Development of science and technology policy for Kuwait

The status of Science and Technology in KUWAIT has been analysed in order to assess the extent of the application of Science and Technology needed for the Country's development. The design and implementation of a Science and Technology Policy has been examined to identify the appropriate technology necessary to improve KUWAIT's socio-economic-industrial structures. Following a general and critical review of the role of Science and Technology in the developing countries, the author has reviewed the past and contemporary employment of Science and Technology for development.of various sectors and the existence, if any, of any form (explicit, implicit, or both) of a Science and Technology Policy in KUWAIT. The thesis is structured to evaluate almost all of the sectors in KUWAIT which utilise Science and/or Technology, the effectiveness of such practices, their policymaking process, the channels by which policies were transformed into sources of influence through Governmental action and the impact that various policy instruments at the disposal of the the Government had on the development of S & T capabilities. The author has studied the implications of the absence of a Science and Technology Policy in Kuwait by examining some specific case studies, eg, the absence of a Technology Assessment Process and the negative impacts resulting from this; the ad-hoc allocation of the research and development budget instead of its being based on a percentage of GNP; the limitations imposed on the development of indigenous contracting companies and consultancy and engineering design offices; the impacts of the absence of Technology Transfer Centre, and so forth. As a consequence of the implications of the above studies, together with the negative results from the absence of an explicit Science and Technology Policy, eg, research and development activities do not relate to the national development plans, the author suggests that a Science and Technology Policy-Making Body should be established to formulate, develop, monitor and correlate the Science and Technology Activities in KUWAIT.

Legibility, privacy and creativity:linked data in a surveillance society

This paper looks at the issue of privacy and anonymity through the prism of Scott's concept of legibility i.e. the desire of the state to obtain an ever more accurate mapping of its domain and the actors in its domain. We argue that privacy was absent in village life in the past, and it has arisen as a temporary phenomenon arising from the lack of appropriate technology to make all life in the city legible. Cities have been the loci of creativity for the major part of human civilisation. There is something specific about the illegibility of cities which facilitates creativity and innovation. By providing the technology to catalogue and classify all objects and ideas around us, this leads to a consideration of semantic web technologies, Linked Data and the Internet of Things as unwittingly furthering this ever greater legibility. There is a danger that the over description of a domain will lead to a loss in creativity and innovation. We conclude by arguing that our prime concern must be to preserve illegibility because the survival of some form, any form, of civilisation depends upon it.

Integrating technology and operations in a developing country context

The importance of technology to developing countries is widely recognised as they compete internationally and develop internally. Firms acquire technology by different means and from diverse sources, and they possess varying levels of competence. Since countries are at various stages of economic and technological development, prescriptive approaches to technology and operations integration are not appropriate. The paper discusses factors in the literature that affect the integration of technology and operations in developing countries. Country similarities and differences also play a role, so the study examines three developing countries: Brazil, India and South Africa. These countries are emerging from periods of regulation and have developed certain sectors of their economies. Empirical evidence is provided from a study of managers in South Africa who were asked to assess the important factors in technology integration, and to score the extent to which they can control these. Results from the study concur with the literature regarding the importance of a country’s political stability and its policies towards new investment and infrastructure. Knowledge and understanding of technology are essential for successful integration in countries with insufficient skilled personnel, and where education levels are low.

Managerial perceptions of factors influencing technology management in South Africa

A challenge for developing countries is to become part of the global economy. Their economic well being is dependent on their ability to attain the levels of technological development which could make them globally competitive. Infrastructural and educational problems pose immediate barriers which should be addressed as these countries embark on projects to enhance their technological base. The technology selected should be appropriate for the country's level of development and expertise. The implementation of that technology will place a new set of demands on managers and workers. This paper describes an investigation of perceptions of technology management in South Africa, a country which is developed in certain areas, but which remains desperately poor in other respects. South Africa's politics and history have always confronted managers with unique demands. The paper examines the perceptions of 132 South African managers regarding technology management by studying the relationship between the importance of different factors in managing new technology, and the extent to which a manager can control them. An importance-control grid framework is used to isolate individual parameters and to assess these in relation to the complexity of a manager's environment. The research highlights imbalances between importance and control, and suggests reasons therefor. Some broader implications for managers are also discussed. © 2002 Elsevier Science Ltd. All rights reserved.

The importance of clusters for spillovers from foreign direct investment and technology sourcing

This paper examines the link between cluster development and inward foreign direct investment. The conventional policy approach has been to assume that inward foreign direct investment (FDI) can stimulate significant clustering activity, thus generating significant spillovers. This paper, however, questions this and shows that, while clusters can generate significant productivity spillovers from FDI, this only occurs in pre-existing clusters. Further, the paper demonstrates that foreign-owned firms that enter clusters also appropriate spillovers when domestic firms undertake investment, raising the possibility that clusters are important locations for so called technology, or knowledge sourcing activities by MNEs. © 2006 Oxford University Press.

Who gains from whom? Spillovers, competition and technology sourcing in the foreign-owned sector of UK manufacturing

There is a growing literature explaining foreign direct investment flows in terms of 'technology sourcing', whereby multinational firms invest in certain locations not to exploit their firm-specific assets in the host environment, but to access technology that is generated by host country firms. However, it is far from clear whether the literature has found significant evidence of such activity beyond a few isolated examples. This paper extends this work by allowing for the possibility of multinational enterprises (MNEs) sourcing technology not only from host country firms but also from each other within a host economy. The paper demonstrates that MNEs in the UK do indeed appropriate spillovers both from indigenous firms and from other foreign investors, but that there are also significant competition effects that act to reduce productivity in certain industries. The paper also explores which countries' affiliates gain most from technology sourcing in the UK, and which generate the greatest spillovers within the foreign-owned sector. © Scottish Economic Society 2005.

Valuing transferred machine tool technology:Relating value to product attributes and preferences of acquirers

The value of technology and the appropriate form of transfer arrangement are important questions to be resolved when transferring technology between Western manufacturing firms and partners in industrialising and developing countries. This article reports on surveys carried out in the machine tool industries in the UK and China to establish the differences and similarities between owners and acquirers of technology regarding the relative importance of the factors they evaluate, and the assessments they make, when considering a technology transfer. It also outlines the development of a framework for technology valuation. The survey results indicate that the value of product technology is related to superior technical performance, especially on reliability and functionality, and the prospects of premium prices and increased sales of the technology transfer based machine tools. Access to markets is the main objective of UK companies, while Chinese companies are concerned about improving their technological capability. There are significant risks, especially related to performance in the market, and while owners and acquirers have benefited in the short term, the long term collaboration required for strategic benefits has been difficult to achieve because of the different priorities of the owners and the acquirers.

A conceptual analysis of m-technology as a medium towards e-governance society in emerging countries

This paper shows how mobile phone technology can influence the development of egovernance in emerging countries. We evaluate the conditions under which consumers really engage with m-services. We argue that the lower cost of m-infrastructure is more appropriate than the Internet-based structure that prevents large part of the population access to ICT. However, m-technology should not be separated from the Internet but be integrated allowing emerging country to leap frog the technological cycle.

Product innovation in a new technology based firm

This thesis examines the "state of the art" of product innovation in new technology In the UK. The roles in innovation attributed to small and large firms are examined. Growing attention is being focused upon the small firm sector as a seedbed for Innovation and government policy has been changing to encourage the entrepreneurial new technology based firm (NTBF). The novel perspective of this research results from working in such a firm. It provides a longitudinal study of the management of innovation in conjunction with the corporate strategy of the firm. Given that the researcher was a participant and observer in the firm studied, the research is akin to action research in methodology but is better described as grounded theory. Theoretical concepts are drawn from the prescriptive literature describing corporate strategy, and from the empirical literature which has evaluated new product success and failure. Models of the Innovation process are discussed and appropriate strategies and reasons for product innovation failure in NTBFs are described. The strategy, structure and new product development progress of the company are examined, using both the researcher's observations and company documents. This provides information on the methods and practices adopted for product innovation in a NTBF. The thesis analyses the performance of the firm In terms of product innovation. The models and strategies derived from the literature are then tested in the light of the experience of the company. Conclusions are drawn regarding strategies for innovation in NTBFs and about the innovation process in general. The importance of a NTBF adopting a synergistic strategy is shown. Links are established between the existence of synergy in the strategy and coupling in the management of innovation. Innovation is shown to be a laterally interdisciplinary exercise and therefore the "pipeline model" Is criticised. Finally a set of guidelines Is produced for the managers of NTBFs.

The development of an expert system for the identification anodic coating process defects as a contribution to the dissemination of anodizing technology

Initially this thesis examines the various mechanisms by which technology is acquired within anodizing plants. In so doing the history of the evolution of anodizing technology is recorded, with particular reference to the growth of major markets and to the contribution of the marketing efforts of the aluminium industry. The business economics of various types of anodizing plants are analyzed. Consideration is also given to the impact of developments in anodizing technology on production economics and market growth. The economic costs associated with work rejected for process defects are considered. Recent changes in the industry have created conditions whereby information technology has a potentially important role to play in retaining existing knowledge. One such contribution is exemplified by the expert system which has been developed for the identification of anodizing process defects. Instead of using a "rule-based" expert system, a commercial neural networks program has been adapted for the task. The advantages of neural networks over 'rule-based' systems is that they are better suited to production problems, since the actual conditions prevailing when the defect was produced are often not known with certainty. In using the expert system, the user first identifies the process stage at which the defect probably occurred and is then directed to a file enabling the actual defects to be identified. After making this identification, the user can consult a database which gives a more detailed description of the defect, advises on remedial action and provides a bibliography of papers relating to the defect. The database uses a proprietary hypertext program, which also provides rapid cross-referencing to similar types of defect. Additionally, a graphics file can be accessed which (where appropriate) will display a graphic of the defect on screen. A total of 117 defects are included, together with 221 literature references, supplemented by 48 cross-reference hyperlinks. The main text of the thesis contains 179 literature references. (DX186565)

Integrated assessment of bioelectricity technology options

Power generation from biomass is a sustainable energy technology which can contribute to substantial reductions in greenhouse gas emissions, but with greater potential for environmental, economic and social impacts than most other renewable energy technologies. It is important therefore in assessing bioenergy systems to take account of not only technical, but also environmental, economic and social parameters on a common basis. This work addresses the challenge of analysing, quantifying and comparing these factors for bioenergy power generation systems. A life-cycle approach is used to analyse the technical, environmental, economic and social impacts of entire bioelectricity systems, with a number of life-cycle indicators as outputs to facilitate cross-comparison. The results show that similar greenhouse gas savings are achieved with the wide variety of technologies and scales studied, but land-use efficiency of greenhouse gas savings and specific airborne emissions varied substantially. Also, while specific investment costs and electricity costs vary substantially from one system to another the number of jobs created per unit of electricity delivered remains roughly constant. Recorded views of stakeholders illustrate that diverging priorities exist for different stakeholder groups and this will influence appropriate choice of bioenergy systems for different applications.

Block copolymer strategies for solar cell technology

A simple overview of the methods used and the expected benefits of block copolymers in organic photovoltaic devices is given in this review. The description of the photovoltaic process makes it clear how the detailed self-assembly properties of block copolymers can be exploited. Organic photovoltaic technology, an inexpensive, clean and renewable energy source, is an extremely promising option for replacing fossil fuels. It is expected to deliver printable devices processed on flexible substrates using high-volume techniques. Such devices, however, currently lack the long-term stability and efficiency to allow organic photovoltaics to surpass current technologies. Block copolymers are envisaged to help overcome these obstacles because of their long term structural stability and their solid-state morphology being of the appropriate dimensions to efficiently perform charge collection and transfer to electrodes.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Technology adoption in small and medium-sized logistics providers

Purpose - The main aim of the research is to shed light on the role of information and communication technology (ICT) in the logistics innovation process of small and medium-sized third party logistics providers (3PLs). Design/methodology/approach - A triangulated research strategy was designed using a combination of quantitative and qualitative methods. The former involved the use of a questionnaire survey of small and medium-sized Italian 3PLs with 153 usable responses received. The latter comprised a series of focus groups and the use of seven case studies. Findings - There is a relatively low level of ICT expenditure with few companies adopting formal technology investment strategies. The findings highlight the strategic importance of supply chain integration for 3PLs with companies that have embarked on an expansion of their service portfolios showing a higher level of both ICT usage and information integration. Lack of technology skills in the workforce is a major constraint on ICT adoption. Given the proliferation of logistics-related ICT tools and applications in recent years it has been difficult for small and medium-sized 3PLs to select appropriate applications. Research limitations/implications - The paper provides practical guidelines to researchers in the effective use of mixed-methods research based on the concept of methodological triangulation. In particular, it shows how questionnaire surveys, focus groups and case study analysis can be used in combination to provide insights into multi-faceted supply chain phenomena. It also identifies several potentially fruitful avenues for future research in this specific field. Practical implications - The paper's findings provide useful guidance for practitioners on the effective adoption of ICT as part of the logistics innovation process. The findings also provide support for ICT vendors in the design of ICT solutions that are aligned to the needs of small 3PLs. Originality/value - There is currently a paucity of research into the drivers and inhibitors of ICT in the innovation processes of small and medium-sized 3PLs. This paper fills this gap by exploring the issue using a range of complementary research approaches. Copyright © 2013 Emerald Group Publishing Limited. All rights reserved.

Technology enhanced learning in Higher Education

Technology-Enhanced Learning in Higher Education is an anthology produced by the international association, Learning in Higher Education (LiHE). LiHE, whose scope includes the activities of colleges, universities and other institutions of higher education, has been one of the leading organisations supporting a shift in the education process from a transmission-based philosophy to a student-centred, learning-based approach. Traditionally education has been envisaged as a process in which the teacher disseminates knowledge and information to the student, and directs them to perform – instructing, cajoling, encouraging them as appropriate – despite different students’ abilities. Yet higher education is currently experiencing rapid transformation, with the introduction of a broad range of technologies which have the potential to enhance student learning. This anthology draws upon the experiences of those practitioners who have been pioneering new applications of technology in higher education, highlighting not only the technologies themselves but also the impact which they have had on student learning. The anthology illustrates how new technologies – which are increasingly well-known and accepted by today’s ‘digital natives’ undertaking higher education – can be adopted and incorporated. One key conclusion is that learning remains a social process even in technology-enhanced learning contexts. So the technology-based proxies we construct need to retain and reflect the agency of the teacher. Technology-Enhanced Learning in Higher Education showcases some of the latest pedagogical technologies and their most creative, state-of-the-art applications to learning in higher education from around the world. Each of the chapters explores technology-enhanced learning in higher education in terms of either policy or practice. They contain detailed descriptions of approaches taken in very different curriculum areas, and demonstrate clearly that technology may and can enhance learning only if it is designed with the learning process of students at its core. So the use of technology in education is more linked to pedagogy than it is to bits and bytes.