The Long-Term impact of Business Support? - Exploring the Role of Evaluation Timing using Micro Data

The original contribution of this work is threefold. Firstly, this thesis develops a critical perspective on current evaluation practice of business support, with focus on the timing of evaluation. The general time frame applied for business support policy evaluation is limited to one to two, seldom three years post intervention. This is despite calls for long-term impact studies by various authors, concerned about time lags before effects are fully realised. This desire for long-term evaluation opposes the requirements by policy-makers and funders, seeking quick results. Also, current ‘best practice’ frameworks do not refer to timing or its implications, and data availability affects the ability to undertake long-term evaluation. Secondly, this thesis provides methodological value for follow-up and similar studies by using data linking of scheme-beneficiary data with official performance datasets. Thus data availability problems are avoided through the use of secondary data. Thirdly, this thesis builds the evidence, through the application of a longitudinal impact study of small business support in England, covering seven years of post intervention data. This illustrates the variability of results for different evaluation periods, and the value in using multiple years of data for a robust understanding of support impact. For survival, impact of assistance is found to be immediate, but limited. Concerning growth, significant impact centres on a two to three year period post intervention for the linear selection and quantile regression models – positive for employment and turnover, negative for productivity. Attribution of impact may present a problem for subsequent periods. The results clearly support the argument for the use of longitudinal data and analysis, and a greater appreciation by evaluators of the factor time. This analysis recommends a time frame of four to five years post intervention for soft business support evaluation.

The long-term impact of business support? - Exploring the role of evaluation timing using micro data

The original contribution of this work is threefold. Firstly, this thesis develops a critical perspective on current evaluation practice of business support, with focus on the timing of evaluation. The general time frame applied for business support policy evaluation is limited to one to two, seldom three years post intervention. This is despite calls for long-term impact studies by various authors, concerned about time lags before effects are fully realised. This desire for long-term evaluation opposes the requirements by policy-makers and funders, seeking quick results. Also, current ‘best practice’ frameworks do not refer to timing or its implications, and data availability affects the ability to undertake long-term evaluation. Secondly, this thesis provides methodological value for follow-up and similar studies by using data linking of scheme-beneficiary data with official performance datasets. Thus data availability problems are avoided through the use of secondary data. Thirdly, this thesis builds the evidence, through the application of a longitudinal impact study of small business support in England, covering seven years of post intervention data. This illustrates the variability of results for different evaluation periods, and the value in using multiple years of data for a robust understanding of support impact. For survival, impact of assistance is found to be immediate, but limited. Concerning growth, significant impact centres on a two to three year period post intervention for the linear selection and quantile regression models – positive for employment and turnover, negative for productivity. Attribution of impact may present a problem for subsequent periods. The results clearly support the argument for the use of longitudinal data and analysis, and a greater appreciation by evaluators of the factor time. This analysis recommends a time frame of four to five years post intervention for soft business support evaluation.

The impact of ICT on productivity of airline industry

Airline industry is at the forefront of many technological developments and is often a pioneer in adopting such innovations in a large scale. It needs to improve its efficiency as the current trends for input prices and competitive pressures show that any airline will face increasingly challenging market conditions. This paper has focused on the relationship between ICT investments and efficiency in the airline industry and employed a two-stage analytical investigation, DEA, SFA and the Tobit regression model. In this study, we first estimate the productivity of the airline industry using a balanced panel of 17 airlines over the period 1999–2004 by the Data Envelop Analysis (DEA) and the Stochastic Frontier Analysis (SFA) methods. We then evaluate the impacts of the determinants of productivity in the industry concentrating on ICT. The results suggest that regardless of all the negative shocks to the airline industry during the sample period, ICT had a positive effect on productivity during 1999-2004.

Social capital and tacit knowledge sharing in organisational projects in Malaysian ICT companies

An increasing number of organisational researchers have turned to social capital theory in an attempt to better understand the impetus for knowledge sharing at the individual and organisational level. This thesis extends that research by investigating the impact of social capital on knowledge sharing at the group-level in the organisational project context. The objective of the thesis is to investigate the importance of social capital in fostering tacit knowledge sharing among the team members of a project. The analytical focus is on the Nahapiet and Ghoshal framework of social capital but also includes elements of other scholars' work. In brief, social capital is defined as an asset that is embedded in the network of relationships possessed by an individual or social unit. It is argued that the main dimensions of social capital that are of relevance to knowledge sharing are structural, cognitive, and relational because these, among other things, foster the exchange and combination of knowledge and resources among the team members. Empirically, the study is based on the grounded theory method. Data were collected from five projects in large, medium, and small ICT companies in Malaysia. Underpinned by the constant comparative method, data were derived from 55 interviews, and observations. The data were analysed using open, axial, and selective coding. The analysis also involved counting frequency occurrence from the coding generated by grounded theory to find the important items and categories under social capital dimensions and knowledge sharing, and for further explaining sub-groups within the data. The analysis shows that the most important dimension for tacit knowledge sharing is structural capital. Most importantly, the findings also suggest that structural capital is a prerequisite of cognitive capital and relational capital at the group-level in an organisational project. It also found that in a project context, relational capital is hard to realise because it requires time and frequent interactions among the team members. The findings from quantitative analysis show that frequent meetings and interactions, relationship, positions, shared visions, shared objectives, and collaboration are among the factors that foster the sharing of tacit knowledge among the team members. In conclusion, the present study adds to the existing literature on social capital in two main ways. Firstly, it distinguishes the dimensions of social capital and identifies that structural capital is the most important dimension in social capital and it is a prerequisite of cognitive and relational capital in a project context. Secondly, it identifies the causal sequence in the dimension of social capital suggesting avenues for further theoretical and empirical work in this emerging area of inquiry.

Studies of solar radiation and its measurement

A mathematical model has been developed for predicting the spectral distribution of solar radiation incident on a horizontal surface. The solar spectrum in the wavelength range 0.29 to 4.0 micrometers has been divided in 144 intervals. Two variables in the model are the atmospheric water vapour content and atmospheric turbidity. After allowing for absorption and scattering in the atmosphere, the spectral intensity of direct and diffuse components of radiation are computed. When the predicted radiation levels are compared with the measured values for the total radiation and the values with glass filters RG715, RG630 and OG530, a close agreement (± 5%) has been achieved under clear sky conditions. A solar radiation measuring facility, close to the centre of Birmingham, has been set up utilising a microcomputer based data logging system. A suite of computer programs in the BASIC programming language has been developed and extensively tested for solar radiation data, logging, analysis and plotting. Two commonly used instruments, the Eppley PSP pyranometer and the Kipp and Zonen CM5 pyranometer, have been compared under different experimental conditions. Three models for computing the inclined plane irradiation, using total and diffuse radiation on a horizontal surface, have been tested for Birmingham. The anisotropic-alI-sky model, proposed by Klucher, provides a good agreement between the measured and the predicted radiation levels. Measurements of solar spectral distribution, using glass filters, are also reported for a number of inclines facing South.

A comparison of U.S. and Japanese management systems and their transferability to Singapore industry

This research compares U.S. and Japanese management systems and evaluates their transferability to the Singaporean manufacturing industry. The objectives were:- a) To determine the effectiveness of U.S. and Japanese management systems when applied to Singapore. b) Determine the extent of transferability of U.S. and Japanese management systems to Singapore. c) Survey general problems ecountered in the application of U.S. and Japanese management systems to the Singapore industry. The study using questionnaire survey and interviews covered a total of eighty companies from four groups of firms in four industrial sectors comprising of U.S. and Japanese subsidiaries based in Singapore and their respective parent companies. Data from the questionnaires and interviews were used to investigate environmental conditions, management philosophy, management functions/practices, management effectiveness, and firm productivity. Two-way analysis of variance was used to analyse the questionnaire data. The analysis of the perceptual data from the questionnaire survey and interviews suggested that both U.S. and Japanese parent companies performed better in almost all the management variables studied when compared to their subsidiaries in Singapore. U.S. subsidiaries have less difficulty in adjusting to the Singapore environmental conditions and obtained better results than the Japanese subsidiaries in management functions/practices and management philosophy than the U.S. subsidiaries. In addition, the firm productivity (in terms of labour and capital productivity) of U.S. subsidiaries in Singapore was found to be higher than those of the Japanese subsidiaries. It was found that the Japanese parent companies returned the highest score among the four groups of firms in all the four industrial sectors for all the four management variables (i.e. environmental conditions, management philosophy, management functions/practices, and management effectiveness) surveyed using questionnaires. In contrast, the average score for Japanese subsidiaries in Singapore was generally the lowest among the four groups of firms. Thus the results of this study suggest that the transfer of U.S. management system into the Singapore industry is more successful than the Japanese management system. The problems encountered in the application of U.S. and Japanese management in Singapore were identified and discussed by the study. General recommendations for the Singaporean manufacturing industry were then made based on the findings of the questionnaire survey and interview analysis.

Decompression illness and its regulation in contemporary UK tunnelling : an engineering perspective:an engineering perspective

This thesis records the findings of a retrospective study of decompression illness (DCI) in the UK compressed air tunnelling industry since the mid-1980s. The thesis describes how the study arose, its scope and objectives, along with an overview of tunnelling and shaft-sinking. The development of compressed air working techniques is reviewed along with a description of decompression practice and DCI, and an outline of relevant legislation and guidance. The acquisition and manipulation of data to form a number of databases and spreadsheets on which the analysis was performed is discussed. That analysis examined measures of DCI incidence and quantified that incidence using these measures. Also considered is the variation in tolerance and susceptibility to DCI in the workforce, and the phenomenon of acclimatisation. An examination of the extent to which men worked on multiple contracts and the variation in their susceptibility to DCI on these contracts is included. Options are then considered for reducing the incidence of DCI. The first retained air-only decompression through the application of restrictions on exposure. The second related to the use of oxygen decompression. Finally the adequacy of the existing Regulations and Guidance is considered and recommendations made for possible changes to them, arising from the study. The main conclusions are that a number of measures of DCI incidence were identified, some more appropriate than others and that the incidence of DCI when so measured was high, disproportionately so in shift workers. No reasonably practicable restrictions on exposure were identified which would have allowed the retention of air-only decompression. Oxygen decompression looked promising but had yet to be used sufficiently extensively to generate enough data for analysis. Recommendations included one that an alternative technique for monitoring the effectiveness of decompression should be developed. The thesis ends with recommendations for further research.

Reflecting on time, timing and timeliness in public sector supply networks

Despite recent research on time (e.g. Hedaa & Törnroos, 2001), consideration of the time dimension in data collection, analysis and interpretation in research in supply networks is, to date, still limited. Drawing on a body of literature from organization studies, and empirical findings from a six-year action research programme and a related study of network learning, we reflect on time, timing and timeliness in interorganizational networks. The empirical setting is supply networks in the English health sector wherein we identify and elaborate various issues of time, within the case and in terms of research process. Our analysis is wide-ranging and multi-level, from the global (e.g. identifying the notion of life cycles) to the particular (e.g. different cycle times in supply, such as daily for deliveries and yearly for contracts). We discuss the ‘speeding up’ of inter-organizational ‘e’ time and tensions with other time demands. In closing the paper, we relate our conclusions to the future conduct of the research programme and supply research more generally, and to the practice of managing supply (in) networks.