonic modeling methodology has been used for total quality management and business process engineering exercises in different industrial sectors and builds models that connect the strategic vision of a company to its operational processes. Exercises have been conducted in response to environmental pressures to make operations align with strategic thinking as well as becoming increasingly agile and efficient. This unique methodology is best applied in environments of high complexity, low volume, and high variety, where repeated learning opportunities are few and far between (e.g., large development projects). © 2007 IEEE.

FDI, trade and growth, a causal link?

. FDI, Trade and Growth, a Causal Link? (RP0710) Prof Nigel DRIFFIELD Dr Rakesh BISSOONDEEAL Mayang Pramadhani Non-technical Summary This paper explores the relationship between imports, exports, foreign direct investment and growth. For some time there has been a good deal of debate whether trade and foreign direct investment) FDI are substitutes and complements, with the existing literature generating some rather contradictory findings. We show, for Indonesia that inward FDI and both imports and exports are complementary, and further that FDI causes an increase in trade. This is of particular interest for a country such as Indonesia, that has attracted a high proportion of export-orientated inward investment. This, theoretically at least is associated with an increase in imports, in the form of capital goods and components, but a reduction in imports. We show that the previous literature that fails to find such a relationship does so because both trade and FDI are associated with growth, and previous work ignores these growth effects when seeking to isolate the relationship between trade and FDI.

Intra-industry foreign direct investment, uneven development and globalization:the legacy of Stephen Hymer

This paper revisits the issue of intra-industry foreign direct investment (FDI). This issue was considered in Stephen Hymer's early work, but was not subsequently developed, and was largely ignored in the literature for some time. Using the example of the UK, this paper traces the patterns of intra-industry FDI, both across countries and industries, for both the manufacturing and service sectors. Despite the undoubted increase in the integration of goods and factor markets since the time of Hymer's writing, the analysis presented here shows that the pattern has changed little in the last 40 years. The paper then goes on to discuss the motives for intra-industry FDI, relating it to technology flows and factor cost differentials. Finally, we present some analysis relating intra-industry FDI to uneven development, both between developed and developing countries, and between regions of a developed country. It is clear that intra-industry FDI is still very much a developed country phenomenon, as Hymer suggested, with both developing countries and poorer regions of developed countries unlikely to reap any of the benefits. In this context, one-way and two-way FDI must be seen as different phenomena within the debate on globalisation. © The Author 2005. Published by Oxford University Press on behalf of the Cambridge Political Economy Society. All rights reserved.

The comparative impact of privatisation and regulation on productivity growth in the English and Welsh water and sewerage industry, 1985-99

After the 10 regional water authorities of England and Wales were privatized in November 1989, the successor WASCs (water and sewerage companies) faced a new regulatory regime that was designed to promote productivity growth while simultaneously improving drinking water and environmental quality. As legally mandated quality improvements necessitated a costly capital investment programme, the industry's economic regulator – the Office of Water Services – implemented a RPI + K pricing system, designed to compensate the WASCs for their capital investment programme while also encouraging faster rates of productivity growth. This paper considers the relative effects of privatization and regulation on productivity growth in the industry using both non-parametric and parametric methods to provide a crosscheck on the robustness of the results. While there is evidence that labour productivity improved after privatization, there is no evidence that privatization led to a growth in TFP (total factor productivity). However, there is some evidence of a small increase in the rate of TFP growth in the aftermath of a substantial tightening of the regulatory regime that took place in 1995. These results, therefore, are consistent with evidence from other research that privatization, in the absence of effective competition and/or regulation, is not necessarily associated with improved economic performance.

The impact of foreign direct investment on labour productivity in the Chinese electronics industry

Foreign direct investment (FDI) may have a positive impact on labour productivity in recipient industries through direct introduction of capital, technology and management skills and indirectly through spillover effects on domestic firms. This study uses a model intended to examine the overall effects of inward FDI in the Chinese electronics industry. Official data are used for 41 sub-sectors of the industry in 1996 and 1997 having differing levels of FDI. Labour productivity is modelled as dependent on the degree of foreign presence in the industry and other variables, namely capital intensity, human capital and firm size for scale factors. The econometric results suggest that foreign presence in the industry is associated with higher labour productivity. © 2001 Elsevier Science Ltd.

Productivity change in the water industry in England and Wales:application of the meta-Malmquist Index

This paper uses a meta-Malmquist index for measuring productivity change of the water industry in England and Wales and compares this to the traditional Malmquist index. The meta-Malmquist index computes productivity change with reference to a meta-frontier, it is computationally simpler and it is circular. The analysis covers all 22 UK water companies in existence in 2007, using data over the period 1993–2007. We focus on operating expenditure in line with assessments in this field, which treat operating and capital expenditure as lacking substitutability. We find important improvements in productivity between 1993 and 2005, most of which were due to frontier shifts rather than catch up to the frontier by companies. After 2005, the productivity shows a declining trend. We further use the meta-Malmquist index to compare the productivities of companies at the same and at different points in time. This shows some interesting results relating to the productivity of each company relative to that of other companies over time, and also how the performance of each company relative to itself over 1993–2007 has evolved. The paper is grounded in the broad theory of methods for measuring productivity change, and more specifically on the use of circular Malmquist indices for that purpose. In this context, the contribution of the paper is methodological and applied. From the methodology perspective, the paper demonstrates the use of circular meta-Malmquist indices in a comparative context not only across companies but also within company across time. This type of within-company assessment using Malmquist indices has not been applied extensively and to the authors’ knowledge not to the UK water industry. From the application perspective, the paper throws light on the performance of UK water companies and assesses the potential impact of regulation on their performance. In this context, it updates the relevant literature using more recent data.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Marketing strategy and new product development in the UK credit card industry

The development of new products in today's marketing environment is generally accepted as a requirement for the continual growth and prosperity of organisations. The literature is consequently rich with information on the development of various aspects of good products. In the case of service industries, it can be argued that new service product development is of as least equal importance as it is to organisations that produce tangible goods products. Unlike the new goods product literature, the literature on service marketing practices, and in particular, new service product development, is relatively sparse. The main purpose of this thesis is to examine a number of aspects of new service product development practice with respect to financial services and specifically, credit card financial services. The empirical investigation utilises both a case study and a survey approach, to examine aspects of new service product development industry practice relating specifically to gaps and deficiencies in the literature with respect to the financial service industry. The findings of the empirical work are subsequently examined in the context in which they provide guidance and support for a new normative new service product development model. The study examines the UK credit card financial service product sector as an industry case study and perspective. The findings of the field work reveal that the new service product development process is still evolving, and that in the case of credit card financial services can be seen as a well-structured and well-documented process. New product development can also be seen as an incremental, complex, interactive and continuous process which has been applied in a variety of ways. A number of inferences are subsequently presented.

Organizational weaknesses of the Greek Manufacturing industry: a case study of footwear

This thesis is concerned with those factors influencing the present performance of Greek manufacturing industry and the ways in which improvements could be realized after Greece joins European Communities..Detailed examination is made of the Greek footwear industry and its problems as the country emerges from a semi developed state to a position approaching parity with Western European countries. Particular attention is paid to the technology employed, capital deployment, industrial structure and managerial performance. In order to illustrate the path of development of the Greek footwear industry a comparison is undertaken with the British footwear industry which has a longer history and has employed larger scale methods since the 19th century. This comparison illustrates the opportunities and pitfalls likely to face the Greek industry in coming years. One section of the thesis is also concerned with trading relationships between the U.K. and Greece and identifies the market opportunities available to Greek industrialists. A detailed analysis is undertaken of the available secondary sources of information particularly official statistical data relating to production, capital expenditure, imports and exports, employment and consumption. Use is also made of various surveys of trade and production in footwear undertaken by trade associations and other bodies. The field research study has been largely directed towards practicing managers in companies of various size and is concerned with exposing standards of management and of relating efficiency to organization structure. The thesis is also concerned with the many wide issues affecting the development of manufacturing industry in Greece including the influence of social structure and social institutions, the values of modern Greek society and the complex organizational problems which Greece needs to overcome in order to take its place amongst the more established states of Europe.

A political economy of the ethnic chinese catering industry

The present political climate in which the ideals of entrepreneurship and self-help are strongly encouraged has drawn attention to those ethnic minorities noted for their entrepreneurial activity. Since the Chinese appear to be an exemplary case in point, this thesis focusses upon the historical material conditions which have led to the formation of a Chinese 'business* community in Britain, both past and present As such, it rejects the theories of cultural determinism which characterise most studies of the Chinese. For rather than representing the endurance of cultural norms, the existence of the contemporary Chinese 'niche' of ethnically exclusive firms in the catering industry is due to the conjunction of a number of historical processes. The first is the imperialist expansion into China of Britain's capitalist empire during the nineteenth century which established a relationship of dependency upon the interests of British capital by colonial Chinese labour. The second is the post war development of the catering industry and its demand for cheap labour as administered by the British state together with the contemporaneous development of the agricultural economy of colonial Hong Kong. Far from representing a source of material benefit to all, the ethnic Chinese 'niche' in catering is highly exploitative and merely underlines the racial oppression of Chinese in Britain. Attempts to promote business interests within the ethnic community therefore serve merely to entrench the structures of oppression.

A comparison of U.S. and Japanese management systems and their transferability to Singapore industry

This research compares U.S. and Japanese management systems and evaluates their transferability to the Singaporean manufacturing industry. The objectives were:- a) To determine the effectiveness of U.S. and Japanese management systems when applied to Singapore. b) Determine the extent of transferability of U.S. and Japanese management systems to Singapore. c) Survey general problems ecountered in the application of U.S. and Japanese management systems to the Singapore industry. The study using questionnaire survey and interviews covered a total of eighty companies from four groups of firms in four industrial sectors comprising of U.S. and Japanese subsidiaries based in Singapore and their respective parent companies. Data from the questionnaires and interviews were used to investigate environmental conditions, management philosophy, management functions/practices, management effectiveness, and firm productivity. Two-way analysis of variance was used to analyse the questionnaire data. The analysis of the perceptual data from the questionnaire survey and interviews suggested that both U.S. and Japanese parent companies performed better in almost all the management variables studied when compared to their subsidiaries in Singapore. U.S. subsidiaries have less difficulty in adjusting to the Singapore environmental conditions and obtained better results than the Japanese subsidiaries in management functions/practices and management philosophy than the U.S. subsidiaries. In addition, the firm productivity (in terms of labour and capital productivity) of U.S. subsidiaries in Singapore was found to be higher than those of the Japanese subsidiaries. It was found that the Japanese parent companies returned the highest score among the four groups of firms in all the four industrial sectors for all the four management variables (i.e. environmental conditions, management philosophy, management functions/practices, and management effectiveness) surveyed using questionnaires. In contrast, the average score for Japanese subsidiaries in Singapore was generally the lowest among the four groups of firms. Thus the results of this study suggest that the transfer of U.S. management system into the Singapore industry is more successful than the Japanese management system. The problems encountered in the application of U.S. and Japanese management in Singapore were identified and discussed by the study. General recommendations for the Singaporean manufacturing industry were then made based on the findings of the questionnaire survey and interview analysis.

Minority enterprise in the clothing industry: an analysis of Asian jeans manufacturers in Birmingham

This thesis discusses and assesses the resources available to Asian entrepreneurs in the West Midlands' clothing industry and how they are used by these small businessmen in order to address opportunities in the market economy within the constraints imposed. The fashion industry is volatile and is dependent upon flexible firms which can respond quickly to shortrun production schedules. Small firms are best able to respond to this market environment. Production of jeans presents an interesting departure from the mainstream fashion industry. It is traditionally gared towards longrun production schedules where multinational enterprises have artificially diversified the market, promoting the 'right' brand name and have established control of the upper end of the market, whilst imports from Newly Developing Countries have catered for cheap copies at the lower end of the market. In recent years, a fashion element to jeans has emerged, thus opening a market gap for U.K. manufacturers to respond in the same way as for other fashion articles. A large immigrant population, previously serving the now declining factories and foundries of the West Midlands but, through redundancy, no longer a part of this employment sector, has ~5ponded to economic constraints and market opportunities by drawing on ethnic network resources for competitive access to labour, finance and contacts, to attack the emergent market gap. Two models of these Asian entrepreneurs are developed. One being somecne who has professionally and actively tackled the market gap and become established. These entrepreneurs are usually educated and have personal experience in business and were amongst the first to perceive opportunities to enter the industry, actively utilising their ethnicity as a resource upon which to draw for favorable access to cheap, flexible labour and capital. The second model is composed of later entrants to jeans manufacturing. They have less formal education and experience and have been pushed into self-employment by constraints of unemployment. Their ethnicity is passively used as a resource. They are more likely confined to the marginal activity of 'cut make and trim' and have little opportunity to increase profit margins, become estalished or expand.

Product design in the context of the social needs in less industrialised economies

This thesis is related to the subject of technical innovation, specifically to the activity of design in microenterprises operating in less industrialised economies. Design here is understood as a process, which is not the sole domain of formally trained categories such as engineers, architects or industrial designers. The 'professional boundary' discussion in this investigation is perceived as secondary as, in this context, products are designed, copied or adapted by workers, entrepreneurs themselves, or directly by the poor community. Design capacity at this level is considered to be important both in relation to the conception of capital and consumer goods and to the building up of technical knowledge. Although professional design emerged in Latin America little over three decades ago, this activity has remained marginalised throughout industry. Design activity tends to be concentrated in some product categories in the formalised industrial sector. For microenterprises operating informally, industrial design appears to be unknown. The existing literature pays little attention to 'informal design' capacity. Other areas of knowledge, such as development economies, recognise the importance of microenterprises and technological capability but neglect the potential role of industrial design in small manufacturing units. The management literature, though it focuses on technical innovation and design, has also paid little attention to 'informal design'. In less industrialised economies this neglect is felt by the lack of programmes specifically tailored to create or stimulate 'informal design'. There is a need for recognition of 'informal design' capacity and for the implementation of programmes which specifically target design as a central activity in the manufacturing firm, independent of their size and technological capability. Addressing 'design by the poor for the poor', requires a down-to-earth approach.