Monitoring of deployment process of shape memory polymers for morphing structures with embedded fibre Bragg grating sensors

This article demonstrates the use of embedded fibre Bragg gratings as vector bending sensor to monitor two-dimensional shape deformation of a shape memory polymer plate. The shape memory polymer plate was made by using thermal-responsive epoxy-based shape memory polymer materials, and the two fibre Bragg grating sensors were orthogonally embedded, one on the top and the other on the bottom layer of the plate, in order to measure the strain distribution in both longitudinal and transverse directions separately and also with temperature reference. When the shape memory polymer plate was bent at different angles, the Bragg wavelengths of the embedded fibre Bragg gratings showed a red-shift of 50 pm/°caused by the bent-induced tensile strain on the plate surface. The finite element method was used to analyse the stress distribution for the whole shape recovery process. The strain transfer rate between the shape memory polymer and optical fibre was also calculated from the finite element method and determined by experimental results, which was around 0.25. During the experiment, the embedded fibre Bragg gratings showed very high temperature sensitivity due to the high thermal expansion coefficient of the shape memory polymer, which was around 108.24 pm/°C below the glass transition temperature (Tg) and 47.29 pm/°C above Tg. Therefore, the orthogonal arrangement of the two fibre Bragg grating sensors could provide a temperature compensation function, as one of the fibre Bragg gratings only measures the temperature while the other is subjected to the directional deformation. © The Author(s) 2013.

Investigation of the neural correlates of recognition memory using magnetoencephalography

Neuroimaging literature has identified several regions involved in encoding and recognition processes. A review of the literature illustrated considerable variations in the precise location and mechanisms of these processes, and it was these variations that were investigated in the studies in this thesis. Magnetoencephalography (MEG) was used as the neuroimaging tool and a preliminary study identified Synthetic Aperture Magnetometry (SAM) and not a traditional dipole fitting technique, as an appropriate tool for identifying the multiple cortical regions involved in recognition memory. It has been suggested that there is hemispheric asymmetry in encoding and recognition processes. There are two main hypotheses: the first suggesting that there is task-specificity, the second that this specificity is determined by stimulus modality. A series of experiments was completed with two main aims: first to produce consistent and complementary recognition memory data with MEG, and second to determine whether there exists any hemispheric asymmetry in recognition memory. The results obtained from five experiments demonstrated activation of prefrontal and middle temporal structures, which were consistent with those reported in previous neuroimaging studies. It was suggested that this diverse activation may be explained by the involvement of a semantic network during recognition memory processes. In support of this, a subsequent study involving a semantic encoding task demonstrated that category-specific differences in cortical activation also existed in the recognition memory phase. Controlling for the involvement of such semantic processes produced predominantly bilateral activation. It was suggested that the apparent hemispheric asymmetry findings reported in the literature may be due to the 'coarse' temporal analysis available with earlier imaging techniques, which over-simplified the networks reported by being unable to recognise the early complex processes associated with semantic processing which these MEG studies were able to identify. The importance of frequency-specific activations, specifically theta synchronisation and alpha desynchronisation, in memory processes was also investigated.