Mechanisms of convective drying in thick beds of solids

The literature on heat and mass transfer mechanisms in the convective drying of thick beds of solids has been critically reviewed. Related mathematical models of heat transfer are also considered. Experimental and theoretical studies were made of the temperature distribution within beds, and of drying rates, with various materials undergoing convective drying. The experimental work covered thick beds of hygroscopic and non-hygroscopic materials (glass beads of different diameters, polystyrene pellets, activated alumina and wood powder) at air temperatures of 54°C to 84°C. Tests were carried out in a laboratory drying apparatus comprising a wind tunnel through which the air, of controlled temperature and humidity, was passed over a sample suspended from a balance. Thermocouples were inserted at different depths within the sample bed. The temperature distribution profiles for both hygroscopic and non-hygroscopic beds exhibited a clear difference between the temperatures at the surface and bottom during the constant rate period. An effective method was introduced for predicting the critical moisture content. During the falling rate the profiles showed the existence of a receding evaporation plane; this divided the system into a hotter dry zone in the upper section and a wet zone near the bottom. A graphical procedure was established to predict accurately the position of the receding evaporation front at any time. A new mathematical model, based on the receding evaporation front phenomenon, was proposed to predict temperature distributions throughout a bed during drying. Good agreement was obtained when the model was validated by comparing its predictions with experimental data. The model was also able to predict the duration of each drying stage. In experiments using sample trays of different diameters, the drying rate was found to increase with a decrease in the effective length of the bed surface. During the constant rate period with trays of a small effective length, i.e. less than 0.08 m, an 'inversion' in temperature distribution occurred in the bed; the bottom temperature increased and became greater than that of the surface. Experimental measurements were verified in several ways to ensure this phenomenon was real. Theoretical explanations are given for both the effective length and temperature inversion phenomena.

Accessing networked services : a user interface design problem

This research investigates the general user interface problems in using networked services. Some of the problems are: users have to recall machine names and procedures to. invoke networked services; interactions with some of the services are by means of menu-based interfaces which are quite cumbersome to use; inconsistencies exist between the interfaces for different services because they were developed independently. These problems have to be removed so that users can use the services effectively. A prototype system has been developed to help users interact with networked services. This consists of software which gives the user an easy and consistent interface with the various services. The prototype is based on a graphical user interface and it includes the following appJications: Bath Information & Data Services; electronic mail; file editor. The prototype incorporates an online help facility to assist users using the system. The prototype can be divided into two parts: the user interface part that manages interactlon with the user; the communicatIon part that enables the communication with networked services to take place. The implementation is carried out using an object-oriented approach where both the user interface part and communication part are objects. The essential characteristics of object-orientation, - abstraction, encapsulation, inheritance and polymorphism - can all contribute to the better design and implementation of the prototype. The Smalltalk Model-View-Controller (MVC) methodology has been the framework for the construction of the prototype user interface. The purpose of the development was to study the effectiveness of users interaction to networked services. Having completed the prototype, tests users were requested to use the system to evaluate its effectiveness. The evaluation of the prototype is based on observation, i.e. observing the way users use the system and the opinion rating given by the users. Recommendations to improve further the prototype are given based on the results of the evaluation. based on the results of the evah:1ation. . .'. " "', ':::' ,n,<~;'.'

An empirical investigation of the effect of rights issue announcements on share returns and the determinants of abnormal returns on the Kuala Lumpur Stock Exchange

This thesis examines the effect of rights issue announcements on stock prices by companies listed on the Kuala Lumpur Stock Exchange (KLSE) between 1987 to 1996. The emphasis is to report whether the KLSE is semi strongly efficient with respect to the announcement of rights issues and to check whether the implications of corporate finance theories on the effect of an event can be supported in the context of an emerging market. Once the effect is established, potential determinants of abnormal returns identified by previous empirical work and corporate financial theory are analysed. By examining 70 companies making clean rights issue announcements, this thesis will hopefully shed light on some important issues in long term corporate financing. Event study analysis is used to check on the efficiency of the Malaysian stock market; while cross-sectional regression analysis is executed to identify possible explanators of the rights issue announcements' effect. To ensure the results presented are not contaminated, econometric and statistical issues raised in both analyses have been taken into account. Given the small amount of empirical research conducted in this part of the world, the results of this study will hopefully be of use to investors, security analysts, corporate financial managements, regulators and policy makers as well as those who are interested in capital market based research of an emerging market. It is found that the Malaysian stock market is not semi strongly efficient since there exists a persistent non-zero abnormal return. This finding is not consistent with the hypothesis that security returns adjust rapidly to reflect new information. It may be possible that the result is influenced by the sample, consisting mainly of below average size companies which tend to be thinly traded. Nevertheless, these issues have been addressed. Another important issue which has emerged from the study is that there is some evidence to suggest that insider trading activity existed in this market. In addition to these findings, when the rights issue announcements' effect is compared to the implications of corporate finance theories in predicting the sign of abnormal returns, the signalling model, asymmetric information model, perfect substitution hypothesis and Scholes' information hypothesis cannot be supported.

An extensive laboratory investigation of the use of bio-oil modified bitumen in road construction

Several roads in Iceland with bio-oil modified surface dressings exhibited severe distresses such as bleeding, binder drain down, and eventually as surface dressing sticking to tires. Samples from six road sections were evaluated in the laboratory to determine the causes of the failure. Binders with and without bio-oil, rapeseed oil and fish oil, were evaluated through a comprehensive rheological and chemical characterization. Both oils, exhibited solubility issues with the bitumen; consequently, the oils covered the aggregates, preventing bonding between binder and stones. It appears that fish oil worked a little better than rapeseed oil for binder modification.

Unique reporter-based sensor platforms to monitor signalling in cells

Introduction - In recent years much progress has been made in the development of tools for systems biology to study the levels of mRNA and protein, and their interactions within cells. However, few multiplexed methodologies are available to study cell signalling directly at the transcription factor level. Methods - Here we describe a sensitive, plasmid-based RNA reporter methodology to study transcription factor activation in mammalian cells, and apply this technology to profiling 60 transcription factors in parallel. The methodology uses two robust and easily accessible detection platforms; quantitative real-time PCR for quantitative analysis and DNA microarrays for parallel, higher throughput analysis. Findings - We test the specificity of the detection platforms with ten inducers and independently validate the transcription factor activation. Conclusions - We report a methodology for the multiplexed study of transcription factor activation in mammalian cells that is direct and not theoretically limited by the number of available reporters.

Chemical specificity in REDOX-responsive materials:the diverse effects of different Reactive Oxygen Species (ROS) on polysulfide nanoparticles

REDOX responsive (nano)materials typically exhibit chemical changes in response to the presence and concentration of oxidants/reductants. Due to the complexity of biological environments, it is critical to ascertain whether the chemical response may depend on the chemical details of the stimulus, in addition to its REDOX potential, and whether chemically different responses can determine a different overall performance of the material. Here, we have used oxidation-sensitive materials, although these considerations can be extended also to reducible ones. In particular, we have used poly(propylene sulfide) (PPS) nanoparticles coated with a PEGylated emulsifier (Pluronic F127); inter alia, we here present also an improved preparative method. The nanoparticles were exposed to two Reactive Oxygen Species (ROS) typically encountered in inflammatory reactions, hydrogen peroxide (H2O2) and hypochlorite (ClO−); their response was evaluated with a variety of techniques, including diffusion NMR spectroscopy that allowed to separately characterize the chemically different colloidal species produced. The two oxidants triggered a different chemical response: H2O2 converted sulfides to sulfoxides, while ClO− partially oxidized them further to sulfones. The different chemistry correlated to a different material response: H2O2 increased the polarity of the nanoparticles, causing them to swell in water and to release the surface PEGylated emulsifier; the uncoated oxidized particles still exhibited very low toxicity. On the contrary, ClO− rapidly converted the nanoparticles into water-soluble, depolymerized fragments with a significantly higher toxicity. The take-home message is that it is more correct to discuss ‘smart’ materials in terms of an environmentally specific response to (REDOX) stimuli. Far from being a problem, this could open the way to more sophisticated and precisely targeted applications.

A stage-oriented model (SOM) for e-commerce adoption:a study of Saudi Arabian organisations

Purpose - The purpose of this paper is to construct a new e-commerce innovation and adoption model that takes into account various stages of e-commerce adoption (interactive, non-interactive and stabilised) and covers technological, organisational and environmental factors. This was tested using data collected from manufacturing and service companies in Saudi Arabia (SA) to reveal inhibitors and catalysts for e-commerce adoption. Design/methodology/approach - This study uses new data from surveys from 202 companies and then uses exploratory factor analysis and structural equation modelling for analyses. Findings - This study shows that the new stage-oriented model (SOM) is valid and can reveal specific detailed nuances of e-commerce adoption within a particular setting. Surprising results show that SA is not so very different to developed western countries in respect to e-commerce adoption. However there are some important differences which are discussed in detail. Research limitations/implications - A new SOM for e-commerce adoption is provided which may be used by other IS adoption researchers. Practical implications - Managers responsible for the adoption of e-commerce in SA, the Middle East and beyond can learn from these findings to speed up adoption rates and make e-commerce more effective. Social implications - This work may help spread e-commerce use throughout SA, the Middle East and to other developing nations. Originality/value - The results add to the extremely limited number of empirical studies that has been conducted to investigate e-commerce adoption in the context of Arabic countries.

An investigation into the factors affecting e-commerce adoption decisions by SMEs:a study in Saudi Arabia

Electronic commerce (e-commerce) has become an increasingly important initiative among Small and Medium Enterprises (SMEs) as both a great opportunity and as a source of competition. The factors affecting adoption decisions of e-commerce by SMEs have been well documented, but there is a paucity of empirical studies that examine the adoption of e-commerce in the Arab world. The aim of this chapter is to provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian businesses. This chapter investigates the state of e-commerce adoption and analyses the factors that determine the extent to which SMEs in Saudi Arabia are inclined towards deploying e-commerce technologies. This research was designed using a qualitative approach through exploratory case studies selected from firms in Saudi Arabia. The findings contribute towards a better conceptual and practical understanding of the main factors driving SMEs to adopt e-commerce. The study has found that the level of e-commerce implementation has yet to mature and customer readiness for Internet shopping has to improve before e-commerce reaches the levels of maturity seen in other regions of the world. This study highlights several directions for future inquiry and implications for policymakers and managers who are involved in efforts to introduce complex innovations such as e-commerce into their organisations or are interested in expanding their e-commerce applications and generating more revenue.

An investigation into the adoption of electronic commerce among Saudi Arabian SMEs

Despite the proliferation of e-commerce adoption by SMEs and the world-wide growth of e-commerce, in general there is a paucity of empirical studies that examine the adoption of e-commerce by SMEs in the Middle East. In this paper, the authors provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian SMEs. This research was designed using a qualitative approach through in-depth case studies selected from firms in Saudi Arabia. The findings contribute toward a better conceptual and practical understanding of the main factors driving SMEs to adopt e-commerce. The authors find that the level of e-commerce implementation has yet to mature and customer readiness for Internet shopping must improve before e-commerce reaches the levels of maturity seen in other regions of the world. This study highlights directions for future inquiry and implications for information and technology managers and policymakers in developing Arab nations.