A method for systematic artifact selection decision making

Artifact selection decisions typically involve the selection of one from a number of possible/candidate options (decision alternatives). In order to support such decisions, it is important to identify and recognize relevant key issues of problem solving and decision making (Albers, 1996; Harris, 1998a, 1998b; Jacobs & Holten, 1995; Loch & Conger, 1996; Rumble, 1991; Sauter, 1999; Simon, 1986). Sauter classifies four problem solving/decision making styles: (1) left-brain style, (2) right-brain style, (3) accommodating, and (4) integrated (Sauter, 1999). The left-brain style employs analytical and quantitative techniques and relies on rational and logical reasoning. In an effort to achieve predictability and minimize uncertainty, problems are explicitly defined, solution methods are determined, orderly information searches are conducted, and analysis is increasingly refined. Left-brain style decision making works best when it is possible to predict/control, measure, and quantify all relevant variables, and when information is complete. In direct contrast, right-brain style decision making is based on intuitive techniques—it places more emphasis on feelings than facts. Accommodating decision makers use their non-dominant style when they realize that it will work best in a given situation. Lastly, integrated style decision makers are able to combine the left- and right-brain styles—they use analytical processes to filter information and intuition to contend with uncertainty and complexity.

A method for systematic artifact selection decision making

Artifact selection decisions typically involve the selection of one from a number of possible/candidate options (decision alternatives). In order to support such decisions, it is important to identify and recognize relevant key issues of problem solving and decision making (Albers, 1996; Harris, 1998a, 1998b; Jacobs & Holten, 1995; Loch & Conger, 1996; Rumble, 1991; Sauter, 1999; Simon, 1986). Sauter classifies four problem solving/decision making styles: (1) left-brain style, (2) right-brain style, (3) accommodating, and (4) integrated (Sauter, 1999). The left-brain style employs analytical and quantitative techniques and relies on rational and logical reasoning. In an effort to achieve predictability and minimize uncertainty, problems are explicitly defined, solution methods are determined, orderly information searches are conducted, and analysis is increasingly refined. Left-brain style decision making works best when it is possible to predict/control, measure, and quantify all relevant variables, and when information is complete. In direct contrast, right-brain style decision making is based on intuitive techniques—it places more emphasis on feelings than facts. Accommodating decision makers use their non-dominant style when they realize that it will work best in a given situation. Lastly, integrated style decision makers are able to combine the left- and right-brain styles—they use analytical processes to filter information and intuition to contend with uncertainty and complexity.

Relevance of motion artifact in electromyography recordings during vibration treatment

Electromyography readings (EMGs) from quadriceps of fifteen subjects were recorded during whole body vibration treatment at different frequencies (10-50 Hz). Additional electrodes were placed on the patella to monitor the occurrence of motion artifact, triaxial accelerometers were placed onto quadriceps to monitor motion. Signal spectra revealed sharp peaks corresponding to vibration frequency and its harmonics, in accordance with the accelerometer data. EMG total power was compared to that associated with vibration harmonics narrow bands, before and during vibration. On average, vibration associated power resulted in only 3% (±0.9%) of the total power prior to vibration and 29% (±13.4%) during vibration. Often, studies employ surface EMG to quantitatively evaluate vibration evoked muscular activity and to set stimulation frequency. However, previous research has not accounted for motion artifacts. The data presented in this study emphasize the need for the removal of motion artifacts, as they consistently affect RMS estimation, which is often used as a concise muscle activity index during vibrations. Such artifacts, rather unpredictable in amplitude, might be the cause of large inter-study differences and must be eliminated before analysis. Motion artifact filtering will contribute to thorough and precise interpretation of neuromuscular response to vibration treatment. © 2008 Elsevier Ltd. All rights reserved.

Muscle movement and electrodes motion artifact during vibration treatment

Vibration treatment by oscillating platforms is more and more employed in the fields of exercise physiology and bone research. The rationale of this treatment is based on the neuromuscular system response elicited by vibration loads. surface Electromyography (EMG) is largely utilized to assess muscular response elicited by vibrations and Root Mean Square of the electromyography signals is often used as a concise quantitative index of muscle activity; in general, EMG envelope or RMS is expected to increase during vibration. However, it is well known that during surface bio-potential recording, motion artifacts may arise from relative motion between electrodes and skin and between skin layers. Also the only skin stretch, modifying the internal charge distribution, results in a variation of electrode potential. The aim of this study is to highlight the movements of muscles, and the succeeding relevance of motion artifacts on electrodes, in subjects undergoing vibration treatments. EMGs from quadriceps of fifteen subjects were recorded during vibration at different frequencies (15-40 Hz); Triaxial accelerometers were placed onto quadriceps, as close as possible to muscle belly, to monitor motion. The computed muscle belly displacements showed a peculiar behavior reflecting the mechanical properties of the structures involved. Motion artifact related to the impressed vibration have been recognized and related to movement of the soft tissues. In fact large artifacts are visible on EMGs and patellar electrodes recordings during vibration. Signals spectra also revealed sharp peaks corresponding to vibration frequency and its harmonics, in accordance with accelerometers data. © 2008 Springer-Verlag.

Data driven ontology evaluation

The evaluation of ontologies is vital for the growth of the Semantic Web. We consider a number of problems in evaluating a knowledge artifact like an ontology. We propose in this paper that one approach to ontology evaluation should be corpus or data driven. A corpus is the most accessible form of knowledge and its use allows a measure to be derived of the ‘fit’ between an ontology and a domain of knowledge. We consider a number of methods for measuring this ‘fit’ and propose a measure to evaluate structural fit, and a probabilistic approach to identifying the best ontology.

The ontology: Chimaera or Pegasus

In the context of the needs of the Semantic Web and Knowledge Management, we consider what the requirements are of ontologies. The ontology as an artifact of knowledge representation is in danger of becoming a Chimera. We present a series of facts concerning the foundations on which automated ontology construction must build. We discuss a number of different functions that an ontology seeks to fulfill, and also a wish list of ideal functions. Our objective is to stimulate discussion as to the real requirements of ontology engineering and take the view that only a selective and restricted set of requirements will enable the beast to fly.

Leadership and the negotiation of order in small groups

This thesis is focussed on the role differentiationhypothesis as it relates to small groups (Bales, 1958). The hypothesis is systematically examined, both conceptually and empirically, in the light of the Equilibrium Hypothesis (Bales, 1953) and the Negotiated Order Theory of leadership (e.g. Hosking, 1988). Chapter 1 sketches in a context for the research,which was stimulated by attempts during the 60s and 70s to organise small groups without leaders (the leaderless group, based on isocratic principles). Chapter 2 gives a conceptual and developmental overview of Bales' work, concentrating on the Equilibrium Hypothesis. It is argued that Bales' conceptual approach, if developed, can potentially integrate the disparate small groups and leadership literatures. Chapters 3 and 4 examine the concepts `group', `leader' and `leadership' in terms of the Negotiated Order perspective. In chapter 3 it is argued that two aspects of the concept group need to be taken separately into account; physical attributes and social psychological aspects (the metaphysical glue). It is further argued that a collection of people becomes a group only when they begin to establish a shared sense of social order. In chapter 4 it is argued that leadership is best viewed as a process of negotiation between those who influence and those who are influenced, in the context of shared values about means and ends. It is further argued that leadership is the process by which a shared sense of social order is established and maintained, thus linking the concepts `leadership' and `group' in a single formulation. The correspondences with Bales' approach are discussed at the end of the chapter. Chapters 5 to 8 present a detailed critical description and evaluation of the empirical work which claims to show role differentiation or test the hypothesis, both Bales original work and subsequent studies. It is argued here, that the measurement and analytical procedures adopted by Bales and others, in particular the use of simple means as summaries of group structures, are fundamentally flawed, and that role differentiation in relation to particular identifiable groups has not been demonstrated clearly anywhere in the literature. Chapters 9 to 13 present the empirical work conducted for the thesis. 18 small groups are examined systematically for evidence of role differentiation using an approach based on early sociometry (Moreno, 1934). The results suggest that role differentiation, as described by Bales, does not occur as often as is implied in the literature, and not equivocally in any case. In particular structures derived from Liking are typically distributed or weak. This suggests that one of Bales' principal findings, that Liking varies independently of his other main dimensions, is the product of statistical artifact. Chapter 14 presents a general summary of results and presents some considerations about future research.

An investigation of the factor-analytic approach to the determination of abilities involved in psychomotor learning

This research began with an attempt to solve a practical problem, namely, the prediction of the rate at which an operator will learn a task. From a review of the literature, communications with researchers in this area and the study of psychomotor learning in factories it was concluded that a more fundamental approach was required which included the development of a task taxonomy. This latter objective had been researched for over twenty years by E. A. Fleishman and his approach was adopted. Three studies were carried out to develop and extend Fleishman's approach to the industrial area. However, the results of these studies were not in accord with FIeishman's conclusions and suggested that a critical re-assessment was required of the arguments, methods and procedures used by Fleishman and his co-workers. It was concluded that Fleishman's findings were to some extent an artifact of the approximate methods and procedures which he used in the original factor analyses and that using the more modern computerised factor analytic methods a reliable ability taxonomy could be developed to describe the abilities involved in the learning of psychomotor tasks. The implications for a changing-task or changing-subject model were drawn and it was concluded that a changing task and subject model needs to be developed.

Ethnic groups as market segments: implications of the demand structure

Ethnic market potential in Britain has not yet been thoroughly researched. Important recent trends have focused mainly on the affective and emotional aspects of ethnicity, and included deliberations on the emergence of a revitalised neo-ethnic consciousness; its identification; politicisation, and the impact on it; of a rising third-world consciousness. This investigation attempts to take cognizance of the consuner demand of the ethnic Asian and West Indian groups, as specific market segments. It discusses the rationale for ethnic segmentation on the underlying premise, that the starting point for all product marketing is a response to perceived market opportunities. On the basis of this approach, the UK laundry detergent and automobile markets were investigated; as being representative of product categories constitutirg extremes along the purchase-search-time continuun in consuner decision-making. Ethnic groups were further analysed for their retail patronage patterns; media usage, and the differential effectiveness of alternative advertisirg strategies. The basic technique of marketing research namely the sample survey, was used with the aim of applying scientific techniques in obtaining information on ethnic groups. The integrated marketirg framework utilised allowed, moreover, for the collection of market research data on the specific issues of ethnic product penetration dealing with retailing, advertising and product promotion. The evidence highlights the fact that the cultural orientations of ethnic groups are instrunental in providing for differential demand structures. It points to the answer that ethnicity is an anchor not only for a deeper sense of identity; but also serves as a focus for the economic interests of ethnic groups. On this basis it is argued here, that since cultural levelling would eventually produce stagnation; current marketing strategies should utilise ethnic diversity as an econanic artifact; which; per se is necessary for profitability and growth; especially in innovative product design and development.

Femtosecond laser micro-inscription of optical coherence tomography resolution test artifacts

Optical coherence tomography (OCT) systems are becoming more commonly used in biomedical imaging and, to enable continued uptake, a reliable method of characterizing their performance and validating their operation is required. This paper outlines the use of femtosecond laser subsurface micro-inscription techniques to fabricate an OCT test artifact for validating the resolution performance of a commercial OCT system. The key advantage of this approach is that by utilizing the nonlinear absorption a three dimensional grid of highly localized point and line defects can be written in clear fused silica substrates.

A simulation of the surface EMG for analysis of muscle activity during whole body vibratory stimulation

Many studies have accounted for whole body vibration effects in the fields of exercise physiology, sport and rehabilitation medicine. Generally, surface EMG is utilized to assess muscular activity during the treatment; however, large motion artifacts appear superimposed to the raw signal, making sEMG recording not suitable before any artifact filtering. Sharp notch filters, centered at vibration frequency and at its superior harmonics, have been used in previous studies, to remove the artifacts. [6, 10] However, to get rid of those artifacts some true EMG signal is lost. The purpose of this study was to reproduce the effect of motor-unit synchronization on a simulated surface EMG during vibratory stimulation. In addition, authors mean to evaluate the EMG power percentage in those bands in which are also typically located motion artifact components. Model characteristics were defined to take into account two main aspect: the muscle MUs discharge behavior and the triggering effects that appear during local vibratory stimulation. [7] Inter-pulse-interval, was characterized by a polimodal distribution related to the MU discharge frequency (IPI 55-80ms, σ=12ms) and to the correlation with the vibration period within the range of ±2 ms due to vibration stimulus. [1, 7] The signals were simulated using different stimulation frequencies from 30 to 70 Hz. The percentage of the total simulated EMG power within narrow bands centered at the stimulation frequency and its superior harmonics (± 1 Hz) resulted on average about 8% (± 2.85) of the total EMG power. However, the artifact in those bands may contain more than 40% of the total power of the total signal. [6] Our preliminary results suggest that the analysis of the muscular activity of muscle based on raw sEMG recordings and RMS evaluation, if not processed during vibratory stimulation may lead to a serious overestimation of muscular response.

Muscle motion and EMG activity in vibration treatment

The aim of this study is to highlight the relationship between muscle motion, generated by whole body vibration, and the correspondent electromyographic (EMG) activity and to suggest a new method to customize the stimulation frequency. Simultaneous recordings of EMG and tri-axial accelerations of quadriceps rectus femoris from fifteen subjects undergoing vibration treatments were collected. Vibrations were delivered via a sinusoidal oscillating platform at different frequencies (10-45 Hz). Muscle motion was estimated by processing the accelerometer data. Large EMG motion artifacts were removed using sharp notch filters centred at the vibration frequency and its superior harmonics. EMG-RMS values were computed and analyzed before and after artifact suppression to assess muscular activity. Muscles acceleration amplitude increased with frequency. Muscle displacements revealed a mechanical resonant-like behaviour of the muscle. Resonance frequencies and dumping factors depended on subject. Moreover, RMS of artifact-free EMG was found well correlated (R 2 = 0.82) to the actual muscle displacement, while the maximum of the EMG response was found related to the mechanical resonance frequency of muscle. Results showed that maximum muscular activity was found in correspondence to the mechanical resonance of the muscle itself. Assuming the hypothesis that muscle activation is proportional to muscle displacement, treatment optimization (i.e. to choose the best stimulation frequency) could be obtained by simply monitoring local acceleration (resonance), leading to a more effective muscle stimulation. Motion artifact produced an overestimation of muscle activity, therefore its removal was essential. © 2009 IPEM.

Correspondence between muscle motion and EMG activity during whole body vibration

The aim of this study is to highlight the relation between muscle motion and electromyographyc activity during whole body vibration. This treatment is accounted for eliciting a reflex muscle activity in response to vibratory stimulation. Simultaneous recordings from quadriceps Rectus Femoris EMG and 3D muscle accelerations on fifteen subjects undergoing vibration treatments were collected. In our study vibrations were delivered via a sinusoidal oscillating platform at different frequencies (10-45 Hz), with a constant amplitude. Muscle motion was estimated by processing accelerometer data. Displacements revealed a mechanical resonant-like behaviour of the muscle; resonance frequencies and dumping factors depended on subject. Large EMG motion artifacts were removed using sharp notch filters centred at the vibration frequency and its superior harmonics. RMS values of artifact-free EMG were found correlated to the actual muscle displacement. The results were in accordance to the hypothesis of a proprioceptive response during vibration treatment. Nevertheless, motion artifacts produced an overestimation of muscle activity, therefore its removal was essential. © 2009 Springer Berlin Heidelberg.