Novel biodegradable fibres for applications in tissue engineering and drug delivery

The preparation and characterisation of novel biodegradable polymer fibres for application in tissue engineering and drug delivery are reported. Poly(e-caprolactone) (PCL) fibres were produced by wet spinning from solutions in acetone under low shear (gravity flow) conditions. The tensile strength and stiffness of as-spun fibres were highly dependent on the concentration of the spinning solution. Use of a 6% w/v solution resulted in fibres having strength and stiffness of 1.8 MPa and 0.01 GPa respectively, whereas these values increased to 9.9 MPa and 0.1 GPa when fibres were produced from 20% w/v solutions. Cold drawing to an extension of 500% resulted in further increases in fibre strength (up to 50 MPa) and stiffness (0.3 GPa). Hot drawing to 500% further increased the fibre strength (up to 81 MPa) and stiffness (0.5 GPa). The surface morphology of as-spun fibres was modified, to yield a directional grooved pattern by drying in contact with a mandrel having a machined topography characterised by a peak-peak separation of 91 mm and a peak height of 30 mm. Differential scanning calorimetery (DSC) analysis of as-spun fibres revealed the characteristic melting point of PCL at around 58°C and a % crystallinity of approximately 60%. The biocompatibility of as-spun fibres was assessed using cell culture. The number of attached 3T3 Swiss mouse fibroblasts, C2C12 mouse myoblasts and human umbilical vein endothelial cells (HUVECs) on as-spun, 500% cold drawn, and gelatin coated PCL fibres were observed. The results showed that the fibres promoted cell proliferation for 9 days in cell culture and was slightly lower than on tissue culture plastic. The morphology of all cell lines was assessed on the various PCL fibres using scanning electron microscopy. The cell function of HUVECs growing on the as-spun PCL fibres was evaluated. The ability HUVECs to induce an immune response when stimulated with lipopolysaccaride (LPS) and thereby to increase the amount of cell surface receptors was assessed by flow cytometry and reverse transcription-polymerase chain reaction (RT-PCR). The results showed that PCL fibres did not inhibit this function compared to TCP. As-spun PCL fibres were loaded with 1 % ovine albumin (OVA) powder, 1% OVA nanoparticles and 5% OVA nanoparticles by weight and the protein release was assessed in vitro. PCL fibres loaded with 1 % OVA powder released 70%, 1% OVA nanoparticle released 60% and the 5% OVA nanoparticle released 25% of their protein content over 28 days. These release figures did not alter when the fibres were subjected to lipase enzymatic degradation. The OVA released was examined for structural integrity by SDS-PAGE. This showed that the protein molecular weight was not altered after incorporation into the fibres. The bioactivity of progesterone was assessed following incorporation into PCL fibres. Results showed that the progesterone released had a pronounced effect on MCF-7 breast epithelial cells, inhibiting their proliferation. The PCL fibres display high fibre compliance, a potential for controlling the fibre surface architecture to promote contact guidance effects, favorable proliferation rate of fibroblasts, myoblasts and HUVECs and the ability to release pharmaceuticals. These properties recommended their use for 3-D scaffold production in soft tissue engineering and the fibres could also be exploited for controlled presentation and release of biopharmaceuticals such as growth factors.

Beschwerdemanagement im B2B-Sektor:Replikation und Erweiterung

Inhalt der vorliegenden Studie ist eine Replikation und Erweiterung des Modells zur Wirkung der wahrgenommenen Gerechtigkeit. Zunächst wird die Wirkung der wahrgenommenen Gerechtigkeit bei einem B2B-Dienstleister auf die Zufriedenheit sowie die Bindung der Kunden nach einer Beschwerde untersucht. Daran anschließend erfolgt eine Erweiterung des Modells um die Moderatoren Beziehungslänge und Bedeutung des Beschwerdeobjekts. Die Analyse zeigt, dass die prozedurale, interaktionale und distributive Gerechtigkeit zwar auch im B2B-Kontext die zentralen Determinanten der Beschwerdezufriedenheit darstellen, die einzelnen Dimensionen jedoch eine andere Gewichtung erfahren als in einer gemischten Stichprobe (B2B und B2C). Zudem zeigt die Erweiterung des Modells um die Moderatoren, dass auch zwischen den einzelnen B2B-Kunden Unterschiede in der Wirkung der drei Determinanten bestehen.

Representing the assessment process for psychodynamic psychotherapy within a computerized model of human classification

This research describes a computerized model of human classification which has been constructed to represent the process by which assessments are made for psychodynamic psychotherapy. The model assigns membership grades (MGs) to clients so that the most suitable ones have high values in the therapy category. Categories consist of a hierarchy of components, one of which, ego strength, is analysed in detail to demonstrate the way it has captured the psychotherapist's knowledge. The bottom of the hierarchy represents the measurable factors being assessed during an interview. A questionnaire was created to gather the identified information and was completed by the psychotherapist after each assessment. The results were fed into the computerized model, demonstrating a high correlation between the model MGs and the suitability ratings of the psychotherapist (r = .825 for 24 clients). The model has successfully identified the relevant data involved in assessment and simulated the decision-making process of the expert. Its cognitive validity enables decisions to be explained, which means that it has potential for therapist training and also for enhancing the referral process, with benefits in cost effectiveness as well as in the reduction of trauma to clients. An adapted version measuring client improvement would give quantitative evidence for the benefit of therapy, thereby supporting auditing and accountability. © 1997 The British Psychological Society.

Sensitivity and reliability of objective image analysis compared to subjective grading of bulbar hyperaemia

Aims: To establish the sensitivity and reliability of objective image analysis in direct comparison with subjective grading of bulbar hyperaemia. Methods: Images of the same eyes were captured with a range of bulbar hyperaemia caused by vasodilation. The progression was recorded and 45 images extracted. The images were objectively analysed on 14 occasions using previously validated edge-detection and colour-extraction techniques. They were also graded by 14 eye-care practitioners (ECPs) and 14 non-clinicians (NCb) using the Efron scale. Six ECPs repeated the grading on three separate occasions Results: Subjective grading was only able to differentiate images with differences in grade of 0.70-1.03 Efron units (sensitivity of 0.30-0.53), compared to 0,02-0.09 Efron units with objective techniques (sensitivity of 0.94-0.99). Significant differences were found between ECPs and individual repeats were also inconsistent (p<0.001). Objective analysis was 16x more reliable than subjective analysis. The NCLs used wider ranges of the scale but were more variable than ECPs, implying that training may have an effect on grading. Conclusions: Objective analysis may offer a new gold standard in anterior ocular examination, and should be developed further as a clinical research tool to allow more highly powered analysis, and to enhance the clinical monitoring of anterior eye disease.

Long-term drivers of broadband traffic in next-generation networks

This paper is concerned with long-term (20+ years) forecasting of broadband traffic in next-generation networks. Such long-term approach requires going beyond extrapolations of past traffic data while facing high uncertainty in predicting the future developments and facing the fact that, in 20 years, the current network technologies and architectures will be obsolete. Thus, "order of magnitude" upper bounds of upstream and downstream traffic are deemed to be good enough to facilitate such long-term forecasting. These bounds can be obtained by evaluating the limits of human sighting and assuming that these limits will be achieved by future services or, alternatively, by considering the contents transferred by bandwidth-demanding applications such as those using embedded interactive 3D video streaming. The traffic upper bounds are a good indication of the peak values and, subsequently, also of the future network capacity demands. Furthermore, the main drivers of traffic growth including multimedia as well as non-multimedia applications are identified. New disruptive applications and services are explored that can make good use of the large bandwidth provided by next-generation networks. The results can be used to identify monetization opportunities of future services and to map potential revenues for network operators. © 2014 The Author(s).

A new paradigm in large-scale assembly-research priorities in measurement assisted assembly

This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.

From 'Plodder' to 'Creative':feedback in teacher education

This article discusses the case study of four student teachers, examining the ways in which a particular kind of feedback—namely, confirmatory feedback—can act as a catalyst for some of the learning and potential change student teachers in a teaching practice group may experience on an initial teacher education programme. It illustrates how one piece of confirmatory feedback given to the student teacher, Jake, during post-observation feedback sessions has been influential not just for him but also for his peers. The article shows how this kind of feedback can be particularly effective when it is specific and detailed. It also exemplifies confirmatory feedback and considers the implications of such feedback for the field of teacher education.

Anticholinergic burden in older adults with intellectual disability; relationships with multimorbidity and adverse effects

Background: Anticholinergic medications may be associated with adverse clinical outcomes, including acute impairments in cognition and anticholinergic side effects, the risk of adverse outcomes increasing with increasing anticholinergic exposure. Older people with intellectual disability may be at increased risk of exposure to anticholinergic medicines due to their higher prevalence of comorbidities. We sought to determine anticholinergic burden in ageing people with intellectual disability. Methods: Medication data (self-report/proxy-report) was drawn from Wave 1 of the Intellectual Disability Supplement to the Irish Longitudinal Study on Ageing (IDS-TILDA), a study on the ageing of 753nationally representative people with an IDC40 years randomly selected from the National Intellectual Disability Database. Each individual’s cumulative exposure to anticholinergic medications was calculated using the Anticholinergic Cognitive Burden Scale (ACB) amended by a multi-disciplinary group with independent advice to account for the range of medicines in use in this population. Results: Overall, 70.1 % (527) reported taking medications with possible or definite anticholinergic properties (ACBC1), with a mean (±SD) ACB score of 4.5 (±3.0) (maximum 16). Of those reporting anticholinergic exposure (n=527), 41.3 % (217) reported an ACB score o fC5. Antipsychotics accounted for 36.4 % of the total cumulative ACB score followed by anticholinergics (16 %) and antidepressants (10.8 %). The most frequently reported medicine with anticholinergic activity was carbamazepine 16.8 % (127). The most frequently reported medicine with high anticholinergic activity (ACB 3) was olanzapine13.4 % (101). There was a significant association between higher anti-cholinergic exposure and multimorbidity, particularly mental health morbidity, and some anticholinergic adverse effects such as constipation and day-time drowsiness but not self-rated health. Conclusion: Using simple cumulative measures proved an effective means to capture total burden and helped establish that anticholinergic exposure in the study population was high. The finding highlights the need for comprehensive reviews of medications.