Reflecting on time, timing and timeliness in public sector supply networks

Despite recent research on time (e.g. Hedaa & Törnroos, 2001), consideration of the time dimension in data collection, analysis and interpretation in research in supply networks is, to date, still limited. Drawing on a body of literature from organization studies, and empirical findings from a six-year action research programme and a related study of network learning, we reflect on time, timing and timeliness in interorganizational networks. The empirical setting is supply networks in the English health sector wherein we identify and elaborate various issues of time, within the case and in terms of research process. Our analysis is wide-ranging and multi-level, from the global (e.g. identifying the notion of life cycles) to the particular (e.g. different cycle times in supply, such as daily for deliveries and yearly for contracts). We discuss the ‘speeding up’ of inter-organizational ‘e’ time and tensions with other time demands. In closing the paper, we relate our conclusions to the future conduct of the research programme and supply research more generally, and to the practice of managing supply (in) networks.

Nonlinearity management in fiber transmission systems with hybrid amplification

Nonlinearity management in transmission lines with periodic dispersion compensation and hybrid Raman-Erbium doped fiber amplification is studied both analytically and numerically. Different transmission/compensating fiber pairs are considered, with particular focus on the SMF/DCF case. © 2004 Elsevier B.V. All rights reserved.

Nonlinearity management in hybrid amplification systems

A theory of nonlinearity management in transmission lines with periodic dispersion compensation and hybrid Raman-EDFA amplification is developed. Different transmission/compensating fiber pairs performances are compared and the optimal amplification scheme determined for each case.

A review of current knowledge on Electronic Vision Enhancement Systems for the visually impaired

Magnification can be provided to assist those with visual impairment to make the best use of remaining vision. Electronic transverse magnification of an object was first conceived for use in low vision in the late 1950s, but has developed slowly and is not extensively prescribed because of its relatively high cost and lack of portability. Electronic devices providing transverse magnification have been termed closed-circuit televisions (CCTVs) because of the direct cable link between the camera imaging system and monitor viewing system, but this description generally refers to surveillance devices and does not indicate the provision of features such as magnification and contrast enhancement. Therefore, the term Electronic Vision Enhancement Systems (EVES) is proposed to better distinguish and describe such devices. This paper reviews current knowledge on EVES for the visually impaired in terms of: classification; hardware and software (development of technology, magnification and field-of-view, contrast and image enhancement); user aspects (users and usage, reading speed and duration, and training); and potential future development of EVES. © 2003 The College of Optometrists.

Performance management of event processing systems

This thesis is a study of performance management of Complex Event Processing (CEP) systems. Since CEP systems have distinct characteristics from other well-studied computer systems such as batch and online transaction processing systems and database-centric applications, these characteristics introduce new challenges and opportunities to the performance management for CEP systems. Methodologies used in benchmarking CEP systems in many performance studies focus on scaling the load injection, but not considering the impact of the functional capabilities of CEP systems. This thesis proposes the approach of evaluating the performance of CEP engines’ functional behaviours on events and develops a benchmark platform for CEP systems: CEPBen. The CEPBen benchmark platform is developed to explore the fundamental functional performance of event processing systems: filtering, transformation and event pattern detection. It is also designed to provide a flexible environment for exploring new metrics and influential factors for CEP systems and evaluating the performance of CEP systems. Studies on factors and new metrics are carried out using the CEPBen benchmark platform on Esper. Different measurement points of response time in performance management of CEP systems are discussed and response time of targeted event is proposed to be used as a metric for quality of service evaluation combining with the traditional response time in CEP systems. Maximum query load as a capacity indicator regarding to the complexity of queries and number of live objects in memory as a performance indicator regarding to the memory management are proposed in performance management of CEP systems. Query depth is studied as a performance factor that influences CEP system performance.

An actor-network theory study of public sector inter-organisational collaboration

EMBARGOED The literature on inter-organisational collaboration, although wide-ranging, offers little guidance on collaboration as process. It focuses in the main on human attributes like leadership, trust and agency, but gives little consideration to the role of objects in the development of inter-organisational collaborations. A central aim of this thesis is to understand the interaction of objects and humans in the development of a particular health and social care partnership in the North East of England. This socio-material perspective was achieved through actor-network theory (ANT) as a methodology, in which the researcher is equally sensitised to the role of human and non-human entities in the development of a network. The case study is that of the North East Lincolnshire Care Trust Plus (CTP). This was a unique health and social care collaboration arrangement between North East Lincolnshire Council and North East Lincolnshire Primary Care Trust, setup to address heath inequalities in the region. The CTP was conceived and developed at a local level by the respective organisation’s decision makers in the face of considerable opposition from regional policy makers and national regulators. However, despite this opposition, the directors eventually achieved their goal and the CTP became operational on 1st September 2007. This study seeks to understand how the CTP was conceived and developed, in the face of this opposition. The thesis makes a number of original contributions. Firstly, it adds to the current body of literature on collaboration by identifying how objects can help problematize issues and cement inter-organisational collaborations. Secondly it provides a novel account describing how two public sector organisations created a unique collaboration, despite pressing resistance from the regulatory authorities; and thirdly it extends Callon’s (1996) notion of problematization to examine how, what is rather vaguely described as ‘context’ in the literature, becomes enmeshed in decisions to collaborate. UNTIL 03/02/2016 THIS THESIS IS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.

Country strategic risk and knowledge management:a proposed framework for improvement

The world is in a period of reflection about social and economic models. In particular there is a review of the capacities that countries have for improving their competitiveness. The experiences in a society are part of the process of learning and knowledge development in that society: especially in the development of communities. Risks appear continually in the process of the search for, analysis and implementation of solutions to problems. This paper discusses the issues related to the improvement of productivity and knowledge in a society, the risk that poor or even declining productivity brings to the communities and the need to develop people that support the decision making process in communities.The approach to improve the communities' development is through the design of a research programme in knowledge management based on distance learning. The research programme implementation is designed to provide value added to the decisions in communities in order to use collective intelligence, solve collective problems and to achieve goals that support local solutions. This program is organized and focused on four intelligence areas, artificial, collective, sentient and strategic. These areas are productivity related and seek to reduce the risk of lack of competitiveness through formal and integrated problem analysis. In a country such as Colombia, where different regions face varying problems to solve and there is a low level of infrastructure, the factors of production such as knowledge, skilled labour and "soft" infrastructure can be a way to develop the society.This entails using the local physical resources adequately for creating value with the support of people in the region to lead the analysis and search for solutions in the communities. The paper will describe the framework and programme and suggest how it could be applied in Colombia.

Knowledge management education:five Ws and one H

This panel will discuss key aspects of knowledge management (KM) education in response to challenges posed by the necessity to improve KM as a discipline and an established professional field. Through panelists' thought-provoking presentations and interactions with the audience, the discussion will address KM education from the starting why, what, who, where and when perspectives to the end result and understanding of how to approach KM education in the future.

Alignment of information systems and organisation structure:developing an executive information systems with a cybernetic method

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Human resource management in the Indian public and private sectors:an empirical comparison

This study compares human resource management (HRM) practices in Indian public- and private-sector organizations. The investigation is based on a questionnaire survey of 137 large manufacturing firms (public sector = 81: private sector = 56). The key areas of analysis include the structure of human resource (HR) department, the role of HR function in corporate change, recruitment and selection, pay and benefits, training and development, employee relations and emphasis on key HRM strategies. Internal labour markets (ILMs) are used to make the comparative analysis. The statistical results show a number of similarities and differences in the HRM systems of Indian public-and private-sector organizations. Against the established notion, the results of this study reveal that the gap between Indian private- and public-sector HRM practices is not very significant. Moreover, in a few HR functional areas (for example, compensation and training and development), Indian private-sector firms have adopted a more rational approach than their public-sector counterparts. © 2004 Taylor and Francis Ltd.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Using patient knowledge for better health systems

Purpose – This paper describes a “work in progress” research project being carried out with a public health care provider in the UK, a large NHS hospital Trust. Enhanced engagement with patients is one of the Trust’s core principles, but it is recognised that much more needs to be done to achieve this, and that ICT systems may be able to provide some support. The project is intended to find ways to better capture and evaluate the “voice of the patient” in order to lead to improvements in health care quality, safety and effectiveness. Design/methodology/approach – We propose to investigate the use of a patient-orientated knowledge management system (KMS) in managing knowledge about and from patients. The study is a mixed methods (quantitative and qualitative) investigation based on traditional action research, intended to answer the following three research questions: (1) How can a KMS be used as a mechanism to capture and evaluate patient experiences to provoke patient service change (2) How can the KMS assist in providing a mechanism for systematising patient engagement? (3) How can patient feedback be used to stimulate improvements in care, quality and safety? Originality/value –This methodology aims to involve patients at all phases of the study from its initial design onwards, thus leading to an understanding of the issues associated with using a KMS to manage knowledge about and for patients that is driven by the patients themselves. Practical implications – The outcomes of the project for the collaborating hospital will be firstly, a system for capturing and evaluating knowledge about and from patients, and then as a consequence, improved outcomes for both the patients and the service provider. More generally, it will produce a set of guidelines for managing patient knowledge in an NHS hospital that have been tested in one case example.