Fatigue crack initiation and propagation from defects in aluminium welds

Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of stress and strain ooncentrations. The former is preferable on the grounds of theoretical models of crack tip plasticity, although either may be used as the basis of an effeotive design criteria against crack initiation. Fatigue lives fol1owing initiation were found to follow predictions based on the integration of a Paris type power law. The effect of residual stresses from the welding operation on both initiation and propagation was accounted for by a Forman type equation. This incorporated the notional stress ratio produced by the residual stresses after various heat treatments. A fracture mechanics analysis was found to be useful in describing the fatigue behaviour of the weldments at increased temperatures up to 300°C. It is pointed out, however, that the complex interaction of residual stresses, frequency, and changes in fracture mode necessitate great caution in the application of any general design criteria against crack initiation and growth at elevated. temperatures.

Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiCp metal matrix composite

The effects of a thermal residual stress field on fatigue crack growth in a silicon carbide particle-reinforced aluminum alloy have been measured. Stress fields were introduced into plates of material by means of a quench from a solution heat-treatment temperature. Measurements using neutron diffraction have shown that this introduces an approximately parabolic stress field into the plates, varying from compressive at the surfaces to tensile in the center. Long fatigue cracks were grown in specimens cut from as-quenched plates and in specimens which were given a stress-relieving overaging heat treatment prior to testing. Crack closure levels for these cracks were determined as a function of the position of the crack tip in the residual stress field, and these are shown to differ between as-quenched and stress-relieved samples. By monitoring the compliance of the specimens during fatigue cycling, the degree to which the residual stresses close the crack has been evaluated. © 1995 The Minerals, Metals & Material Society.

Interrogation of a sonogashira cross-coupling of 8-bromoguanosine with phenylacetylene on amberlite:evidence for Pd/Cu ion binding and propagation of Pd/Cu nanoparticles

The reactivity of Amberlite (IRA-67) base "heterogeneous" resin in Sonogashira cross-coupling of 8-bromoguanosine 1 with phenylacetylene 3 to give 2 has been examined. Both 1 and 2 coordinate to Pd and Cu ions, which explains why at equivalent catalyst loadings, the homogeneous reaction employing triethylamine base is poor yielding. X-ray photo-electron spectroscopy (XPS) has been used to probe and quantify the active nitrogen base sites of the Amberlite resin, and postreaction Pd and Cu species. The Pd2Cl3(PPh)2 precatalyst and CuI cocatalyst degrade to give Amberlite-supported metal nanoparticles (average size ∼2.7 nm). The guanosine product 2 formed using the Amberlite Pd/Cu catalyst system is of higher purity than reactions using a homogeneous Pd precatalyst, a prerequisite for use in biological applications. Copyright © Taylor and Francis Group, LLC.

Transfer characteristics and propagation effects of a multi-resonance ring resonator-based optical device

We describe the linear and nonlinear optical transfer characteristics of a multi-resonance device consisting of two optical ring resonators coupled one to the other and to an optical waveguide. The propagation effects displayed by the device are compared with those of a sequence of fundamental ring resonators coupled to a waveguide.

Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels

Fatigue crack initiation and propagation in duplex stainless steels are strongly affected by microstructure in both inert and aggressive environments. Fatigue crack growth rates in wrought Zeron 100 duplex stainless steel in air were found to vary with orientation depending on the frequency of crack tip retardation at ferrite/austenite grain boundaries. Fatigue crack propagation rates in 3.5% NaCl solution and high purity water are increased by hydrogen assisted transgranular cyclic cleavage of the ferrite. The corrosion fatigue results are interpreted using a model for the cyclic cleavage mechanism.

Thermochemical characterisation of straws and high yielding perennial grasses

The research is concerned with thermochemical characterisation of straws and high yielding perennial grasses. Crops selected for this study include wheat straw (Triticum aestivum), rape straw (Brassica napus), reed canary grass (Phalaris arundinacea) and switch grass (Panicum virgatum). Thermogravimetric analysis (TGA) was used to examine the distribution of char and volatiles during pyrolysis up to 900 °C. Utilising multi-heating rate thermogravimetric data, the Friedman iso-conversional kinetic method was used to determine pyrolysis kinetic parameters. Light and medium volatile decomposition products were investigated using pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) up to 520 °C. The 22 highest yielding identifiable cellulose, hemicellulose and lignin biomass markers were semi-quantified taking into consideration peak areas from GC chromatograms. Notable differences can be seen in butanedioic acid, dimethyl ester (hemicelluloses decomposition products), 2-methoxy-4-vinylphenol (lignin marker) and levoglucosan (intermediate pyrolytic decomposition product of cellulose) content when comparing perennial grasses with straw. From results presented in this study, perennial grasses such as switch grass, have the most attractive properties for fast pyrolysis processing. This is because of the observed high volatile yield content of 82.23%, heating value of 19.64 MJ/kg and the relatively low inorganic content.

Outsourcing in Ireland:a literature review, survey and case study perspective

This paper investigates what is happening in Ireland at the moment regards outsourcing. It looks into the literature review and the survey conducted. The research took place over a period of two years, initially as a literature review, and then the survey was conducted through the mediums of e-mail and the postal service. The survey analysis found that Ireland was the most likely place for Irish companies to outsource to, and that nearly 40 percent of the companies that have been surveyed have started on their latest outsourcing initiative since 2004. This indicates that outsourcing is still important on the Island on Ireland, and is important management strategy in terms of SCM (supply chain management). It further shows that Irish companies have confidence in the fact that outsourcing can help their companys’ in some way. The purpose of the literature review and the survey was to come up with an outsourcing roadmap for companies that are considering outsourcing. It builds on what is already in the literature to provide what is felt a comprehensive guide for companies that outsource.

Neuropathology of the sporadic and variant subtypes of Creutzfeldt-Jakob disease:a comparative quantitative study

The objective of the present study was to compare quantitatively the neuropathology of two subtypes of Creutzfeldt-Jakob disease (CJD), viz., sporadic CJD (sCJD) and variant CJD (vCJD). The vacuolation (‘spongiform change’), surviving neurons, glial cell nuclei, and deposits of the disease form of prion protein (PrPsc) were quantified in histological sections of the cerebral cortex, hippocampus, and cerebellum in 11 cases of sCJD and 15 cases of vCJD. Three aspects of the quantitative pathology of each histological feature were studied: overall abundance (density or coverage), spatial distribution parallel to the tissue boundary, and laminar distribution across gyri of the cerebral cortex. Overall vacuole density was greater in sCJD than in vCJD in some regions while overall neuronal densities were greater in vCJD. In cerebral cortex, vacuoles and PrPsc deposits were distributed in clusters which exhibited a regular distribution parallel to the pia mater, this type of spatial pattern being more frequent in sCJD than in vCJD. In some cortical gyri there were differences in laminar distribution between subtypes, viz. the vacuolation was more generally distributed across cortical laminae in sCJD, neuronal loss was often greater in upper laminae in vCJD but in lower laminae in sCJD, and PrPsc deposits were more frequently distributed in upper laminae in vCJD but in lower laminae in sCJD. A significant gliosis affected lower cortical laminae in both sCJD and vCJD. Hence, there were differences in degeneration of cerebral cortex, hippocampus, and cerebellum in sCJD and vCJD, which may reflect variations in disease aetiology and propagation of PrPsc through the brain.

Comparative quantitative neuropathology of the sporadic and variant subtypes of Creutzfeldt-Jakob disease

The objective of the present study was to compare quantitatively the neuropathology of two subtypes of Creutzfeldt-Jakob disease (CJD), viz., sporadic CJD (sCJD) and variant CJD (vCJD). The vacuolation (‘spongiform change’), surviving neurons, glial cell nuclei, and deposits of the disease form of prion protein (PrPsc) were quantified in histological sections of the cerebral cortex, hippocampus, and cerebellum in 11 cases of sCJD and 15 cases of vCJD. Three aspects of the quantitative pathology of each histological feature were studied: overall abundance (density or coverage), spatial distribution parallel to the tissue boundary, and laminar distribution across gyri of the cerebral cortex. Overall vacuole density was greater in sCJD than in vCJD in some regions while overall neuronal densities were greater in vCJD. In cerebral cortex, vacuoles and PrPsc deposits were distributed in clusters which exhibited a regular distribution parallel to the pia mater, this type of spatial pattern being more frequent in sCJD than in vCJD. In some cortical gyri there were differences in laminar distribution between subtypes, viz. the vacuolation was more generally distributed across cortical laminae in sCJD, neuronal loss was often greater in upper laminae in vCJD but in lower laminae in sCJD, and PrPsc deposits were more frequently distributed in upper laminae in vCJD but in lower laminae in sCJD. A significant gliosis affected lower cortical laminae in both sCJD and vCJD. Hence, there were differences in degeneration of cerebral cortex, hippocampus, and cerebellum in sCJD and vCJD, which may reflect variations in disease aetiology and propagation of PrPsc through the brain.

Passive nonlinear pulse shaping in normally dispersive fiber systems

We propose a novel approach to characterize the parabolically-shaped pulses that can be generated from more conventional pulses via nonlinear propagation in cascaded sections of commercially available normally dispersive (ND) fibers. The impact of the initial pulse chirp on the passive pulse reshaping is examined. We furthermore demonstrate that the combination of pulse pre-chirping and propagation in a single ND fiber yields a simple, passive method for generating various temporal waveforms of practical interest.

Computerised control of cellular manufacturing systems

This thesis reviews the existing manufacturing control techniques and identifies their practical drawbacks when applied in a high variety, low and medium volume environment. It advocates that the significant drawbacks inherent in such systems, could impair their applications under such manufacturing environment. The key weaknesses identified in the system were: capacity insensitive nature of Material Requirements Planning (MRP); the centralised approach to planning and control applied in Manufacturing Resources Planning (MRP IT); the fact that Kanban can only be used in repetitive environments; Optimised Productivity Techniques's (OPT) inability to deal with transient bottlenecks, etc. On the other hand, cellular systems offer advantages in simplifying the control problems of manufacturing and the thesis reviews systems designed for cellular manufacturing including Distributed Manufacturing Resources Planning (DMRP) and Flexible Manufacturing System (FMS) controllers. It advocates that a newly developed cellular manufacturing control methodology, which is fully automatic, capacity sensitive and responsive, has the potential to resolve the core manufacturing control problems discussed above. It's development is envisaged within the framework of a DMRP environment, in which each cell is provided with its own MRP II system and decision making capability. It is a cellular based closed loop control system, which revolves on single level Bill-Of-Materials (BOM) structure and hence provides better linkage between shop level scheduling activities and relevant entries in the MPS. This provides a better prospect of undertaking rapid response to changes in the status of manufacturing resources and incoming enquiries. Moreover, it also permits automatic evaluation of capacity and due date constraints and hence facilitates the automation of MPS within such system. A prototype cellular manufacturing control model, was developed to demonstrate the underlying principles and operational logic of the cellular manufacturing control methodology, based on the above concept. This was shown to offer significant advantages from the prospective of operational planning and control. Results of relevant tests proved that the model is capable of producing reasonable due date and undertake automation of MPS. The overall performance of the model proved satisfactory and acceptable.

Structural studies on antifolate drugs

Single crystal X-ray structure determinations are reported for eleven compounds all of which are either biologically active or potentially biologically important. The compounds fall into two distinct classes:- 1. Substituted diaminopyrimidines 2. Substituted aminopyrimidinones The first class of compounds were all selected on the basis of their common diaminopyrimidine nucleus which has been demonstrated to be a vital requirement for antifolate activity. They may all be described as non-classical or small molecule lipophilic dihydrofolate reductase (DHFR) inhibitors, as opposed to the classical folate analogues, having the ability to cross the blood-brain barrier, enter cells via a rapid passive diffusion process, and achieve high intracellular concentrations. Thus they are an excellent choice in the search for crystallography in the solid state, providing geometrical and distance data not available from any other analytical techniques to date; supporting and enhancing data obtained in the lower resolution studies of protein crystallography. The biological importance of these compounds is discussed and an attempt is made to relate/predict their pharmacological activity to observed structural features in the crystalline environment. Special attention is focussed on hydrogen bonding, confirmational flexibility and hydrophobicity of substituents; each of which appear to make contributions to tight binding in the enzyme active site. Chapter 9 describes the use of data from the literature and the solid state modelling of an observed enzyme-substrate interaction in an attempt to define it more accurately in terms of its geometric flexibility. Of the second class, one compound (ABPP) is reported; studies in two different crystal forms. In demonstrating both antiviral and high interferon inducing activity it is possible that this compound could be useful against cancer and also viral infections.

Creep crack growth in cast steam turbine casing steels

The creep rupture properties of cast ½Cr½Mo¼V and 1Cr1Mo¼V alloy steel used in the manufacture of power station steam generating plant. have been investigated. The effects of constraint and geometry on the creep rupture properties are also considered. The validity of various criteria controlling macroscopic creep crack growth in cast CrMoV alloys has been examined. It is found that neither the stress intensity factor nor reference stress correlate satisfactorily the creep crack growth rates at the test temperature of 550°C. Certain minimum displacements must be achieved for crack initiation and propagation. It is found that this displacement as measured by crack opening displacement or crack aspect ratio, is the same in both compact tension and centre-cracked panel geometries, is invariant with crack length and decreases with increasing constraint. The effect of constraint on creep crack growth rate in the two geometries is less conclusive. A new model describing creep crack growth in cast CrMoV alloy steels has been developed. The model is based on the results from a numerical finite element creep analysis of the relaxation and redistribution of stress ahead of an incubating creep crack . It is found that macroscopic creep crack growth in a material undergoing either plane stress or plane strain deformation can be described by a fracture stress which is based on the Von Mises equivalent stress. It has been shown that this model is capable of rationalising all of the experimental crack velocity data from the cast CrMoV alloys. The resultant degree of data correlation is far superior to that obtained when using the stress intensity factor or reference stress. A cumulative damage creep fracture model based upon the results from the numerical analysis has been developed. It is found that the model is capable of predicting the behaviour of propagating creep cracks in cast CrMoV alloys from smooth bar creep rupture data.

Post-registration learning trends of community pharmacists

Background: Some Australian pharmacists use continuing education to maintain knowledge and acquire new information. There has been a progression from continuing education to continuing professional development (CPD) - a mandatory requirement for pharmacists in all jurisdictions of Australia. Aim: To identify post-registration learning trends of community pharmacists in Western Australia. Method: A questionnaire was developed and administered by face-to-face interviews with community pharmacists in metropolitan Perth. Pharmacists registered for less than 12 months and pharmacists working in hospitals were excluded. Results: 103 pharmacists were approached with a response rate of 95%. Journals (41%), reference books (23%) and the Internet (18%) were the most commonly used educational resources cited by pharmacists. Keeping scientific information up-to-date (39%) and gathering practical knowledge (22%) were the leading motivators for pharmacists to participate in continuing education. Factors that hindered participation in continuing education included lack of time (34%), family commitments (21%) and business commitments (21%). 79% of pharmacists agreed with the concept of mandatory CPD. 47% of pharmacists suggested that the primary sanction for not complying with mandatory CPD should be counselling to determine reasons for non-compliance. Conclusion: Community pharmacists preferred educational resources that were easily accessible at convenient times. Most pharmacists were able to fulfil the requirements of CPD, however, further educational support and promotion would ensure the successful uptake of CPD by community pharmacists in Western Australia.

All-optical nonlinear fibre signal processing

All-optical technologies for data processing and signal manipulation are expected to play a major role in future optical communications. Nonlinear phenomena occurring in optical fibre have many attractive features and great, but not yet fully exploited potential in optical signal processing. Here, we overview our recent results and advances in developing novel photonic techniques and approaches to all-optical processing based on fibre nonlinearities. Amongst other topics, we will discuss phase-preserving optical 2R regeneration, the possibility of using parabolic/flat-top pulses for optical signal processing and regeneration, and nonlinear optical pulse shaping. A method for passive nonlinear pulse shaping based on pulse pre-chirping and propagation in a normally dispersive fibre will be presented. The approach provides a simple way of generating various temporal waveforms of fundamental and practical interest. Particular emphasis will be given to the formation and characterization of pulses with a triangular intensity profile. A new technique of doubling/copying optical pulses in both the frequency and time domains using triangular-shaped pulses will be also introduced.