The study and characterisation of water-based latices used for can coating interiors

Water-based latices, used in the production of internal liners for beer/beverage cans, were investigated using a number of analytical techniques. The epoxy-graft-acrylic polymers, used to prepare the latices, and films, produced from those latices, were also examined. It was confirmed that acrylic polymer preferentially grafts onto higher molecular weight portions of the epoxy polymer. The amount of epoxy remaining ungrafted was determined to be 80%. This figure is higher than was previously thought. Molecular weight distribution studies were carried out on the epoxy and epoxy-g-acrylic resins. A quantitative method for determining copolymer composition using GPC was evaluated. The GPC method was also used to determine polymer composition as a function of molecular weight. IR spectroscopy was used to determine the total level of acrylic modification of the polymers and NMR was used to determine the level of grafting. Particle size determinations were carried out using transmission electron microscopy and dynamic light scattering. Levels of stabilising amine greatly affected the viscosity of the latex, particle size and amount of soluble polymer but the core particle size, as determined using TEM, was unaffected. NMR spectra of the latices produced spectra only from solvents and amine modifiers. Using solid-state CP/MAS/freezing techniques spectra from the epoxy component could be observed. FT-IR spectra of the latices were obtained after special subtraction of water. The only difference between the spectra of the latices and those of the dry film were due to the presence of the solvents in the former. A distinctive morphology in the films produced from the latices was observed. This suggested that the micelle structure of the latex survives the film forming process. If insufficient acrylic is present, large epoxy domains are produced which gives rise to poor film characteristics. Casting the polymers from organic solutions failed to produce similar morphology.

The study and measurements of the behaviour and characteristics of electromagnetic relays

The thesis presents a theoretical and practical study of the dynamic behaviour of electromagnetic relays. After discussing the problem of solving the dynamicc equations analytically and presenting a historical survey of the earlier works in the relay and its dynamics, the simulation of a relay on the analogue computer is discussed. It is shown that the simulation may be used to obtain specific solutions to the dynamic equations. The computer analysis provides the dynamic characteristics for design purposes and may be used in the study of bouncing, rebound oscillations and stability of the armature motion. An approximate analytical solution to the two dynamic equations is given based on the assumption that the dynamic variation of the pull with the position of the armature is linear. The assumption is supported by the Computer-aided analysis and experimental results. The solution is intended to provide a basis for a rational design. A rigorous method of analysing the dynamic performance by using Ahlberg's theory is also presented. This method may be justified to be the extension of Ahlberg's theory by taking the mass and frictional damping forces into account. While calculating the armature motion mathematically, Ahlberg considers the equilibrium of two kinds of forces, namely pull and load, and disregards the mass and friction forces, whereas the present method deals with the equilibrium of all four kinds of forces. It is shown how this can be utilised to calculate the dynamic characteristics for a specific design. The utility of this method also extends to the study of stability, contact bounce and armature rebound. The magnetic circuit and other related topics which are essential to the study of relay dynamics are discussed and some necessary experimental results are given.

Lack of association between glucocorticoid use and presence of the metabolic syndrome in patients with rheumatoid arthritis:a cross-sectional study

Introduction - Rheumatoid arthritis (RA) associates with excessive cardiovascular morbidity and mortality, attributed to both traditional and novel cardiovascular risk factors. The metabolic syndrome, a cluster of classical cardiovascular risk factors, including hypertension, obesity, glucose intolerance, and dyslipidaemia, is highly prevalent in RA. Reports suggest that long-term glucocorticoid (GC) use may exacerbate individual cardiovascular risk factors, but there have been no studies in RA to assess whether it associates with the metabolic syndrome. We examined whether GC exposure associates with the presence of metabolic syndrome in patients with RA. Methods - RA patients (n = 398) with detailed clinical and laboratory assessments were categorised into three groups according to GC exposure: no/limited (<3 months) exposure (NE), low-dose (<7.5 mg/day) long-term exposure (LE), and medium-dose (greater than or equal to 7.5 mg to 30 mg/day) long-term exposure (ME). The metabolic syndrome was defined using the National Cholesterol Education Programme III guidelines. The association of GC exposure with the metabolic syndrome was evaluated using binary logistic regression. Results - The metabolic syndrome was present in 40.1% of this population and its prevalence did not differ significantly between the GC exposure groups (NE 37.9% versus LE 40.7% versus ME 50%, P = 0.241). Binary logistic regression did not demonstrate any increased odds for the metabolic syndrome when comparing ME with LE (odds ratio = 1.64, 95% confidence interval 0.92 to 2.92, P = 0.094) and remained non significant after adjusting for multiple potential confounders. Conclusions - Long-term GC exposure does not appear to associate with a higher prevalence of the metabolic syndrome in patients with RA. The components of the metabolic syndrome may already be extensively modified by other processes in RA (including chronic inflammation and treatments other than GCs), leaving little scope for additive effects of GCs.

Illness perceptions, beliefs and prevention of Type 2 Diabetes among British Pakistani mothers and young British Pakistani women

The prevalence rates of type2 diabetes mellitus (T2DM) continues to rise among British Pakistanis. The aim of this project was to explore T2DM perceptions and any preventative intentions among British Pakistani women and to discover whether they are doing anything to prevent the onset in themselves and their families. Initially a systematic review was conducted to investigate 20 existing prevention interventions and to assess their effectiveness (n=12,419). Mixed methods approach was adopted and three studies were conducted. The first study consisted of two focus groups with T2DM mothers (n=8) and three focus groups with non-T2DM mothers (n=17). The second study consisted of four focus groups young British Pakistani females (n=11). All focus groups were transcribed verbatim and analysed using thematic analysis. Following these a quantitative study was undertaken comprising of a questionnaire survey; 12 prevention-perception items (derived from the qualitative data) and the Illness-Perception Questionnaire Revised (IPQ-R) using participants from the same populations: T2DM mothers (n=41), non-T2DM mother (n=47) and young women (n=42). Results were analysed using multiple/hierarchical regression. The systematic review highlighted that the most effective prevention programmes focussed on behaviour and lifestyle with a combination of support and education to participants. The research studies demonstrated that T2DM was seen as an older person’s disease to be dealt with if/when it happens. T2DM mothers demonstrated knowledge and prevention understanding. There were non-significant relationships between prevention perceptions and T2DM illness perceptions across all three groups. The finding of this thesis emphasised that lifestyle interventions are crucial to aiding T2DM preventions as a good healthy diet and regular physical activity are the key components to T2DM prevention, and the importance of personal experience in perceived severity and lay-beliefs regarding T2DM and on family/cultural influences in British-Pakistanis. The findings of this project can be used to design culturally specific interventions towards preventing T2DM in the British Pakistani community.

Comparing German and British political culture through values : and analysis of the values of health care reform

This research sets out to compare the values in British and German political discourse, especially the discourse of social policy, and to analyse their relationship to political culture through an analysis of the values of health care reform. The work proceeds from the hypothesis that the known differences in political culture between the two countries will be reflected in the values of political discourse, and takes a comparison of two major recent legislative debates on health care reform as a case study. The starting point in the first chapter is a brief comparative survey of the post-war political cultures of the two countries, including a brief account of the historical background to their development and an overview of explanatory theoretical models. From this are developed the expected contrasts in values in accordance with the hypothesis. The second chapter explains the basis for selecting the corpus texts and the contextual information which needs to be recorded to make a comparative analysis, including the context and content of the reform proposals which comprise the case study. It examines any contextual factors which may need to be taken into account in the analysis. The third and fourth chapters explain the analytical method, which is centred on the use of definition-based taxonomies of value items and value appeal methods to identify, on a sentence-by-sentence basis, the value items in the corpus texts and the methods used to make appeals to those value items. The third chapter is concerned with the classification and analysis of values, the fourth with the classification and analysis of value appeal methods. The fifth chapter will present and explain the results of the analysis, and the sixth will summarize the conclusions and make suggestions for further research.

The role and relevance of non-government aid:a case study of Kenya

How effective are non-government organisations (NG0s) in their response to Third World poverty? That is the question which this thesis examines. The thesis begins with an overview of the problems facing Third World communities, and notes the way in which people in Britain have responded through NG0s. A second part of the thesis sets out the issues on which the analysis of NGOs has been made. These are: - the ways in which NGOs analyse the process of development; - the use of 'improving nutrition' and 'promoting self-reliance' as special objectives by NG0s; and - the nature of rural change, and the implications for NGOs as agents of rural development. Kenya is taken as a case study. Firstly the political and economic structure of the country is studied, and the natures of development, nutritional problems and self-reliance in the Kenyan context are noted. The study then focusses attention onto Kitui District, an area of Kenya which at the time of the study was suffering from drought. However, it is argued that the problems of Kitui District and the constraints to change there are as much a consequence of Kenya's structural underdevelopment as of reduced rainfall. Against this background the programmes of some British NGOs in the country are examined, and it is concluded that much of their work has little relevance to the principal problems which have been identified. A final part of the thesis takes a wider look at the policies and practices of NG0s. Issues such as the choice of countries in which NGOs work, how they are represented overseas, and their educational role in Britain are considered. It is concluded that while all NGOs have a concern for the conditions in which the poorest communities of the Third World live, many NGOs take a quite narrow view of development problems, giving only little recognition to the international and intranational political and economic systems which contribute to Third World poverty.

The formation and impact of hazard control policy:a study of the regulation of white lead paint in Britain

Government regulation of industrial hazards is examined in the context of the economic and technical processes of industrial development. Technical problems and costs of control are considered as factors in both the formation and impact of regulation. This thesis focuses on an historical case-study of the regulation of the hazard to painting workers from the use of lead pigments in paint. A regulatory strategy based on the prohibition of lead paints gained initial acceptance within the British state in 1911, but was subsequently rejected in favour of a strategy that allowed continued use of lead paint subject to hygiene precautions. The development of paint technology and its determinants, including concern about health hazards, are analysed, focusing on the innovation and diffusion into the paint industry of the major white pigments: white lead (PbC03 .PB(OH)2)and its substitutes. The process of regulatory development is examined, and the protracted and polarised regulatory d~bate contrasted to the prevailing 'consensual' methods of workplace regulation. The rejection of prohibition is analysed in terms of the different political and technical resources of those groups in conflict over this policy. This highlights the problems of consensus formation around such a strategy, and demonstrates certain constraints on state regulatory activity, particularly regarding industrial development. Member-states of the International Labour Organisation agreed to introduce partial prohibition of lead paint in 1921. Whether this was implemented is related to the economic importance of lead and non-lead metal and pigment industries to a nation. An analysis is made of the control of lead poisoning. The rate of control is related to the economic and technological trajectory of the regulated industry. Technical and organisational characteristics are considered as well as regulatory factors which range from voluntary compliance and informal pressures to direct legal requirements. The implications of this case-study for the analysis of the development and impacts of regulation are assessed.

A quantitative study of the pathological lesions in the neocortex and hippocampus of twelve patients with corticobasal degeneration

The density of ballooned neurons (BN), tau-positive neurons with inclusion bodies (tau+ neurons), and tau-positive plaques (tau+ plaques) was determined in sections of the frontal, parietal, and temporal lobe in 12 patients with corticobasal degeneration (CBD). No significant differences in the mean density of BN and tau+ neurons were observed between neocortical regions. In the hippocampus, the densities of BN were significantly lower than in the neocortex, and densities of tau+ neurons were greater in sectors CA1 and CA2, compared with CA3 and CA4. Tau+ plaques were present in one or more brain regions in six patients. Significantly more BN were recorded in the lower (laminae V/VI) compared with the upper cortex (laminae I/II/III) but tau+ neurons were equally frequent in the upper and lower cortex. No significant correlations were observed between the densities of BN and tau+ neurons, but the densities of BN in the superior temporal gyrus and tau+ plaques in the frontal cortex were positively correlated with age. A principal components analysis (PCA) suggested that differences in the density of tau+ neurons in the frontal and motor cortex were the most important sources of variation between patients. In addition, one patient with a particularly high density of tau+ neurons in the hippocampus appeared to be atypical of the patient group studied. The data support the hypothesis that, although clinically heterogeneous, CBD is a pathologically distinct disorder. (C) 2000 Academic Press.

The precursors and impacts of BSR on AMT acquisition and implementation

This paper reports on the results of research into the connections between transaction attributes and buyer-supplier relationships (BSRs) in advanced manufacturing technology (AMT) acquisition and implementation. The investigation began by examining the impact of the different patterns of BSR on the performance of the AMT acquisition. In understanding the phenomena, the study drew upon and integrated the literature of transaction cost economics theory, BSRs, and AMT, and used this as the basis for a theoretical framework and hypotheses development. This framework was then empirically tested using data that were gathered through a questionnaire survey with 147 companies and analyzed using a structural equation modeling technique. The results of the analysis indicated that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a stronger relationship with technology suppliers. However, the complexity of the technology being implemented was associated with BSR only indirectly through its association with the level of uncertainty (which has a direct impact upon BSR). The analysis also provided strong support for the premise that developing strong BSR could lead to an improved performance in acquiring and implementing AMT. The implications of the study are offered for both the academic and practitioner audience.

The finance of biotechnology:investment in new biotechnology firms by British venture capitalists-attitudes to, and evaluation of, business proposals

A notable feature of the recent commercialisation of biotechnology has been the success of 200 or so new firms, established in America since 1976, in exploiting specialised market niches. A key factor in their formation has been the ready availability of venture capital funding. These firms have been instrumental in establishing America's lead in exploiting biotechnology. It is this example which Britain has attempted to emulate as part of its strategy for developing its own biotechnology capabilities. This thesis investigated some aspects of the relationship between biotechnology and venture capital, concentrating on the determinants of the venture capitalist's investment decision. Following an extensive literature survey, two hypothetical business proposals were used to find what venture capitalists themselves consider to be the key elements of this decision. It was found that venture capitalists invest in people, not products, and businesses, not industries. It was concluded that venture capital-backed small firms should, therefore, be seen as an adjunct to the development of biotechnology in Britain, rather than as a substitute for a co-ordinated, co-operative strategy involving Government, the financial institutions, industry and academia. This is chiefly because the small size of the UK's domestic market means that many potentially important innovations in biotechnology may continue to be lost, since the short term identification of market opportunities for biotechnology products will dictate that they are insupportable in Britain alone. In addition, the data analysis highlighted some interesting methodological issues concerning the investigation of investment decision making. These related especially to shortcomings in the use of scoresheets and questionnaires in research in this area. The conclusion here was that future research should concentrate on the reasons why an individual reaches an investment decision. It is argued that only in this way can the nature of the evaluation procedures employed by venture capitalists be properly understood.

The source, cost and prevention of central venous catheter-related infection

Central venous catheters have become an integral part of patient management however they are associated with many complications including infection. Despite efforts being made to reduce the incidence of such infect ions the problem continues to increase and has resource implications for the Health Service. Studies relating to the source of microorganisms causing CVC-associated infection, the cost of such infections and the efficacy of an antimicrobial catheter have been undertaken. Thirty patients who required a CVC as part of their medical management and underwent cardiac surgery had the distal tips of their catheters sampled whilst in situ. Sampling took place within 1 h of catheter placement. Bacteria were isolated from 16% of the catheter distal tips sampled in situ. The guidewires used to insert the devices were also contaminated (50%). When CVC were inserted via a protective sheath, avoiding contact with the skin. the incidence of microbial contamination was reduced. These findings suggest that despite rigorous skin disinfection and strict aseptic technique, viable microorganisms are impacted onto the distal tip of CVC during the insertion procedure. Needleless intravascular access devices have been introduced in order to reduce the incidence of need1estick injury. However, it was unclear whether such connectors would act as a portal of entry for microorganisms to CVC. The efficacy of these devices was investigated. Within the controlled laboratory environment it was demonstrated that needleless devices, when challenged with microorganisms, did not allow the passage of microbes when flu id was injected. This therefore suggested that the devices should not increase the risk of catheter colonisation. When used in clinical practice however microbial contamination of the needleless connectors was 55 % in comparison to the routinely used luer connectors (23%). The cost of infections associated with CVC was determined. Twenty patients catheterised with a CVC designed for long term use who were admitted to hospital with a presumptive diagnosis of catheter-related infection were studied. The treatment given specifically for this infection was costed. The mean cost of such an infection was £ 1781.81. Throughout the UK this may amount to £1.565.906 per annum. The cost of infections associated with CVC designed for short term use was estimated to be between 5 and 7 million pounds per annum in the UK. In an attempt to reduce both the incidence and cost of catheter- related infection antimicrobial CVC have been developed. The efficacy of a novel polyurethane CVC impregnated on both the internal and external catheter surface with the quaternary ammonium compound benzalkonium chloride was investigated. Eighty eight patients received an antimicrobial catheter and 78 patients a conventional polyurethane CVC. The anti-microbial CVC resulted in a reduction in microbial colonisation of the external and internal polymer surfaces as compared to the control device. The observed reduction in microbial colonisation with the anti-microbial CVC may decrease the likelihood of subsequent infection offering a useful approach to the prevention of catheter-related infections.

The preparation of carbon fibres: a study of the physics and chemistry of the preparation of carbon fibres from acrylic precursors

High strength, high modulus carbon fibres are becoming increasingly important as high performance engineering materials. This thesis describes how they may be prepared by heat treatment from filaments spun from polyacrylonitrile and its copolymers. The chemistry of the first stages of heat treatment is very important in controlling the mechanical properties of the carbonised product. A cyclisation reaction has been found to be responsible for the relatively high thermal stability of pyrolysed polyacrylonitrile, but without oxidation the fibres degrade and fuse. An initial oxidation stage is, therefore, essential to the preparation of fibre of high orientation. The cyclised product of pyrolysis is probably a poly 1,4 dihydropiridine and oxidation converts this to aromatic structures, and cyclised structures containing carbonyl and other oxygenated groups. Oxidation is found to assist the carbon fibre preparation process, by producing a product which condenses at an earlier stage of heat treatment, before fusion can occur. Carbon fibre strength and modulus are dependent upon producing a highly oriented crystal structure. While oxidation of the polymer stabilises the fibre so as to prevent disorientation, further large increases in orientation, with a commensurate improvement in strength and modulus, can be obtained by stretching at temperatures above 1,700 °C. This process is analogous to the way fibre orientation is increased by the stretching of the precursor. A lamellar graphite structure can be created in high temperature fibre, by carefully controlling the degree of oxidation. This type of graphite can produce very high values of Young's modulus. More often, however, graphite fibre has a fibrillar fine structure, which is explicable in terms of continuous graphite ribbons. A ribbon model is the most satisfactory representation of the structure of carbon fibre, as it explains the mechanism of the development of long range order and the variation of Young's modulus with crystalline preferred orientation.