Affect networks:a structural analysis of the relationship between work ties and job-related affect

The relationship between organizational networks and employees' affect was examined in 2 organizations. In Study 1, social network analysis of work ties and job-related affect for 259 employees showed that affect converged within work interaction groups. Similarity of affect between employees depended on the presence of work ties and structural equivalence. Affect was also related to the size and density of employees' work networks. Study 2 used a 10-week diary study of 31 employees to examine a merger of 2 organizational divisions and found that negative changes in employees' affect were related to having fewer cross-divisional ties and to experiencing greater reductions in network density. The findings suggest that affect permeates through and is shaped by organizational networks.

Analysis of the procedures associated with the decision to sub-contract work

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

An analysis of the effectiveness of a behavioural based safety intervention in a UK paper mill

This research examines a behavioural based safety (BBS) intervention within a paper mill in the South East of England. Further to this intervention two other mills are examined for the purposes of comparison — one an established BBS programme and the other an improving safety management system through management ownership. BBS programmes have become popular within the UK, but most of the research about their efficacy is carried out by the BBS providers themselves. This thesis aims to evaluate a BBS intervention from a standpoint which is not commercially biased in favour of BBS schemes. The aim of a BBS scheme is to either change personnel behaviours or attitudes, which in turn will positively affect the organisation's safety culture. The research framework involved a qualitative methodology in order to examine the effects of the intervention on the paper mill's safety culture. The techniques used were questionnaires and semi structured interviews, in addition to observation and discussions which were possible because of the author's position as participant observer. The results demonstrated a failure to improve any aspect of the mill's safety culture, which worsened following the BBS intervention. Issues such as trust, morale, communication and support of management showed significant signs of negative workforce response. The paper mill where the safety management system approach was utilised demonstrated a significantly improved safety culture and achieved site ownership from middle managers and supervisors. Research has demonstrated that a solid foundation is required prior to successfully implementing a BBS programme. For a programme to work there must be middle management support in addition to senior management commitment. If a trade union actively distances itself from BBS, it is also unlikely to be effective. This thesis proposes that BBS observation programmes are not suitable for the papermaking industry, particularly when staffing levels are low due to challenging economic conditions. Observers are not available when there are high hazard situations and this suggests that BBS implementation is not the correct intervention for the paper industry.

An evaluative analysis of the practice of teamwork in Health and Personal Social Services

This report describes the practice of teamwork as expressed in case conferences for care of the elderly and evaluates the effectiveness of case conferences in their contribution to care. The study involved the observation of more than two hundred case conferences in sixteen locations throughout the West Midlands, in which one thousand seven hundred and three participants were involved. Related investigation of service outcomes involved an additional ninety six patients who were interviewed in their homes. The pu`pose of the study was to determine whether the practice of teamwork and decision-making in case conferences is a productive and cost effective method of working. Preliminary exploration revealed the extent to which the team approach is part of the organisational culture and which, it is asserted, serves to perpetuate the mythical value of team working. The study has demonstrated an active subscription to the case conference approach, yet has revealed many weaknesses, not least of which is clear evidence that certain team members are inhibited in their contribution. Further, that the decisional process in case conferences has little consequence to care outcome. Where outcomes are examined there is evidence of service inadequacy. This work presents a challenge to professionals to confront their working practices with honesty and with vision, in the quest for the best and most cost effective service to patients.

An analysis of the effect of process parameters on the formability of sheet metal

This investigation is in two parts, theory and experimental verification. (1) Theoretical Study In this study it is, for obvious reasons, necessary to analyse the concept of formability first. For the purpose of the present investigation it is sufficient to define the four aspects of formability as follows: (a) the formability of the material at a critical section, (b) the formability of the material in general, (c) process efficiency, (d) proportional increase in surface area. A method of quantitative assessment is proposed for each of the four aspects of formability. The theoretical study also includes the distinction between coaxial and non-coaxial strains which occur, respectively, in axisymmetrical and unsymmetrical forming processes and the inadequacy of the circular grid system for the assessment of formability is explained in the light of this distinction. (2) Experimental Study As one of the bases of the experimental work, the determination of the end point of a forming process, which sets the limit to the formability of the work material, is discussed. The effects of three process parameters on draw-in are shown graphically. Then the delay of fracture in sheet metal forming resulting from draw-in is analysed in kinematical terms, namely, through the radial displacements, the radial and the circumferential strains, and the projected thickness of the workpiece. Through the equilibrium equation of the membrane stresses, the effect on the shape of the unsupported region of the workpiece, and hence the position of the critical section is explained. Then, the effect of draw-in on the four aspects of formability is discussed throughout this investigation. The triangular coordinate system is used to present and analyse the triaxial strains involved. This coordinate system has the advantage of showing all the three principal strains in a material simultaneously, as well as representing clearly the many types of strains involved in sheet metal work.

Analysis of the intraocular pressure pulse

This thesis was concerned with investigating methods of improving the IOP pulse’s potential as a measure of clinical utility. There were three principal sections to the work. 1. Optimisation of measurement and analysis of the IOP pulse. A literature review, covering the years 1960 – 2002 and other relevant scientific publications, provided a knowledge base on the IOP pulse. Initial studies investigated suitable instrumentation and measurement techniques. Fourier transformation was identified as a promising method of analysing the IOP pulse and this technique was developed. 2. Investigation of ocular and systemic variables that affect IOP pulse measurements In order to recognise clinically important changes in IOP pulse measurement, studies were performed to identify influencing factors. Fourier analysis was tested against traditional parameters in order to assess its ability to detect differences in IOP pulse. In addition, it had been speculated that the waveform components of the IOP pulse contained vascular characteristic analogous to those components found in arterial pulse waves. Validation studies to test this hypothesis were attempted. 3. The nature of the intraocular pressure pulse in health and disease and its relation to systemic cardiovascular variables. Fourier analysis and traditional parameters were applied to the IOP pulse measurements taken on diseased and healthy eyes. Only the derived parameter, pulsatile ocular blood flow (POBF) detected differences in diseased groups. The use of an ocular pressure-volume relationship may have improved the POBF measure’s variance in comparison to the measurement of the pulse’s amplitude or Fourier components. Finally, the importance of the driving force of pulsatile blood flow, the arterial pressure pulse, is highlighted. A method of combining the measurements of pulsatile blood flow and pulsatile blood pressure to create a measure of ocular vascular impedance is described along with its advantages for future studies.

Comparing German and British political culture through values : and analysis of the values of health care reform

This research sets out to compare the values in British and German political discourse, especially the discourse of social policy, and to analyse their relationship to political culture through an analysis of the values of health care reform. The work proceeds from the hypothesis that the known differences in political culture between the two countries will be reflected in the values of political discourse, and takes a comparison of two major recent legislative debates on health care reform as a case study. The starting point in the first chapter is a brief comparative survey of the post-war political cultures of the two countries, including a brief account of the historical background to their development and an overview of explanatory theoretical models. From this are developed the expected contrasts in values in accordance with the hypothesis. The second chapter explains the basis for selecting the corpus texts and the contextual information which needs to be recorded to make a comparative analysis, including the context and content of the reform proposals which comprise the case study. It examines any contextual factors which may need to be taken into account in the analysis. The third and fourth chapters explain the analytical method, which is centred on the use of definition-based taxonomies of value items and value appeal methods to identify, on a sentence-by-sentence basis, the value items in the corpus texts and the methods used to make appeals to those value items. The third chapter is concerned with the classification and analysis of values, the fourth with the classification and analysis of value appeal methods. The fifth chapter will present and explain the results of the analysis, and the sixth will summarize the conclusions and make suggestions for further research.

Theoretical perspectives in purchasing and supply chain management:an analysis of the literature

Purpose – This paper attempts to seek answers to four questions. Two of these questions have been borrowed (but adapted) from the work of Defee et al.: RQ1. To what extent is theory used in purchasing and supply chain management (P&SCM) research? RQ2. What are the prevalent theories to be found in P&SCM research? Following on from these questions an additional question is posed: RQ3. Are theory-based papers more highly cited than papers with no theoretical foundation? Finally, drawing on the work of Harland et al., the authors have added a fourth question: RQ4. To what extent does P&SCM meet the tests of coherence, breadth and depth, and quality necessary to make it a scientific discipline? Design/methodology/approach – A systematic literature review was conducted in accordance with the model outlined by Tranfield et al. for three journals within the field of “purchasing and supply chain management”. In total 1,113 articles were reviewed. In addition a citation analysis was completed covering 806 articles in total. Findings – The headline features from the results suggest that nearly a decade-and-a-half on from its development, the field still lacks coherence. There is the absence of theory in much of the work and although theory-based articles achieved on average a higher number of citations than non-theoretical papers, there is no obvious contender as an emergent paradigm for the discipline. Furthermore, it is evident that P&SCM does not meet Fabian's test necessary to make it a scientific discipline and is still some way from being a normal science. Research limitations/implications – This study would have benefited from the analysis of further journals, however the analysis of 1,113 articles from three leading journals in the field of P&SCM was deemed sufficient in scope. In addition, a further significant line of enquiry to follow is the rigour vs relevance debate. Practical implications – This article is of interest to both an academic and practitioner audience as it highlights the use theories in P&SCM. Furthermore, this article raises a number of important questions. Should research in this area draw more heavily on theory and if so which theories are appropriate? Social implications – The broader social implications relate to the discussion of how a scientific discipline develops and builds on the work of Fabian and Amundson. Originality/value – The data set for this study is significant and builds on a number of previous literature reviews. This review is both greater in scope than previous reviews and is broader in its subject focus. In addition, the citation analysis (not previously conducted in any of the reviews) and statistical test highlights that theory-based articles are more highly cited than non-theoretically based papers. This could indicate that researchers are attempting to build on one another's work.

On the F word:a corpus-based analysis of the media representation of feminism in British and German press discourse, 1990-2009

Research in social psychology has shown that public attitudes towards feminism are mostly based on stereotypical views linking feminism with leftist politics and lesbian orientation. It is claimed that such attitudes are due to the negative and sexualised media construction of feminism. Studies concerned with the media representation of feminism seem to confirm this tendency. While most of this research provides significant insights into the representation of feminism, the findings are often based on a small sample of texts. Also, most of the research was conducted in an Anglo-American setting. This study attempts to address some of the shortcomings of previous work by examining the discourse of feminism in a large corpus of German and British newspaper data. It does so by employing the tools of Corpus Linguistics. By investigating the collocation profiles of the search term feminism, we provide evidence of salient discourse patterns surrounding feminism in two different cultural contexts. © The Author(s) 2012.