Bug-eyed; eye infections caused by bacteria

This article is a brief introduction to the eye infections most commonly caused by bacteria together with their treatment.

Magneto-vibratory separation of glass and bronze granular mixtures immersed in a paramagnetic liquid

A fluid-immersed granular mixture may spontaneously separate when subjected to vertical vibration, separation occurring when the ratio of particle inertia to fluid drag is sufficiently different between the component species of the mixture. Here, we describe how fluid-driven separation is influenced by magneto-Archimedes buoyancy, the additional buoyancy force experienced by a body immersed in a paramagnetic fluid when a strong inhomogeneous magnetic field is applied. In our experiments glass and bronze mixtures immersed in paramagnetic aqueous solutions of MnCl2 have been subjected to sinusoidal vertical vibration. In the absence of a magnetic field the separation is similar to that observed when the interstitial fluid is water. However, at modest applied magnetic fields, magneto-Archimedes buoyancy may balance the inertia/fluid-drag separation mechanism, or it may dominate the separation process. We identify the vibratory and magnetic conditions for four granular configurations, each having distinctive granular convection. Abrupt transitions between these states occur at well-defined values of the magnetic and vibrational parameters. In order to gain insight into the dynamics of the separation process we use computer simulations based on solutions of the Navier-Stokes' equations. The simulations reproduce the experimental results revealing the important role of convection and gap formation in the stability of the different states.

The role of oxidation in the protection of sliding metal surfaces

This study is concerned with the mechanisms of growth and wear of protective oxide films formed under various tribological conditions. In the study three different tribological systems are examined in each of which oxidational wear is the dominant equilibrium mode. These are an unlubricated steel on steel system sliding at low and elevated temperatures, a boundary lubricated aluminium bronze on steel system and an unlubricated reciprocating sliding 9% Cr steel system operated at elevated temperature, in an atmosphere of carbon dioxide. The results of mechanical measurements of wear and friction are presented for a range of conditions of load, speed and temper.ature for the systems, together with the results of extensive examinations of the surfaces and sub­ surfaces by various physical methods of analysis. The major part of the thesis, however, is devoted to the development and application of surface models and theoretical quantative expressions in order to explain the observed oxidational wear phenomena. In this work, the mechanisms of formation of load bearing ox ide plateaux are described and are found to be dependent on system geometry and environment. The relative importance of ''in contact" and "out of contact" oxidation is identified together with growth rate constants appropriate to the two situations. Hypotheses are presented to explain the mechanisms of removal of plateaux to form wear debris. The latter hypotheses include the effects of cyclic stressing and dislocation accumulation, together with effects associated with the kinetics of growth and physical properties of the various oxides. The proposed surf ace mode1s have led to the develop­ ment of quantitative expressions for contact temperature, unlubricated wear rates, boundary lubricated wear rates and the wear of rna ter ial during the transition from severe to mild wear. In general theoretical predictions from these expressions are in very good agreement with experimental values.

Wear of high aluminium zinc-based alloys in plain bearing applications

Two zinc-based alloys of high aluminium content, Super Cosmal alloy containing 60% Al, 6% Si, 1% Cu, 0.3% Mn and HAZCA alloy containing 60% Al, 8% Si, 2% Cu, 0.06% Mg were produced by sand casting. Foundry characteristics in particular, fluidity, mode of solidification and feeding ability were examined. Metallographic analysis of structures was carried out using optical and scanning electron microscopy and their mechanical properties were determined using standard techniques. Dry wear characteristics were determined using a pin-on-disc test, and boundary-lubricated wear was studied using full bearing tests. Results from casting experiments were evaluated and compared with the behaviour of a standard ZA-27 alloy and those from tribological tests with both ZA-27 alloy and a leaded tin-bronze (SAE660) under the same testing conditions. The presence of silicon was beneficial, reducing the temperature range of solidification, improving feeding efficiency and reducing gravity segregation of phases. Use of chills and melt degassing was found necessary to achieve soundness and enhanced mechanical properties. Dry wear tests were performed against a steel counterface for sliding speeds of 0.25, 0.5, 1.0 and 2 m/s and for a range of loads up to 15 kgf. The high aluminium alloys showed wear rates as low as those of ZA-27 at speeds of 0.25 and 0.5 m/s for the whole range of applied loads. ZA-27 performed better at higher speeds. The build up of a surface film on the wearing surface of the test pins was found to be responsible for the mild type of wear of the zinc based alloys. The constitution of the surface film was determined as a complex mixture of aluminium, zinc and iron oxides and metallic elements derived from both sliding materials. For full bearing tests, bushes were machined from sand cast bars and were tested against a steel shaft in the presence of a light spindle oil as the lubricant. Results showed that all zinc based alloys run-in more rapidly than bronze, and that wear in Super Cosmal and HAZCA alloys after prolonged running were similar to those in ZA-27 bearings and significantly smaller than those of the bronze.

[Review of] Ivo Mijnssen, The Quest for an Ideal Youth in Putin’s Russia I. Back to Our Future! History, Modernity and Patriotism According to Nashi, 2005–2012. Soviet and Post-Soviet Politics and Society, Stuttgart: Ibidem Verlag, 2012, 202pp., e 34.90 p/b

THE YOUTH MOVEMENT NASHI (OURS) WAS FOUNDED IN THE SPRING of 2005 against the backdrop of Ukraine’s ‘Orange Revolution’. Its aim was to stabilise Russia’s political system and take back the streets from opposition demonstrators. Personally loyal to Putin and taking its ideological orientation from Surkov’s concept of ‘sovereign democracy’, Nashi has sought to turn the tide on ‘defeatism’ and develop Russian youth into a patriotic new elite that ‘believes in the future of Russia’ (p. 15). Combining a wealth of empirical detail and the application of insights from discourse theory, Ivo Mijnssen analyses the organisation’s development between 2005 and 2012. His analysis focuses on three key moments—the organisation’s foundation, the apogee of its mobilisation around the Bronze Soldier dispute with Estonia, and the 2010 Seliger youth camp—to help understand Nashi’s organisation, purpose and ideational outlook as well as the limitations and challenges it faces. As such,the book is insightful both for those with an interest in post-Soviet Russian youth culture, and for scholars seeking a rounded understanding of the Kremlin’s initiatives to return a sense of identity and purpose to Russian national life.The first chapter, ‘Background and Context’, outlines the conceptual toolkit provided by Ernesto Laclau and Chantal Mouffe to help make sense of developments on the terrain of identity politics. In their terms, since the collapse of the Soviet Union, Russia has experienced acute dislocation of its identity. With the tangible loss of great power status, Russian realities have become unfixed from a discourse enabling national life to be constructed, albeit inherently contingently, as meaningful. The lack of a Gramscian hegemonic discourse to provide a unifying national idea was securitised as an existential threat demanding special measures. Accordingly, the identification of those who are ‘notUs’ has been a recurrent theme of Nashi’s discourse and activity. With the victory in World War II held up as a foundational moment, a constitutive other is found in the notion of ‘unusual fascists’. This notion includes not just neo-Nazis, but reflects a chain of equivalence that expands to include a range of perceived enemies of Putin’s consolidation project such as oligarchs and pro-Western liberals.The empirical background is provided by the second chapter, ‘Russia’s Youth, the Orange Revolution, and Nashi’, which traces the emergence of Nashi amid the climate of political instability of 2004 and 2005. A particularly note-worthy aspect of Mijnssen’s work is the inclusion of citations from his interviews with Nashicommissars; the youth movement’s cadres. Although relatively few in number, such insider conversations provide insight into the ethos of Nashi’s organisation and the outlook of those who have pledged their involvement. Besides the discussion of Nashi’s manifesto, the reader thus gains insight into the motivations of some participants and behind-the-scenes details of Nashi’s activities in response to the perceived threat of anti-government protests. The third chapter, ‘Nashi’s Bronze Soldier’, charts Nashi’s role in elevating the removal of a World War II monument from downtown Tallinn into an international dispute over the interpretation of history. The events subsequent to this securitisation of memory are charted in detail, concluding that Nashi’s activities were ultimately unsuccessful as their demands received little official support.The fourth chapter, ‘Seliger: The Foundry of Modernisation’, presents a distinctive feature of Mijnssen’s study, namely his ethnographic account as a participant observer in the Youth International Forum at Seliger. In the early years of the camp (2005–2007), Russian participants received extensive training, including master classes in ‘methods of forestalling mass unrest’ (p. 131), and the camp served to foster a sense of group identity and purpose among activists. After 2009 the event was no longer officially run as a Nashi camp, and its role became that of a forum for the exchange of ideas about innovation, although camp spirit remained a central feature. In 2010 the camp welcomed international attendees for the first time. As one of about 700 international participants in that year the author provides a fascinating account based on fieldwork diaries.Despite the polemical nature of the topic, Mijnssen’s analysis remains even-handed, exemplified in his balanced assessment of the Seliger experience. While he details the frustrations and disappointments of the international participants with regard to the unaccustomed strict camp discipline, organisational and communication failures, and the controlled format of many discussions,he does not neglect to note the camp’s successes in generating a gratifying collective dynamic between the participants, even among the international attendees who spent only a week there.In addition to the useful bibliography, the book is back-ended by two appendices, which provide the reader with important Russian-language primary source materials. The first is Nashi’s ‘Unusual Fascism’ (Neobyknovennyi fashizm) brochure, and the second is the booklet entitled ‘Some Uncomfortable Questions to the Russian Authorities’ (Neskol’ko neudobnykh voprosov rossiiskoivlasti) which was provided to the Seliger 2010 instructors to guide them in responding to probing questions from foreign participants. Given that these are not readily publicly available even now, they constitute a useful resource from the historical perspective.