An investigation into vibration criteria for rotating machinery

Concern had been expressed by engineers of the Shell Chemical Company regarding the validity of existing vibration criteria for rotating machinery. A survey showed that existing criteria were based solely on the amplitude of vibration, normally of the bearing housings, with no allowance being made for the dynamic properties of the support1ng structure. The feasibility of measuring the mechanical impedance of bearing supports in order to assess the severity of vibration generated by a machine has been investigated. It is suggested that in many cases the oscillatory bearing force levels obtained for these measurements will provide a quantitative indication of severity. Theoretical and experimental work has been conducted on a model rig, comprising a flexible shaft running in journal bearings housed in flexible, asymmetric supports. The accuracy with which the system behaviour could be predicted using measured support impedances is discussed together with the extraction of uncoupled support impedances from measurements on the complete rotating system. Access was available to several industrial centrifugal compressors. To enable the bearing support impedances of these machines to be measured on site considerable attention has been paid to the evolution of a technique involving the use of transient excitation. To develop this technique the model rig and a large rotary converter have been used as test structures. Methods have also been devised and developed for the analysis of the transient impedance data.

The development of chemical exposure limits for the workplace

The thesis examines and explains the development of occupational exposure limits (OELs) as a means of preventing work related disease and ill health. The research focuses on the USA and UK and sets the work within a certain historical and social context. A subsidiary aim of the thesis is to identify any short comings in OELs and the methods by which they are set and suggest alternatives. The research framework uses Thomas Kuhn's idea of science progressing by means of paradigms which he describes at one point, `lq ... universally recognised scientific achievements that for a time provide model problems and solutions to a community of practitioners. KUHN (1970). Once learned individuals in the community, `lq ... are committed to the same rules and standards for scientific practice. Ibid. Kuhn's ideas are adapted by combining them with a view of industrial hygiene as an applied science-based profession having many of the qualities of non-scientific professions. The great advantage of this approach to OELs is that it keeps the analysis grounded in the behaviour and priorities of the groups which have forged, propounded, used, benefited from, and defended, them. The development and use of OELs on a larger scale is shown to be connected to the growth of a new profession in the USA; industrial hygiene, with the assistance of another new profession; industrial toxicology. The origins of these professions, particularly industrial hygiene, are traced. By examining the growth of the professions and the writings of key individuals it is possible to show how technical, economic and social factors became embedded in the OEL paradigm which industrial hygienists and toxicologists forged. The origin, mission and needs of these professions and their clients made such influences almost inevitable. The use of the OEL paradigm in practice is examined by an analysis of the process of the American Conference of Governmental Industrial Hygienists, Threshold Limit Value (ACGIH, TLV) Committee via the Minutes from 1962-1984. A similar approach is taken with the development of OELs in the UK. Although the form and definition of TLVs has encouraged the belief that they are health-based OELs the conclusion is that they, and most other OELs, are, and always have been, reasonably practicable limits: the degree of risk posed by a substance is weighed against the feasibility and cost of controlling exposure to that substance. The confusion over the status of TLVs and other OELs is seen to be a confusion at the heart of the OEL paradigm and the historical perspective explains why this should be. The paradigm has prevented the creation of truly health-based and, conversely, truly reasonably practicable OELs. In the final part of the thesis the analysis of the development of OELs is set in a contemporary context and a proposal for a two-stage, two-committee procedure for producing sets of OELs is put forward. This approach is set within an alternative OEL paradigm. The advantages, benefits and likely obstacles to these proposals are discussed.

Design of a stock control methodology for use within an oil blending company

The thesis deals with the background, development and description of a mathematical stock control methodology for use within an oil and chemical blending company, where demand and replenishment lead-times are generally non-stationary. The stock control model proper relies on, as input, adaptive forecasts of demand determined for an economical forecast/replenishment period precalculated on an individual stock-item basis. The control procedure is principally that of the continuous review, reorder level type, where the reorder level and reorder quantity 'float', that is, each changes in accordance with changes in demand. Two versions of the Methodology are presented; a cost minimisation version and a service level version. Realising the importance of demand forecasts, four recognised variations of the Trigg and Leach adaptive forecasting routine are examined. A fifth variation, developed, is proposed as part of the stock control methodology. The results of testing the cost minimisation version of the Methodology with historical data, by means of a computerised simulation, are presented together with a description of the simulation used. The performance of the Methodology is in addition compared favourably to a rule-of-thumb approach considered by the Company as an interim solution for reducing stack levels. The contribution of the work to the field of scientific stock control is felt to be significant for the following reasons:- (I) The Methodology is designed specifically for use with non-stationary demand and for this reason alone appears to be unique. (2) The Methodology is unique in its approach and the cost-minimisation version is shown to work successfully with the demand data presented. (3) The Methodology and the thesis as a whole fill an important gap between complex mathematical stock control theory and practical application. A brief description of a computerised order processing/stock monitoring system, designed and implemented as a pre-requisite for the Methodology's practical operation, is presented as an appendix.

Automation, rationalisation and concentration : a case study in the British chemical industry

This thesis is based upon a case study of the adoption of digital, electronic, microprocessor-based control systems by Albright & Wilson Limited - a UK chemical producer. It offers an explanation of the company's changing technology policy between 1978 and 1981, by examining its past development, internal features and industrial environment. Part One of the thesis gives an industry-level analysis which relates the development of process control technology to changes in the economic requirements of production . The rapid diffusion of microcomputers and other microelectronic equipment in the chemical industry is found to be a response to general need to raise the efficiency of all processes, imposed by the economic recession following 1973. Part Two examines the impaot of these technical and eoonomic ohanges upon Albright & Wilson Limited. The company's slowness in adopting new control technology is explained by its long history in which trends are identified whlich produced theconservatism of the 1970s. By contrast, a study of Tenneco Incorporated, a much more successful adoptor of automating technology, is offered with an analysis of the new technology policy of adoption of such equipment which it imposed upon Albright & Wilson, following the latter's takeover by Tenneco in 1978. Some indications of the consequences by this new policy of widespread adoptions of microprocessor-based control equipment are derived from a study of the first Albright & Wilson plant to use such equipment. The thesis concludes that companies which fail to adopt rapidly the new control technology may not survive in the recessionary environment, the long- established British companies may lack the flexibility to make such necessary changes and that multi-national companies may have an important role jn the planned transfer and adoption of new production technology through their subsidiaries in the UK.