The valuation of travel time savings in least developed countries:theoretical and empirical challenges and results from a field study

In developed countries travel time savings can account for as much as 80% of the overall benefits arising from transport infrastructure and service improvements. In developing countries they are generally ignored in transport project appraisals, notwithstanding their importance. One of the reasons for ignoring these benefits in the developing countries is that there is insufficient empirical evidence to support the conventional models for valuing travel time where work patterns, particularly of the poor, are diverse and it is difficult to distinguish between work and non-work activities. The exclusion of time saving benefits may lead to a bias against investment decisions that benefit the poor and understate the poverty reduction potential of transport investments in Least Developed Countries (LDCs). This is because the poor undertake most travel and transport by walking and headloading on local roads, tracks and paths and improvements of local infrastructure and services bring large time saving benefits for them through modal shifts. The paper reports on an empirical study to develop a methodology for valuing rural travel time savings in the LDCs. Apart from identifying the theoretical and empirical issues in valuing travel time savings in the LDCs, the paper presents and discusses the results of an analysis of data from Bangladesh. Some of the study findings challenge the conventional wisdom concerning the time saving values. The Bangladesh study suggests that the western concept of dividing travel time savings into working and non-working time savings is broadly valid in the developing country context. The study validates the use of preference methods in valuing non-working time saving values. However, stated preference (SP) method is more appropriate than revealed preference (RP) method.

The acceptability of alcohol fuels for automobile engines

The aim of this project was to carry out an investigastion into suitable alternatives to gasoline for use in modern automobiles. The fuel would provide the western world with a means of extending the natural gasoline resources and the third world a way of cutting down their dependence on the oil producing countries for their energy supply. Alcohols, namely methanol and ethanol, provide this solution. They can be used as gasoline extenders or as fuels on their own.In order to fulfil the aims of the project a literature study was carried out to investigate methods and costs of producing these fuels. An experimental programme was then set up in which the performance of the alcohols was studied on a conventional engine. The engine used for this purpose was the Fiat 127 930cc four cylinder engine. This engine was used because of its popularity in the European countries. The Weber fixed jet carburettor, since it was designed to be used with gasoline, was adapted so that the alcohol fuels and the blends could be used in the most efficient way. This was mainly to take account of the lower heat content of the alcohols. The adaptation of the carburettor was in the form of enlarging the main metering jet. Allowances for the alcohol's lower specfic gravity were made during fuel metering.Owing to the low front end volatility of methanol and ethanol, it was expected that `start up' problems would occur. An experimental programme was set up to determine the temperature range for a minimum required percentage `take off' that would ease start-up since it was determined that a `take off' of about 5% v/v liquid in the vapour phase would be sufficient for starting. Additions such as iso-pentane and n-pentane were used to improve the front end volatility. This proved to be successful.The lower heat content of the alcohol fuels also meant that a greater charge of fuel would be required. This was seen to pose further problems with fuel distribution from the carburettor to the individual cylinders on a multicylinder engine. Since it was not possible to modify the existing manifold on the Fiat 127 engine, experimental tests on manifold geometry were carried out using the Ricardo E6 single cylinder variable compression engine. Results from these tests showed that the length, shape and cross-sectional area of the manifold play an important part in the distribution of the fuel entering the cylinder, ie. vapour phase, vapour/small liquid droplet/liquid film phase, vapour/large liquid droplet/liquid film phase etc.The solvent properties of the alcohols and their greater electrical conductivity suggested that the materials used on the engine would be prone to chemical attack. In order to determine the type and rate of chemical attack, an experimental programme was set up whereby carburettor and other components were immersed in the alcohols and in blends of alcohol with gasoline. The test fuels were aerated and in some instances kept at temperatures ranging from 50oC to 90oC. Results from these tests suggest that not all materials used in the conventional engine are equally suitable for use with alcohols and alcohol/gasoline blends. Aluminium for instance was severely attacked by methanol causing pitting and pin-holing in the surface.In general this whole experimental programme gave valuable information on the acceptability of substitute fuels. While the long term effects of alcohol use merit further study, it is clear that methanol and ethanol will be increasingly used in place of gasoline.

An investigation into the antecedents of prosocial service behaviours : a travel service context

Frontline employee (FLE) attitudes and behaviours during service encounters influence customers’ perceptions of service quality and customer satisfaction. The identification of variables that influence FLEs service behaviours is, therefore, important. Much remains unknown about the factors affecting prosocial service behaviours (PSBs). This thesis answers the following questions: What are the antecedents of PSBs in a travel service setting? It is argued that managerial strategies indirectly influence PSBs via their direct influence on job attitudes. This thesis represents an attempt towards an increased knowledge about the antecedents of PSBs by seeking answers to the question. A conceptual model was developed from the literature. Briefly stated, the hypothesised model proposed that job attitudes mediate the relationship between managerial strategies and the PSBs. In-depth interviews provided initial support for the conceptual model. Structural equation modelling techniques were then used to test these relationships on data from 179 travel service employees. Partial support for the mediational role of job attitudes was found. More specifically, the relationship between professional development and extra-role customer service is mediated by job satisfaction and organisational commitment, but not in-role customer service and cooperation. The managerial strategies influence PSBs directly. Internal communication influences extra- and in-role customer service behaviours positively. The relationship between professional development and the three PSBs constructs is negative. Empowerment influences in-role customer service and cooperative behaviours positively.

Automobile friction materials: a test instrument and technique for determining dynamic mechanical properties in relation to brake squeal

This study is primarily concerned with the problem of break-squeal in disc brakes, using moulded organic disc pads. Moulded organic friction materials are complex composites and due to this complexity it was thought that they are unlikely to be of uniform composition. Variation in composition would under certain conditions of the braking system, cause slight changes in its vibrational characteristics thus causing resonance in the high audio-frequency range. Dynamic mechanical propertes appear the most likely parameters to be related to a given composition's tendency to promote squeal. Since it was necessary to test under service conditions a review was made of all the available commercial test instruments but as none were suitable it was necessary to design and develop a new instrument. The final instrument design, based on longitudinal resonance, enabled modulus and damping to be determined over a wide range of temperatures and frequencies. This apparatus has commercial value since it is not restricted to friction material testing. Both used and unused pads were tested and although the cause of brake squeal was not definitely established, the results enabled formulation of a tentative theory of the possible conditions for brake squeal. The presence of a temperature of minimum damping was indicated which may be of use to braking design engineers. Some auxilIary testing was also performed to establish the effect of water, oil and brake fluid and also to determine the effect of the various components of friction materials.

Market orientation of hotels and travel services in China

China is unique both politically and economically. How this uniqueness impacts on firms'' adoption of market orientation and the impact of market orientation on business performance, however, remain unclear. This book reports a study by Dr Riliang Qu who aims to address the above knowledge void. The study employs a two-stage research strategy including interviews and a survey of 1000 hotels and travel services. The study found that government regulations restricting the firm rivalry and the shortage of competent managerial talents are among the most serious constraints to the firms'' development of market orientation along with such factors as inadequacy of government regulation on product quality and consumer protection. The findings suggest that in transitional like China, government actions could be a major force behind firms'' aspiration of being market-oriented. The study also found that the benefits of market orientation are multi-fold in that it not only improves company''s business performance but also has positive effects on customer satisfaction/retention, power in distribution channel, and corporate social responsibility.

How to manual:the valuation of rural travel time savings in least developed countries (LDCs)

The manual is designed to bring out issues that are relevant in the valuation of rural travel time savings in Least Developed Countries (LDCs). It should also be relevant for other developing countries which do not have LDC status but have rural economy features typical of low income developing countries. The manual elaborates step-by-step procedures on how to design and execute studies to estimate the value of time (VoT) savings of rural travellers.

Managing the threat of terrorism in British travel and leisure organizations

Purpose - To study how the threats of terrorism are being handled by a variety of UK companies in the travel and leisure sector in the UK in the post 9/11 era. Design/methodology/approach - A review of the literature of risk management in a world that is perceived to be more risky as a result of the terrorist attacks on the US on 11 September 2001 (9/11) is presented. Describes the application of theories of organizational resilience and institutions to frame an understanding of how managers make sense of terrorism risk and comprehend uncertainty. Reports a qualitative analysis of themes in interviews conducted with 25 managers from 6 unnamed organizations in the aviation industry (3 organizations) and the UK travel and leisure industry (3 organizations), representing a catering supplier, an airport, an airline, a tour company, a convention centre, and an arts and entertainment centre. Findings - The results indicated that the three organizations in the aviation industry prioritize threats from terrorism, whilst the three organizations in the leisure and travel sector do not, suggesting that the managers in the travel and leisure industry apply a probabilistic type of thinking and believe the likelihood of terrorism to be low. Reports that they give precedence to economic concerns and numerous other threats to the industry. Concludes that managers fall prey to the 'ludic fallacy', which conceives all odds as being calculable and hence managers conceive the terrorism risk as low while also expecting institutional factors to pre-empt and control terrorism threats, a reaction which the authors believe to be rather complacent and dangerous. Originality/value - Contributes to the research literature on risk management by revealing the gap in the ability of existing management tools and methodologies to deal with current and uncertain threats facing organizations due to terrorism.

Transfer of patients from health care centres to special care services:analysis of travel distances in Nordic countries

Objectives: This paper highlights the importance of analysing patient transportation in Nordic circumpolar areas. The research questions we asked are as follows: How many Finnish patients have been transferred to special care intra-country and inter-country in 2009? Does it make any difference to health care policymakers if patients are transferred inter-country? Study design: We analysed the differences in distances from health care centres to special care services within Finland, Sweden and Norway and considered the health care policy implica tions. Methods: An analysis of the time required to drive between service providers using the "Google distance meter" (http://maps.google.com/); conducting interviews with key Finnish stakeholders; and undertaking a quantitative analyses of referral data from the Lapland Hospital District. Results: Finnish patients are generally not transferred for health care services across national borders even if the distances are shorter. Conclusion: Finnish patients have limited access to health care services in circumpolar are as across the Nordic countries for 2 reasons. First, health professionals in Norway and Sweden do not speak Finnish, which presents a language problem. Second, The Social Insurance Institution of Finland does not cover the expenditures of travel or the costs of medicine. In addition, it seems that in circumpolar areas the density of Finnish service providers is greater than Swedish ones, causing many Swedish citizens to transfer to Finnish health care providers every year. However, future research is needed to determine the precise reasons for this.

Matching theory based travel plan aware charging algorithms in V2G smart grid networks

The frequency, time and places of charging have large impact on the Quality of Experience (QoE) of EV drivers. It is critical to design effective EV charging scheduling system to improve the QoE of EV drivers. In order to improve EV charging QoE and utilization of CSs, we develop an innovative travel plan aware charging scheduling scheme for moving EVs to be charged at Charging Stations (CS). In the design of the proposed charging scheduling scheme for moving EVs, the travel routes of EVs and the utility of CSs are taken into consideration. The assignment of EVs to CSs is modeled as a two-sided many-to-one matching game with the objective of maximizing the system utility which reflects the satisfactory degrees of EVs and the profits of CSs. A Stable Matching Algorithm (SMA) is proposed to seek stable matching between charging EVs and CSs. Furthermore, an improved Learning based On-LiNe scheduling Algorithm (LONA) is proposed to be executed by each CS in a distributed manner. The performance gain of the average system utility by the SMA is up to 38.2% comparing to the Random Charging Scheduling (RCS) algorithm, and 4.67% comparing to Only utility of Electric Vehicle Concerned (OEVC) scheme. The effectiveness of the proposed SMA and LONA is also demonstrated by simulations in terms of the satisfactory ratio of charging EVs and the the convergence speed of iteration.