Advanced UV inscribed fibre grating structures and applications in optical sensing and laser systems

This thesis presents detailed investigation of UV inscribed fibre grating based devices and novel developments in the applications of such devices in optical sensing and fibre laser systems. The major contribution of this PhD programme includes the systematic study on fabrication, spectral characteristics and applications of different types of UV written in-fibre gratings such as Type I and IA Fibre Bragg Gratings (FBGs), Chirped Fibre Bragg Gratings (CFBGs) and Tilted Fibre Gratings (TFGs) with small, large and 45º tilted structures inscribed in normal silica fibre. Three fabrication techniques including holographic, phase-mask and blank beam exposure scanning, which were employed to fabricate a range of gratings in standard single mode fibre, are fully discussed. The thesis reports the creation of smart structures with self-sensing capability by embedding FBG-array sensors in Al matrix composite. In another part of this study, we have demonstrated the particular significant improvements made in sensitising standard FBGs to the chemical surrounding medium by inducing microstructure to the grating by femtosecond (fs) patterning assisted chemical etching technique. Also, a major work is presented for the investigation on the structures, inscription methods and spectral Polarisation Dependent Loss (PDL) and thermal characteristics of different angle TFGs. Finally, a very novel application in realising stable single polarisation and multiwavelength switchable Erbium Doped Fibre Lasers (EDFLs) using intracavity polarisation selective filters based on TFG devices with tilted structures at small, large and exact 45° angles forms another important contribution of this thesis.

A survey of self-awareness and its application in computing systems

Novel computing systems are increasingly being composed of large numbers of heterogeneous components, each with potentially different goals or local perspectives, and connected in networks which change over time. Management of such systems quickly becomes infeasible for humans. As such, future computing systems should be able to achieve advanced levels of autonomous behaviour. In this context, the system's ability to be self-aware and be able to self-express becomes important. This paper surveys definitions and current understanding of self-awareness and self-expression in biology and cognitive science. Subsequently, previous efforts to apply these concepts to computing systems are described. This has enabled the development of novel working definitions for self-awareness and self-expression within the context of computing systems.

Biomass-based small and micro combined heat and power (CHP) systems:application and status in the United Kingdom

This chapter discusses the current state of biomass-based combined heat and power (CHP) production in the UK. It presents an overview of the UK's energy policy and targets which are relevant to the deployment of biomass-based CHP and summarises the current state for renewable, biomass and CHP. A number of small-scale biomass-based CHP projects are described while providing some indicative capital costs for combustion, pyrolysis and gasification technologies. For comparison purposes, it presents an overview of the respective situation in Europe and particularly in Sweden, Finland and Denmark. There is also a brief comment about novel CHP technologies in Austria. Finally it draws some conclusions on the potential of small-scale biomass CHP in the UK. © 2011 Woodhead Publishing Limited All rights reserved.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

Reliability monitoring, feedback and improvement systems:their application in the machine tool industry

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Leadership in high-value services for manufacturers:advanced services and their impact on vertical integration

The debate about services-led competitive strategies continues to grow with much interest emerging around the differing practices between production and servitised operations. This paper contributes to this discussion byinvestigating the vertical integration practice (in particular the micro-vertical integration otherwise known as the supply chain position)of manufacturers who are successful in their adoption of servitization.Although these are preliminary findings from a longer-term research programme, through this technical note we seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Keyword: Servitization, Product-Service Systems, Through-life Services.

Integrating group Delphi, fuzzy logic and expert systems for marketing strategy development:the hybridisation and its effectiveness

A hybrid approach for integrating group Delphi, fuzzy logic and expert systems for developing marketing strategies is proposed in this paper. Within this approach, the group Delphi method is employed to help groups of managers undertake SWOT analysis. Fuzzy logic is applied to fuzzify the results of SWOT analysis. Expert systems are utilised to formulate marketing strategies based upon the fuzzified strategic inputs. In addition, guidelines are also provided to help users link the hybrid approach with managerial judgement and intuition. The effectiveness of the hybrid approach has been validated with MBA and MA marketing students. It is concluded that the hybrid approach is more effective in terms of decision confidence, group consensus, helping to understand strategic factors, helping strategic thinking, and coupling analysis with judgement, etc.

An exploratory study of management accounting and control systems in a developing country

This thesis reports on the results of case studies in four commercial banks in Nigeria. The study focuses how management accounting and control systems (MCS) operate in the four banks. The study is motivated by the dearth of literature on management accounting practices in the developing world in general and in Nigeria in specific. The case study approach adopted in conducting the research was useful in exploring the dynamics of the MCS in the organisations. Data was gathered from two sources. First, semi-structured interviews were conducted with managers at the head office, regional office and branches of each bank. The participants were selected from different backgrounds and managerial levels to provide broader understanding of the operations of the MCS. Second, various internal and external documents were reviewed to provide supporting evidence for the interview results. New institutional sociology (NIS) provided the theoretical framework to understand the results. NIS provided explanations for how the MCS in the four banks were shaped by diverse external and internal factors. The key factors identified as shaping the operations of the MCS were the need to comply with the regulatory environment (coercive isomorphism), the need to maintain social and cultural support (normative isomorphism) and the need to imitate successful organisations in order to appear legitimate (mimetic isomorphism). The study also examines the interplay between the institutional forces, market forces and infra-organisational power relations. This analysis is necessary to overcome the criticism of NIS that it downplays the role of market forces, agency and intra-organisational relations. The findings of the study have implications for understanding the operations of MCS in the developing world.

Strategy and control systems:a framework for analysis

This research explores the links between the strategies adopted by companies and the mechanisms used to control the organisation. This is not seen as a one way process with the control system following from the strategy but rather as an interactive process between the control systems, the environment and the business strategy. The main proposition of the research, derived from a review of the relevant literature, is that the dimensions of Business Pro-Activity and Environmental Change provide a plausible explanation of the reasons why companies need to adopt different strategies in order to be successful in different markets. A model is proposed which links these dimensions with the business strategy, organisational structure, strategic planning system and management control systems. The model is used as a framework for analysing four companies in order to further our understanding of these interactions and the mechanisms which act to both promote and resist change. Whilst it is not suggested that the model in its present form is a perfect instrument it has, during the course of this research, proved to be an appropriate framework for analysing the various mechanisms used by four companies to formulate and implement their strategies. The research reveals that these should not be viewed independently but as a balanced system.

Modulation of certain 5-HT-related behaviours by serotonergic and noradrenergic systems

The modulation of 5-hydroxytryptamine (5-HT)-related head-twitchbehaviour by antimigraine drugs and migraine triggers was examined inmice. The antimigraine drugs examined produced either inhibition or noeffect on 5-HT-related head-twitching. On the basis of these resultsit is suggested that 5-HT-related head-twitching is unlikely to beuseful in the preclinical screening and discovery of systemically-activeantimigraine agents. The migraine triggers examined, tyramineand beta-PEA initially produced a repeatable complex time-relatedeffect on 5-HT-related head-twitching, with both inhibition andpotentiation of this behaviour being observed, however, when furtherexamination of the effect of the migraine triggers on 5-HT-relatedhead-twitching was attempted some time later the effects seeninitially were no longer produced. The effect of (±)-1-<2, 5-dimethoxy-4-iodophenyl)-2-aminopropane,((±)DOl), on on-going behaviour of mice and rats was examined. Shakingbehaviour was observed in both species. In mice, excessive scratchingbehaviour was also present. (±)DOl-induced scratching and shakingbehaviour were found to be differentially modulated by noradrenergicand serotonergic agents, however, the fact that both behaviours wereblocked by ritanserin (5-HT2/5-HT1c receptor antagonist) and inhibitedby FLA-63 (a dopamine-beta-oxidase inhibitor which depletesnoradrenaline), suggests the pathways mediating these behaviours mustbe convergent in some manner, and that both behaviours require intact5-HT receptors, probably 5-HT2 receptors, for their production. Ingeneral, the behavioural profile of (±)DOI was as expected for anagent which exhibits high affinity binding to 5-HT2/5-HT1c receptors.Little sign of the 5-HTl-related '5-HT syndrome' was seen in eithermice or rats. The effect of a variety of noradrenergic agents on head-twitchinginduced by a variety of shake-inducing agents was examined. A patternof modulatory effect was seen whereby the modulatory effect of thenoradrenergic agents on 5-hydroxytryptophan <5-HTP) (and in some cases, 5-methoxy-N,N-dimethyltryptamine (5-MeODMT)) was found to be the opposite of that observed with quipazine and (±)DOI. The relationship between these effects, and their implications for understanding the pharmacology of centrally acting drugs is discussed.

The application of expert systems techniques in the design of durable concrete

This thesis describes work done exploring the application of expert system techniques to the domain of designing durable concrete. The nature of concrete durability design is described and some problems from the domain are discussed. Some related work on expert systems in concrete durability are described. Various implementation languages are considered - PROLOG and OPS5, and rejected in favour of a shell - CRYSTAL3 (later CRYSTAL4). Criteria for useful expert system shells in the domain are discussed. CRYSTAL4 is evaluated in the light of these criteria. Modules in various sub-domains (mix-design, sulphate attack, steel-corrosion and alkali aggregate reaction) are developed and organised under a BLACKBOARD system (called DEX). Extensions to the CRYSTAL4 modules are considered for different knowledge representations. These include LOTUS123 spreadsheets implementing models incorporating some of the mathematical knowledge in the domain. Design databases are used to represent tabular design knowledge. Hypertext representations of the original building standards texts are proposed as a tool for providing a well structured and extensive justification/help facility. A standardised approach to module development is proposed using hypertext development as a structured basis for expert systems development. Some areas of deficient domain knowledge are highlighted particularly in the use of data from mathematical models and in gaps and inconsistencies in the original knowledge source Digests.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

Managing enterprises and ERP systems:a contingency model for the enterprization of operations

Purpose: The purpose of this paper is to investigate enterprise resource planning (ERP) systems development and emerging practices in the management of enterprises (i.e. parts of companies working with parts of other companies to deliver a complex product and/or service) and identify any apparent correlations. Suitable a priori contingency frameworks are then used and extended to explain apparent correlations. Discussion is given to provide guidance for researchers and practitioners to deliver better strategic, structural and operational competitive advantage through this approach; coined here as the "enterprization of operations". Design/methodology/approach: Theoretical induction uses a new empirical longitudinal case study from Zoomlion (a Chinese manufacturing company) built using an adapted form of template analysis to produce a new contingency framework. Findings: Three main types of enterprises and the three main types of ERP systems are defined and correlations between them are explained. Two relevant a priori frameworks are used to induct a new contingency model to support the enterprization of operations; known as the dynamic enterprise reference grid for ERP (DERG-ERP). Research limitations/implications: The findings are based on one longitudinal case study. Further case studies are currently being conducted in the UK and China. Practical implications: The new contingency model, the DERG-ERP, serves as a guide for ERP vendors, information systems management and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structure and ERP systems. Originality/value: This research explains how ERP systems and the effective management of enterprises should develop in order to sustain competitive advantage with respect to enterprise strategy, enterprise structure and ERP systems use. © Emerald Group Publishing Limited.

A predictive in vitro model of the impact of drugs with anticholinergic properties on human neuronal and astrocytic systems

The link between off-target anticholinergic effects of medications and acute cognitive impairment in older adults requires urgent investigation. We aimed to determine whether a relevant in vitro model may aid the identification of anticholinergic responses to drugs and the prediction of anticholinergic risk during polypharmacy. In this preliminary study we employed a co-culture of human-derived neurons and astrocytes (NT2.N/A) derived from the NT2 cell line. NT2.N/A cells possess much of the functionality of mature neurons and astrocytes, key cholinergic phenotypic markers and muscarinic acetylcholine receptors (mAChRs). The cholinergic response of NT2 astrocytes to the mAChR agonist oxotremorine was examined using the fluorescent dye fluo-4 to quantitate increases in intracellular calcium [Ca2+]i. Inhibition of this response by drugs classified as severe (dicycloverine, amitriptyline), moderate (cyclobenzaprine) and possible (cimetidine) on the Anticholinergic Cognitive Burden (ACB) scale, was examined after exposure to individual and pairs of compounds. Individually, dicycloverine had the most significant effect regarding inhibition of the astrocytic cholinergic response to oxotremorine, followed by amitriptyline then cyclobenzaprine and cimetidine, in agreement with the ACB scale. In combination, dicycloverine with cyclobenzaprine had the most significant effect, followed by dicycloverine with amitriptyline. The order of potency of the drugs in combination frequently disagreed with predicted ACB scores derived from summation of the individual drug scores, suggesting current scales may underestimate the effect of polypharmacy. Overall, this NT2.N/A model may be appropriate for further investigation of adverse anticholinergic effects of multiple medications, in order to inform clinical choices of suitable drug use in the elderly.

Bioactive sol-gel glasses at the atomic scale:the complementary use of advanced probe and computer modeling methods

Sol-gel-synthesized bioactive glasses may be formed via a hydrolysis condensation reaction, silica being introduced in the form of tetraethyl orthosilicate (TEOS), and calcium is typically added in the form of calcium nitrate. The synthesis reaction proceeds in an aqueous environment; the resultant gel is dried, before stabilization by heat treatment. These materials, being amorphous, are complex at the level of their atomic-scale structure, but their bulk properties may only be properly understood on the basis of that structural insight. Thus, a full understanding of their structure-property relationship may only be achieved through the application of a coherent suite of leading-edge experimental probes, coupled with the cogent use of advanced computer simulation methods. Using as an exemplar a calcia-silica sol-gel glass of the kind developed by Larry Hench, in the memory of whom this paper is dedicated, we illustrate the successful use of high-energy X-ray and neutron scattering (diffraction) methods, magic-angle spinning solid-state NMR, and molecular dynamics simulation as components to a powerful methodology for the study of amorphous materials.